FreeCalypso > hg > fc-magnetite
view src/g23m-aci/bat/bat.h @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | 53929b40109c |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-F&D (8411) | Modul : BAT library +----------------------------------------------------------------------------- | Copyright 2005 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : API for binary AT commands +----------------------------------------------------------------------------- */ #ifndef BAT_H #define BAT_H #ifndef __TYPEDEFS_H__ #include "typedefs.h" /* for customers without busybe */ #endif #include "p_bat.h" /* to include the p_bat.h */ #include "bat_types.h" /* to include the types for internal maintainance */ #include "bat_cfg.h" /* to include the configuration settings */ /********************************************************************************* * * defines * *********************************************************************************/ #define BAT_INSTANCE_HEADER_SIZE ((unsigned short)sizeof(void*)) #define BAT_INSTANCE_SIZE ((unsigned short)sizeof(T_BAT_instance_maintain) + (unsigned short)L2P_MAINTAIN_SIZE) #define BAT_CLIENT_SIZE ((unsigned short)sizeof(T_BAT_client_maintain)) /********************************************************************************* * * enumerations * *********************************************************************************/ typedef enum { BAT_OK = 0, BAT_BUSY_RESOURCE, BAT_ERROR }T_BAT_return; typedef enum { BAT_ABORT = 0, BAT_APP_READY_RESOURCE }T_BAT_event; /********************************************************************************* * * structures * *********************************************************************************/ typedef struct { T_BAT_event event; } T_BAT_ctrl; /********************************************************************************* * * function declarations * *********************************************************************************/ extern T_BAT_return bat_init (void *mem, unsigned char num); extern T_BAT_return bat_deinit (void); extern T_BAT_return bat_new (T_BAT_instance *instance, void *mem, unsigned char num, T_BAT_config *config, void (*instance_signal_cb)(T_BAT_signal signal)); extern T_BAT_return bat_delete (T_BAT_instance instance); extern T_BAT_return bat_open (T_BAT_instance instance, T_BAT_client *client, int (*response_cb)(T_BAT_client client, T_BAT_cmd_response *response), void (*signal_cb) (T_BAT_client client, T_BAT_signal signal)); extern T_BAT_return bat_uns_open(T_BAT_instance instance, T_BAT_client *client, int (*unsolicited_result_cb)( T_BAT_client client, T_BAT_cmd_response *response)); extern T_BAT_return bat_close (T_BAT_client client); extern T_BAT_return bat_send (T_BAT_client client, T_BAT_cmd_send *cmd); extern T_BAT_return bat_ctrl (T_BAT_client client, T_BAT_ctrl *ctrl); #endif /*BAT_H*/