view src/g23m-aci/aci/psa_tras.c @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 53929b40109c
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  PSA_TRAS
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  
+----------------------------------------------------------------------------- 
*/ 
#ifdef DTI

#ifndef PSA_TRAS_C
#define PSA_TRAS_C
#endif

#include "aci_all.h"

/*==== INCLUDES ===================================================*/
#include "aci_cmh.h"
#include "ati_cmd.h"
#include "aci_cmd.h"

#include "dti.h"
#include "dti_conn_mng.h"
#include "dti_cntrl_mng.h"

#include "aci.h"
#include "psa.h"
#include "cmh.h"
#include "aci_fd.h"
#include "cmh_ra.h"
#include "psa_l2r.h"
#include "dti_conn_mng.h"
#include "cmh_l2r.h"
#include "psa_uart.h"

#include "psa_util.h"
#include "psa_tra.h"

/*==== CONSTANTS ==================================================*/


/*==== TYPES ======================================================*/


/*==== EXPORT =====================================================*/


/*==== VARIABLES ==================================================*/


/*==== FUNCTIONS ==================================================*/

/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_TRA                 |
|                                 ROUTINE : psaTRA_Activate         |
+-------------------------------------------------------------------+

  PURPOSE :

*/

GLOBAL void psaTRA_Activate (void)
{
  TRACE_FUNCTION ("psaTRA_Activate()");
  TRA_is_activated = FALSE;
  {
    PALLOC (tra_activate_req, TRA_ACTIVATE_REQ);
#ifdef TI_PS_HCOMM_CHANGE
    PSEND (hCommTRA, tra_activate_req);
#else 
    PSENDX (TRA, tra_activate_req);
#endif
  }
}

/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_TRA                 |
|                                 ROUTINE : psaTRA_Dti_Req          |
+-------------------------------------------------------------------+

  PURPOSE : connect or disconnect TRA (depends on dti_conn).

*/

GLOBAL void psaTRA_Dti_Req (T_DTI_CONN_LINK_ID link_id, UBYTE dti_conn, UBYTE peer)
{
  
  UBYTE dti_id = EXTRACT_DTI_ID( link_id );

  TRACE_FUNCTION ("psaTRA_Dti_Req()");

  {
    PALLOC (tra_dti_req, TRA_DTI_REQ);

    tra_dti_req->dti_conn      = dti_conn;
    tra_dti_req->link_id       = link_id;

    if (IS_SRC_BT(dti_id))
    {
      TRACE_EVENT("psa_tras - BT_ADAPTER Act");
      strcpy((CHAR*)tra_dti_req->entity_name, BTI_NAME);
      tra_dti_req->dti_direction   = DTI_CHANNEL_TO_HIGHER_LAYER;
    }
#ifdef FF_SAT_E    
    else if (peer EQ DTI_ENTITY_SIM)
    {
      strcpy((CHAR*)tra_dti_req->entity_name, SIM_NAME);
      tra_dti_req->dti_direction   = DTI_CHANNEL_TO_HIGHER_LAYER;
    }
#endif /* FF_SAT_E */    
    else if (peer EQ DTI_ENTITY_UART)
    {
      strcpy((CHAR*)tra_dti_req->entity_name, UART_NAME);
      tra_dti_req->dti_direction   = DTI_CHANNEL_TO_LOWER_LAYER;
    }
    else
    {
      strcpy((CHAR*)tra_dti_req->entity_name, PSI_NAME);
      tra_dti_req->dti_direction   = DTI_CHANNEL_TO_LOWER_LAYER; 
    }
    if (dti_conn EQ TRA_CONNECT_DTI)
    {
      if (dti_cntrl_set_conn_parms(link_id, DTI_ENTITY_TRA, DTI_INSTANCE_NOTPRESENT, DTI_SUB_NO_NOTPRESENT) EQ FALSE)
      {
        return;
      }
    }

#ifdef TI_PS_HCOMM_CHANGE
    PSEND (hCommTRA, tra_dti_req);
#else 
    PSENDX (TRA, tra_dti_req);
#endif
  }
}


/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_TRA                 |
|                                 ROUTINE : psaTRA_Deactivate       |
+-------------------------------------------------------------------+

  PURPOSE :

*/

GLOBAL void psaTRA_Deactivate (void)
{
  TRACE_FUNCTION ("psaTRA_Deactivate()");

  if (TRA_is_activated EQ FALSE)
    return;
  else
    TRA_is_activated = FALSE;

  {
    PALLOC (tra_deactivate_req, TRA_DEACTIVATE_REQ);
#ifdef TI_PS_HCOMM_CHANGE
    PSEND (hCommTRA, tra_deactivate_req);
#else 
    PSENDX (TRA, tra_deactivate_req);
#endif
  }
}
#endif /* DTI */