FreeCalypso > hg > fc-magnetite
view src/g23m-aci/aci/psa_t30s.c @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | 53929b40109c |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-PS (6147) | Modul : PSA_T30S +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This module defines the signalling functions of the | protocol stack adapter for T30. +----------------------------------------------------------------------------- */ #if defined (DTI) || defined (FF_FAX) #ifndef PSA_T30S_C #define PSA_T30S_C #endif #include "aci_all.h" /*==== INCLUDES ===================================================*/ #include "aci_cmh.h" #include "ati_cmd.h" #include "aci_cmd.h" #include "dti.h" #include "dti_conn_mng.h" #include "dti_cntrl_mng.h" #include "aci_fd.h" #include "aci.h" #include "psa.h" #include "psa_t30.h" #include "cmh.h" #include "cmh_t30.h" /*==== CONSTANTS ==================================================*/ /*==== TYPES ======================================================*/ /*==== EXPORT =====================================================*/ /*==== VARIABLES ==================================================*/ /*==== FUNCTIONS ==================================================*/ /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : PSA_T30 | | ROUTINE : psaT30_Dti_Req | +-------------------------------------------------------------------+ PURPOSE : connect or disconnect T30 (depends on dti_conn). */ GLOBAL void psaT30_Dti_Req(T_DTI_CONN_LINK_ID link_id, UBYTE dti_conn) { T_DTI_CNTRL device_info; dti_cntrl_get_info_from_dti_id(EXTRACT_DTI_ID(link_id), &device_info); TRACE_FUNCTION ("psaT30_Dti_Req()"); { PALLOC (t30_dti_req, T30_DTI_REQ); t30_dti_req->dti_conn = dti_conn; if (device_info.dev_id EQ DTI_ENTITY_UART) strcpy((CHAR*)t30_dti_req->entity_name, UART_NAME); else if (device_info.dev_id EQ DTI_ENTITY_PSI) strcpy((CHAR*)t30_dti_req->entity_name, PSI_NAME); t30_dti_req->link_id = link_id; t30_dti_req->dti_direction = DTI_CHANNEL_TO_LOWER_LAYER; if (dti_conn EQ T30_CONNECT_DTI) { if (dti_cntrl_set_conn_parms(link_id, DTI_ENTITY_T30, DTI_INSTANCE_NOTPRESENT, DTI_SUB_NO_NOTPRESENT) EQ FALSE) { return; } } PSENDX (T30, t30_dti_req); } } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : PSA_T30 | | ROUTINE : psaT30_Activate | +-------------------------------------------------------------------+ PURPOSE : activate T30. */ GLOBAL void psaT30_Activate (void) { TRACE_FUNCTION ("psaT30_Activate()"); { PALLOC (t30_activate_req, T30_ACTIVATE_REQ); t30_activate_req->trans_rate = t30ShrdPrm.trans_rate; t30_activate_req->half_rate = t30ShrdPrm.half_rate; t30_activate_req->threshold = t30ShrdPrm.threshold; t30_activate_req->frames_per_prim = t30ShrdPrm.frames_per_prim; t30_activate_req->bitorder = t30ShrdPrm.bitord; PSENDX (T30, t30_activate_req); } } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : PSA_T30 | | ROUTINE : psaT30_Capabilities | +-------------------------------------------------------------------+ PURPOSE : send selected capabilities. */ GLOBAL void psaT30_Capabilities (void) { TRACE_FUNCTION ("psaT30_Capabilities()"); { PALLOC (t30_cap_req, T30_CAP_REQ); memcpy (&t30_cap_req->hdlc_info, &t30ShrdPrm.hdlc_snd, sizeof (T_hdlc_info)); PSENDX (T30, t30_cap_req); } } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : PSA_T30 | | ROUTINE : psaT30_Config | +-------------------------------------------------------------------+ PURPOSE : t30 configuration. */ GLOBAL void psaT30_Config (void) { TRACE_FUNCTION ("psaT30_Config()"); { PALLOC (t30_config_req, T30_CONFIG_REQ); t30_config_req->hdlc_report = t30ShrdPrm.hdlc_report; t30_config_req->test_mode = t30ShrdPrm.test_mode; PSENDX (T30, t30_config_req); } } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : PSA_T30 | | ROUTINE : psaT30_Deactivate | +-------------------------------------------------------------------+ PURPOSE : deactivate T30. */ GLOBAL void psaT30_Deactivate (void) { if (t30ShrdPrm.T30_is_activated EQ FALSE) return; else t30ShrdPrm.T30_is_activated = FALSE; TRACE_FUNCTION ("psaT30_Deactivate()"); { PALLOC (t30_deactivate_req, T30_DEACTIVATE_REQ); PSENDX (T30, t30_deactivate_req); } } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : PSA_T30 | | ROUTINE : psaT30_Disconnect | +-------------------------------------------------------------------+ PURPOSE : disconnect request. */ GLOBAL void psaT30_Disconnect (void) { TRACE_FUNCTION ("psaT30_Disconnect()"); { PALLOC (t30_sgn_req, T30_SGN_REQ); t30_sgn_req->sgn = SGN_DCN; PSENDX (T30, t30_sgn_req); } } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : PSA_T30 | | ROUTINE : psaT30_Modify | +-------------------------------------------------------------------+ PURPOSE : modification of T30. */ GLOBAL void psaT30_Modify (void) { TRACE_FUNCTION ("psaT30_Modify()"); { PALLOC (t30_modify_req, T30_MODIFY_REQ); t30_modify_req->trans_rate = t30ShrdPrm.trans_rate; t30_modify_req->half_rate = t30ShrdPrm.half_rate; PSENDX (T30, t30_modify_req); } } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : PSA_T30 | | ROUTINE : psaT30_Ppm | +-------------------------------------------------------------------+ PURPOSE : post-page message. */ GLOBAL SHORT psaT30_Ppm (void) { TRACE_FUNCTION ("psaT30_Ppm()"); { PALLOC (t30_sgn_req, T30_SGN_REQ); t30_sgn_req->sgn = t30ShrdPrm.sgn_snd; PSENDX (T30, t30_sgn_req); } return 0; } #endif /* DTI OR FF_FAX */ /*==== EOF ========================================================*/