view src/g23m-aci/aci/psa_raf.c @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 53929b40109c
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  PSA_RAF
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This module defines the functions for the protocol
|             stack adapter for Rate Adaptation.
+----------------------------------------------------------------------------- 
*/ 

#ifndef PSA_RAF_C
#define PSA_RAF_C
#endif

#include "aci_all.h"

#undef TRACING

/*==== INCLUDES ===================================================*/
#include "aci_cmh.h"
#include "ati_cmd.h"
#include "aci_cmd.h"

#ifdef FAX_AND_DATA
  #include "aci_fd.h"
#endif

#include "aci.h"
#include "psa.h"
#include "aci_io.h"
#include "psa_ra.h"
#include "cmh.h"
#include "cmh_ra.h"
#include "psa_util.h"

/*==== CONSTANTS ==================================================*/
#define ITM_WDT         (14)    /* item width in chars */
#define HDR_WDT         (10)    /* header width in chars */

/*==== TYPES ======================================================*/


/*==== EXPORT =====================================================*/

/*==== VARIABLES ==================================================*/

/*==== FUNCTIONS ==================================================*/

/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_RA                  |
|                                 ROUTINE : psaRA_Init              |
+-------------------------------------------------------------------+

  PURPOSE : initialize the protocol stack adapter for RA.

*/

GLOBAL void psaRA_Init ( void )
{
  extern void dll_init(void);

  memset (&raShrdPrm, 0, sizeof (T_RA_SHRD_PRM));

  dll_init ();
}

/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_RAF                 |
|                                 ROUTINE : psaRA_shrPrmDump        |
+-------------------------------------------------------------------+

  PURPOSE : this function dumps the shared parameter to the debug
            output.
*/

#ifdef TRACING
GLOBAL void psaRA_shrPrmDump ( void )
{
  char  lnBuf[80];              /* holds buffer for output line */ 
  SHORT chrNr;                  /* holds number of processed chars */
  SHORT itmIdx;

  /* --- mode --------------------------------------------------*/
  chrNr  = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, "     model" );
  for( itmIdx = 0; (itmIdx<2); itmIdx++ )
  {
    chrNr += sprintf( lnBuf+chrNr, "%*d", ITM_WDT, 
                      raShrdPrm.set_prm[itmIdx].model );
  }
  TRACE_EVENT( lnBuf );

  /* --- transmission rate -------------------------------------*/
  chrNr  = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, "trans rate" );
  for( itmIdx = 0; (itmIdx<2); itmIdx++ )
  {
    chrNr += sprintf( lnBuf+chrNr, "%*d", ITM_WDT, 
                      raShrdPrm.set_prm[itmIdx].tra_rate );
  }
  TRACE_EVENT( lnBuf );

  /* --- user rate ---------------------------------------------*/
  chrNr  = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, " user rate" );
  for( itmIdx = 0; (itmIdx<2); itmIdx++ )
  {
    chrNr += sprintf( lnBuf+chrNr, "%*d", ITM_WDT, 
                      raShrdPrm.set_prm[itmIdx].user_rate );
  }
  TRACE_EVENT( lnBuf );

  /* --- no. data bits -----------------------------------------*/
  chrNr  = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, " data bits" );
  for( itmIdx = 0; (itmIdx<2); itmIdx++ )
  {
    chrNr += sprintf( lnBuf+chrNr, "%*d", ITM_WDT, 
                      raShrdPrm.set_prm[itmIdx].ndb );
  }
  TRACE_EVENT( lnBuf );

  /* --- no. stop bits -----------------------------------------*/
  chrNr  = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, " stop bits" );
  for( itmIdx = 0; (itmIdx<2); itmIdx++ )
  {
    chrNr += sprintf( lnBuf+chrNr, "%*d", ITM_WDT, 
                      raShrdPrm.set_prm[itmIdx].nsb );
  }
  TRACE_EVENT( lnBuf );

  /* --- owner -------------------------------------------------*/
  chrNr  = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, "     owner" );

  chrNr += sprintf( lnBuf+chrNr, "%*d", ITM_WDT, raShrdPrm.owner );
  TRACE_EVENT( lnBuf );

  /* --- call id -----------------------------------------------*/
  chrNr  = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, "   call id" );

  chrNr += sprintf( lnBuf+chrNr, "%*d", ITM_WDT, raShrdPrm.cId );
  TRACE_EVENT( lnBuf );
}
#endif  /* of #ifdef TRACING */

/*==== EOF ========================================================*/