FreeCalypso > hg > fc-magnetite
view src/g23m-aci/aci/psa_psi.h @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | 53929b40109c |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-PS (6147) | Modul : PSA_PSI +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Definitions for the protocol stack adapter Protocol Stack Interface (PSI ) +----------------------------------------------------------------------------- */ #ifdef FF_PSI #ifndef PSA_PSI_H #define PSA_PSI_H #include "dti_conn_mng.h" #include "psa_uart.h" #ifndef P_BAT_H #ifdef FF_BAT #include "p_bat.h" #endif /* FF_BAT */ #endif /*==== CONSTANTS ==================================================*/ #define PSI_DTI_FLOW_OFF 1 #define PSI_DTI_SB_BIT 2 #define PSI_DTI_SA_BIT 4 #define PSI_RING_RUNNING 8 /*==== TYPES ======================================================*/ typedef enum{ PSI_CONNECT_DTI = 0, PSI_DISCONNECT_DTI }T_DTI_MNG_PSI_MODE; typedef struct { T_ACI_DTR_BEHAVIOUR dtr_behaviour; BOOL dtr_clearcall; BOOL reconnect_to_aci; } T_PSI_SHRD_PRM; #ifdef FF_BAT typedef struct aci_bat_queue_entry_s { struct aci_bat_queue_entry_s *next; T_BAT_cmd_send cmd; /* defined in p_bat.h */ U8 client_id; } T_aci_bat_queue_entry; typedef struct { T_aci_bat_queue_entry *first; T_aci_bat_queue_entry *last; } T_aci_bat_queue; typedef struct { T_BAT_ctrl_params curCmd; /* what is the currently running command */ BOOL opened; /* there was a bat_open() at application */ BOOL atd_live; /* TRUE while waiting for a final response to ATD */ T_desc2 *send_data; /* due to L2P makes our life hard */ } T_bat_aci_client_maintain; #ifdef _SIMULATION_ typedef unsigned short T_BAT_client; typedef struct { T_BAT_client client; T_BAT_cmd_response *response; } T_ACI_BAT_RES; #endif #endif /* FF_BAT */ typedef struct { U32 devId; UBYTE dlci; UBYTE srcId; /* = c_id */ T_ACI_DTI_REC_STATE RecState; T_ACI_DTI_LINE_STATE LineState; #ifdef FF_BAT BOOL l2p_configured; /* BAT and L2P */ void *rcv_data; /* L2P receive buffer pointer, must be freed after BAT cmd processing */ T_desc2 *send_data; /* for control channel (0xFE), due to L2P makes our life hard */ T_bat_aci_client_maintain *bat_client; /* BAT client maintenance */ U8 active_client; /* which client runs the current command */ U8 max_clients; /* maximum # of BAT clients */ T_aci_bat_queue *queue; /* pendig BAT commands */ U8 *search_str_ptr; /* CPBF and similiar candidates */ #ifdef _SIMULATION_ T_ACI_BAT_RES res; #endif #endif /* FF_BAT */ BOOL run_cmd; BOOL first_output; BYTE data_cntr; /* DTI line flags (eg. SB-BIT) */ T_ACI_UART_MUX_PARMS *MuxParms; BOOL large_type; /* is it a large output ? */ T_ACI_DTI_DATA_BUF data_buffer; T_ACI_DEVICE_TYPE device_type; S16 index1; /* remember for multi line response cmds the current index */ S16 index2; /* remember for multi line response cmds the current index */ } T_ACI_DTI_PRC_PSI; /*==== PROTOTYPES =================================================*/ EXTERN void psaPSI_ConnRej ( U32 devId); EXTERN void psaPSI_ConnRes ( U32 devId); EXTERN void psaPSI_CloseReq ( U32 devId); EXTERN void psaPSI_DTICloseReq ( U32 devId, U32 link_id); EXTERN void psaPSI_DTIOpenReq ( U32 devId, char* peer_name, ULONG link_id, UBYTE dti_direction); EXTERN void psaPSI_Dti_Req ( ULONG link_id, UBYTE peer, T_DTI_MNG_PSI_MODE con_mode); EXTERN void psa_psi_DTI_data_req (T_desc2 *data, T_ACI_DTI_PRC_PSI *src_infos, T_DTI_ENTITY_ID peer_id); EXTERN void psa_psi_DTI_getdata( UBYTE src_id, T_DTI_ENTITY_ID peer_id); EXTERN void psaPSI_DCDreq( UBYTE c_Id, UBYTE line_state ); EXTERN BOOL psaPSI_ESCAPEreq( UBYTE c_Id, UBYTE detection ); EXTERN void psaPSI_RINGreq( UBYTE c_Id, UBYTE line_state ); EXTERN void psaPSI_SetDTIReq( T_DTI_CONN_LINK_ID link_id, T_DTI_ENTITY_ID conn_peer_Id ); EXTERN BOOL atiPSI_dti_cb( UBYTE dti_id, T_DTI_CONN_STATE result_type ); #ifdef PSA_PSIP_C GLOBAL T_PSI_SHRD_PRM psiShrdPrm; #else EXTERN T_PSI_SHRD_PRM psiShrdPrm; #endif /* PSA_PSI_C */ /*==== EXPORT =====================================================*/ #endif /* PSA_PSI_H */ #endif /*FF_PSI*/ /*==== EOF =======================================================*/