view src/g23m-aci/aci/psa_snds.c @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 53929b40109c
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  
|  Modul   :  
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This module defines the signalling functions of the
|             protocol stack adapter for the registration part of
|             the SNDCP entity.
+----------------------------------------------------------------------------- 
*/ 

#if defined (GPRS) && defined (DTI)

#ifndef PSA_SNDS_C
#define PSA_SNDS_C
#endif

#include "aci_all.h"
/*==== INCLUDES ===================================================*/
#include "aci.h"

#include "dti.h"      /* functionality of the dti library */
#include "aci_cmh.h"
#include "ati_cmd.h"
#include "aci_cmd.h"
#include "aci_mem.h"

#include "aci.h"

#include "dti_conn_mng.h"
#include "dti_cntrl_mng.h"

#include "gaci.h"
#include "gaci_cmh.h"
#include "psa.h"
#include "psa_sm.h"

#include "cmh.h"
#include "cmh_sm.h"

#if defined(FF_WAP)  || defined(FF_GPF_TCPIP)
#include "wap_aci.h"
#include "psa_tcpip.h"
#endif



/*==== CONSTANTS ==================================================*/

/*==== TYPES ======================================================*/

/*==== EXPORT =====================================================*/

/*==== VARIABLES ==================================================*/

/*==== FUNCTIONS ==================================================*/


/*
+-------------------------------------------------------------------+
| PROJECT : GPRS (8441)           MODULE  : PSA_SMS                 |
| STATE   : finished              ROUTINE : psaSNDCP_Dti_Req        |
+-------------------------------------------------------------------+

  PURPOSE : Request of setting or removing the DTI user plane..

*/
GLOBAL void psa_sn_dti_req( T_DTI_CONN_LINK_ID  link_id, T_DTI_ENTITY_ID peer, U8 dti_conn )
{
  T_PDP_CONTEXT_INTERNAL *p_pdp_context_node = pdp_context_find_node_from_cid(work_cids[cid_pointer]);  /* Issue 27457 */
#ifdef _SIMULATION_
  U8 *dti_neighbor = NULL;
#endif

#if defined (FF_WAP) || defined (FF_GPF_TCPIP)
  U8 cid = PDP_CONTEXT_CID_OMITTED;
  U8 nsapi;
#endif

  U8 dti_direction = NAS_HOME;

  PALLOC (sn_dti_req, SN_DTI_REQ);

  TRACE_FUNCTION("psa_sn_dti_req()");

#ifdef _SIMULATION_
  ACI_MALLOC(dti_neighbor, NAS_SIZE_ENTITY_NAME);
#endif

  if (dti_conn EQ NAS_CONNECT_DTI)
  {

    switch ( peer )
    {
      case DTI_ENTITY_PPPS:

#ifdef _SIMULATION_
        strcpy((char*)(dti_neighbor), PPP_NAME);
#else
        sn_dti_req->dti_neighbor = (ULONG)PPP_NAME;
#endif        
        dti_direction = NAS_HOME;
        p_pdp_context_node->internal_data.entity_id = peer;
        p_pdp_context_node->internal_data.link_id   = link_id;
        break;

#ifdef TI_DUAL_MODE
      case DTI_ENTITY_SNDCP:

#ifdef _SIMULATION_
        strcpy((char*)(dti_neighbor), SNDCP_NAME);
#else
        sn_dti_req->dti_neighbor = (ULONG)SNDCP_NAME;
#endif
        dti_direction = NAS_HOME;
        break;
#endif /* TI_DUAL_MODE */

#ifdef FF_TCP_IP
      case DTI_ENTITY_AAA:

#ifdef _SIMULATION_
        strcpy((char*)(dti_neighbor), RIV_NAME);
#else
        sn_dti_req->dti_neighbor = (ULONG)RIV_NAME;
#endif        
        dti_direction = NAS_NEIGHBOR;
        p_pdp_context_node->internal_data.entity_id = peer;
        p_pdp_context_node->internal_data.link_id   = link_id;
        break;
#endif /* FF_TCP_IP */

      case DTI_ENTITY_IP:

