view src/g23m-aci/aci/psa_udpap.c @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 53929b40109c
children
line wrap: on
line source

/*
+-----------------------------------------------------------------------------
|  Project :  GSM-PS (6147)
|  Modul   :  PSA_UDPAP
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas
|                 Instruments Berlin, AG
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+-----------------------------------------------------------------------------
|  Purpose :  This module defines the processing functions for the
|             primitives sent to the protocol stack adapter by the UDPA
|             module.
+-----------------------------------------------------------------------------
*/
#ifdef DTI
#ifdef CO_UDP_IP

#ifndef PSA_UDPAP_C
#define PSA_UDPAP_C
#endif /* of PSA_UDPAP_C */

#include "aci_all.h"
/*==== INCLUDES ===================================================*/
#include "aci_cmh.h"
#include "ati_cmd.h"
#include "aci_cmd.h"
#include "dti.h"      /* functionality of the dti library */
#include "dti_conn_mng.h"
#include "dti_cntrl_mng.h"

#include "aci_fd.h"
#include "aci.h"
#include "psa.h"
#include "psa_l2r.h"
#include "cmh.h"
#include "cmh_ra.h"
#include "cmh_l2r.h"
#include "psa_tcpip.h"
#include "psa_cc.h"

#include "wap_aci.h"
#include "psa_sat.h"

/*==== CONSTANTS ==================================================*/

/*==== TYPES ======================================================*/

/*==== EXPORT =====================================================*/

/*==== VARIABLES ==================================================*/

/*==== FUNCTIONS ==================================================*/

/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_UDPA                |
|                                 ROUTINE : psa_udpa_dti_cnf        |
+-------------------------------------------------------------------+

  PURPOSE : processes the UDPA_DTI_CNF primitive sent by UDP.

*/

GLOBAL void psa_udpa_dti_cnf(T_UDPA_DTI_CNF *udpa_dti_cnf)
{
  TRACE_FUNCTION ("psa_udpa_dti_cnf()");

  switch( udpa_dti_cnf->dti_conn )
  {
  case(UDPA_CONNECT_DTI):
    dti_cntrl_entity_connected( udpa_dti_cnf->link_id, DTI_ENTITY_UDP, DTI_OK );
    break;

  case(UDPA_DISCONNECT_DTI):
    dti_cntrl_entity_disconnected( udpa_dti_cnf->link_id, DTI_ENTITY_UDP );
    break;

  }

  PFREE(udpa_dti_cnf);
}


/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_UDPA                |
|                                 ROUTINE : psa_udpa_dti_ind        |
+-------------------------------------------------------------------+

  PURPOSE : processes the UDPA_DTI_IND primitive sent by UDP.

*/

GLOBAL void psa_udpa_dti_ind(T_UDPA_DTI_IND *udpa_dti_ind)
{
  TRACE_FUNCTION ("psa_udpa_dti_ind()");

  dti_cntrl_entity_disconnected( udpa_dti_ind->link_id, DTI_ENTITY_UDP );

  PFREE(udpa_dti_ind);
}


/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_UDPA                |
|                                 ROUTINE : psa_udpa_config_cnf     |
+-------------------------------------------------------------------+

  PURPOSE : processes the UDPA_CONFIG_CNF primitive sent by UDP.

*/

GLOBAL void psa_udpa_config_cnf(T_UDPA_CONFIG_CNF *udpa_config_cnf)
{
  TRACE_FUNCTION ("psa_udpa_config_cnf()");

  if (wap_state EQ UDPA_Configuration)
  {
    wap_state = UDPA_Configurated;
    cmhUDPA_Configurated();
  }
  else if (wap_state EQ UDPA_Deconfiguration)
  {
    wap_state = UPDA_Deconfigurated;
    cmhUDPA_Deconfigurated();
  }
  else
  {
    TRACE_EVENT("unexpected UDPA_CONFIG_CNF primitive received");
  }

  PFREE(udpa_config_cnf);
}

#endif /* CO_UDP_IP */

#endif /* DTI */