view src/g23m-aci/aci/psa_t30.h @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 53929b40109c
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  PSA_T30
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definitions for the protocol stack adapter T30
+----------------------------------------------------------------------------- 
*/ 

#ifndef PSA_T30_H
#define PSA_T30_H

#ifdef FF_FAX

#define REPORT_MAX    128
#define MSG_SIZE_BITS 2880

/*==== CONSTANTS ==================================================*/

typedef enum
{
  NO_VLD_FS = 0,                  /* not a valid fax status */
  FS_IDL,                         /* fax idle */
  FS_SND_DOC,                     /* sending fax document */
  FS_RCV_DOC,                     /* receiving fax document */
  FS_DOC_TRF                      /* fax document transfered */
} T_T30_FXST;

/*==== TYPES ======================================================*/

typedef struct
{
  UBYTE        dir;
  USHORT       l_buf;
  UBYTE        buf[REPORT_MAX];
} T_Report;

typedef struct T30ShrdParm
{
  SHORT         cId;              /* related call id */
  UBYTE         faxStat;          /* status of fax */
  USHORT        trans_rate;       /* t30_activate_req, t30_modify_req */
  UBYTE         half_rate;        /* t30_activate_req, t30_modify_req */
  UBYTE         threshold;        /* t30_activate_req */
  UBYTE         bitord;           /* t30_activate_req */
  USHORT        frames_per_prim;  /* t30_activate_req */
  USHORT        tbs;              /* t30_activate_cnf */
  USHORT        rbs;              /* t30_activate_cnf */
  T_hdlc_info   hdlc_rcv;         /* t30_cap_ind, t30_cap_req */
  T_hdlc_info   hdlc_snd;         /* t30_cap_ind, t30_cap_req */
  UBYTE         sgn_rcv;          /* t30_sgn_ind */
  UBYTE         sgn_snd;          /* t30_sgn_req */
  UBYTE         cmpl;             /* t30_cmpl_ind */
  UBYTE         hdlc_report;      /* t30_config_req */
  U16           test_mode;        /* t30_config_req */
  USHORT        err_cause;        /* t30_error_ind */
  USHORT        eol;              /* t30_info_ind */
  T_Report      report;           /* t30_report_ind */
  UBYTE         bcs_phase;        /* ks */
  UBYTE         msg_phase;
  BOOL          T30_is_activated;
} T_T30_SHRD_PRM;

typedef struct T30TstPrmRef
{
  const char * key;               /* keyword string */
  UBYTE  id;                      /* corresponding id */
} T30_TSTPRM_REF;

/*==== PROTOTYPES =================================================*/

EXTERN SHORT psaT30_Ppm          (void);

#ifdef DTI
EXTERN void psaT30_Dti_Req    (T_DTI_CONN_LINK_ID link_id, UBYTE dti_conn);
#endif /* DTI */

#ifdef FF_FAX
EXTERN void  psaT30_Init         (void);
#endif

EXTERN SHORT psaT30_Ppm       (void);
EXTERN void  psaT30_Modify       (void);
EXTERN void  psaT30_Disconnect   (void);
EXTERN void  psaT30_Config       (void);
EXTERN void  psaT30_Capabilities (void);
EXTERN void  psaT30_Activate     (void);
EXTERN void  psaT30_Deactivate   (void);

#ifdef TRACING
EXTERN void psaT30_shrPrmDump ( void );
#endif

/*==== EXPORT =====================================================*/

#ifdef PSA_T30F_C

GLOBAL T_T30_SHRD_PRM t30ShrdPrm;

#else

EXTERN T_T30_SHRD_PRM t30ShrdPrm;

#endif /* PSA_T30F_C */

#endif /* FF_FAX */

#endif /* PSA_T30_H */

/*==== EOF =======================================================*/