FreeCalypso > hg > fc-magnetite
view src/g23m-aci/aci/psa_mtst.c @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | 53929b40109c |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-PS (6147) | Modul : PSA_MTST +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : send primitiv to MTST in order to connect him with UART +----------------------------------------------------------------------------- */ #ifndef ATI_MMI_C #define ATI_MMI_C #endif #include "aci_all.h" /*===== INCLUDES ===================================================*/ #include "aci_cmh.h" #include "ati_cmd.h" #include "aci_io.h" #include "aci_cmd.h" #include "dti.h" /* functionality of the dti library */ #include "aci_mem.h" #include "aci_cmd.h" #include "aci.h" #ifdef FF_TRACE_OVER_MTST #define CONFIG_DTI_MTST 0x4711 typedef struct { char str[100]; } T_CONFIG_DTI_MTST; GLOBAL SHORT psaMTST_Switch_Trace (UBYTE dti_id, T_DTI_ENTITY_ID conn_peer_Id, BOOL switch_on) { char primString[100]; CHAR *p_ent_name; TRACE_FUNCTION("psaMTST_Switch_Trace"); switch( conn_peer_Id ) { case( DTI_ENTITY__UART ): p_ent_name = &UART_NAME[0]; break; case( DTI_ENTITY_MTST ): p_ent_name = &MTST_NAME[0]; break; default: return PEI_ERROR; } if (switch_on) { /* build config string */ sprintf (primString, "CONFIG %s %d %d", p_ent_name, 0/*tui*/, dti_id); } else { sprintf (primString, "CONFIG STOP"); } { /* send config primitive to MTST */ PALLOC (prim, CONFIG_DTI_MTST); D2P(prim)->opc |= SYS_MASK; strcpy (prim->str, primString); PSEND (hCommMTST, prim); } /* */ return PEI_OK; } #endif /* FF_TRACE_OVER_MTST */