#ifdef _SIMULATION_
        strcpy((char*)(dti_neighbor), IP_NAME);
#else
        sn_dti_req->dti_neighbor = (ULONG)IP_NAME;
#endif
        dti_direction = NAS_NEIGHBOR;
        p_pdp_context_node->internal_data.link_id = link_id;
        break;
      case DTI_ENTITY_SIM:

#ifdef _SIMULATION_
        strcpy((char*)(dti_neighbor), SIM_NAME);
#else
        sn_dti_req->dti_neighbor = (ULONG)SIM_NAME;
#endif
        dti_direction = NAS_NEIGHBOR;
        p_pdp_context_node->internal_data.link_id = link_id;
        break;
      case DTI_ENTITY_PKTIO:

#ifdef _SIMULATION_
        strcpy((char*)(dti_neighbor), PKTIO_NAME);
#else
        sn_dti_req->dti_neighbor = (ULONG)PKTIO_NAME;
#endif
        dti_direction = NAS_HOME;
        p_pdp_context_node->internal_data.entity_id = peer;
        p_pdp_context_node->internal_data.link_id   = link_id;
        break;
#ifdef FF_GPF_TCPIP
      case DTI_ENTITY_TCPIP:
        sn_dti_req->dti_neighbor = (ULONG)TCPIP_NAME;
        dti_direction = NAS_NEIGHBOR;
        break;
#endif /* FF_GPF_TCPIP */

    }

    /* Copy the neighbor name (incl. the zero termination). */
#ifdef _SIMULATION_
    memcpy( &sn_dti_req->dti_neighbor, dti_neighbor, strlen((const char *)dti_neighbor) + 1 );
    ACI_MFREE( dti_neighbor );
#endif
    sn_dti_req->dti_direction = dti_direction;
    sn_dti_req->dti_conn      = NAS_CONNECT_DTI;
  }
  else /* if (dti_conn == SNDCP_CONNECT_DTI) */
  {
    sn_dti_req->dti_conn   = NAS_DISCONNECT_DTI;
  }

  sn_dti_req->dti_linkid    = link_id;
  sn_dti_req->nsapi         = (U8)CID_TO_NSAPI( gaci_get_cid_over_link_id( link_id ) );
#if defined (FF_WAP) || defined (FF_GPF_TCPIP)
  nsapi = sn_dti_req->nsapi;
#endif
  PSEND(hCommSNDCP, sn_dti_req);
#if defined (FF_WAP) || defined (FF_GPF_TCPIP)
  if ( (Wap_Call)                    AND
       (dti_conn EQ NAS_CONNECT_DTI) )   /* TC ACISAT 530 */
  {
    cid = (U8)NSAPI_TO_CID( nsapi );
    if ( (get_state_over_cid( cid ) EQ PDP_CONTEXT_STATE_DEFINED ) OR
         (get_state_over_cid( cid ) EQ PDP_CONTEXT_STATE_ATTACHING) OR 
         (get_state_over_cid( cid ) EQ PDP_CONTEXT_STATE_DEACTIVATE_NORMAL) )  //// pinghua DCM_OPEN_CLOSE patch 20080429 start
    {
      cmhSM_activate_context();
    }
    else if ( (get_state_over_cid( cid ) EQ PDP_CONTEXT_STATE_ACTIVATED))
    {
      char c_ip_address[16];
      UBYTE* ip_address;

      TRACE_EVENT("No PDP Context Found to Activate");

      ip_address = p_pdp_context_node->internal_data.pdp_address_allocated.ip_address.ipv4_addr.a4;
      sprintf (c_ip_address, "%03u.%03u.%03u.%03u", ip_address[0],
                                                    ip_address[1],
                                                    ip_address[2],
                                                    ip_address[3] );


      psaTCPIP_Configure( NULL,
                          (UBYTE*) c_ip_address,
  	    	                NULL, 
                          NULL,
                          NULL,
                          1500, 
                          cmhSM_IP_activate_cb );     
    }
  }
#endif /* FF_WAP */
}
#endif /* GPRS */