FreeCalypso > hg > fc-magnetite
view src/g23m-aci/aci/psa_udpas.c @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | 53929b40109c |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-PS (6147) | Modul : PSA_UDPAS +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : +----------------------------------------------------------------------------- */ #if defined (FF_WAP) || defined (FF_SAT_E) #ifndef PSA_UDPAS_C #define PSA_UDPAS_C #endif #include "aci_all.h" /*==== INCLUDES ===================================================*/ #include "aci_cmh.h" #include "ati_cmd.h" #include "aci_cmd.h" #include "dti.h" /* functionality of the dti library */ #include "dti_conn_mng.h" #include "dti_cntrl_mng.h" #include "aci.h" #include "psa.h" #include "psa_cc.h" #include "psa_ss.h" #include "aoc.h" #if !defined (MFW) #include "aci_io.h" #endif #include "wap_aci.h" #include "psa_tcpip.h" #include "psa_sim.h" /*==== CONSTANTS ==================================================*/ /*==== TYPES ======================================================*/ /*==== EXPORT =====================================================*/ /*==== VARIABLES ==================================================*/ /*==== FUNCTIONS ==================================================*/ /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : PSA_UDPAS | | ROUTINE : psaUDPA_Config | +-------------------------------------------------------------------+ PURPOSE : setup UDPA */ GLOBAL void psaUDPA_Config ( UBYTE dirc ) { switch( dirc ) { case ( UDPA_CONFIG_UP ): wap_state = UDPA_Configuration; { PALLOC(udpa_config_req,UDPA_CONFIG_REQ); udpa_config_req->cmd = UDPA_CONFIG_UP; PSENDX(UDP,udpa_config_req); } break; case ( UDPA_CONFIG_DOWN ): wap_state = UDPA_Deconfiguration; { PALLOC(udpa_config_req,UDPA_CONFIG_REQ); udpa_config_req->cmd = UDPA_CONFIG_DOWN; PSENDX(UDP,udpa_config_req); } break; } } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : PSA_UDPAS | | ROUTINE : psaUDPA_Dti_Req | +-------------------------------------------------------------------+ PURPOSE : connect UDP */ GLOBAL void psaUDPA_Dti_Req(T_DTI_CONN_LINK_ID dti_id, UBYTE peer_to_connect_to, UBYTE dti_conn) { PALLOC( udpa_dti_req, UDPA_DTI_REQ); TRACE_FUNCTION("psaUDPA_Dti_Req"); udpa_dti_req -> dti_conn = dti_conn; udpa_dti_req -> link_id = dti_id; if (dti_conn EQ UDPA_CONNECT_DTI) { switch( peer_to_connect_to ) { case( DTI_ENTITY_IP ): udpa_dti_req -> dti_direction = DTI_CHANNEL_TO_LOWER_LAYER; strcpy((char*)udpa_dti_req->entity_name, dti_entity_name[DTI_ENTITY_IP].name); break; case( DTI_ENTITY_WAP ): udpa_dti_req -> dti_direction = DTI_CHANNEL_TO_HIGHER_LAYER; strcpy((char*)udpa_dti_req->entity_name, dti_entity_name[DTI_ENTITY_WAP].name); if (dti_cntrl_set_conn_parms(dti_id, DTI_ENTITY_UDP, DTI_INSTANCE_NOTPRESENT, DTI_SUB_NO_NOTPRESENT) EQ FALSE) { return; } break; #ifdef FF_SAT_E case( DTI_ENTITY_SIM ): udpa_dti_req -> dti_direction = DTI_CHANNEL_TO_HIGHER_LAYER; strcpy((char*)udpa_dti_req->entity_name, dti_entity_name[DTI_ENTITY_SIM].name); break; #endif /* FF_SAT_E */ default: TRACE_EVENT("unknown conn_peer_Id: UDPA_DTI_REQ not sent"); PFREE(udpa_dti_req); return; } } PSENDX( UDP, udpa_dti_req ); } #endif /* of FF_WAP or SAT E */