FreeCalypso > hg > fc-magnetite
view src/g23m-aci/bat/bat_ctrl.h @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | 53929b40109c |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-F&D (8411) | Modul : ACI +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This Modul holds the functions | for the binary AT command library at APPlication side +----------------------------------------------------------------------------- */ #ifndef BAT_CTRL_H #define BAT_CTRL_H /********************************************************************************* * * enums * *********************************************************************************/ typedef enum { BATC_MAX_CLIENTS = 0x8000,/*bit 15 is 1 */ BATC_OPEN_CLIENT, BATC_CLOSE_CLIENT, BATC_ABORT_CMD } T_BATC_ctrl_params; typedef enum { BATC_MAX_CLIENTS_CNF = 0x8000, /* bit 15 is 1 */ BATC_MAX_CLIENTS_REJ, BATC_OPEN_CLIENT_CNF, BATC_OPEN_CLIENT_REJ, BATC_ABORT_COMMAND_CNF, BATC_ABORT_COMMAND_REJ } T_BATC_rsp_param; /********************************************************************************* * * structures * *********************************************************************************/ typedef struct { U32 batc_dummy; } T_BATC_no_parameter; /* actually never used */ typedef struct { U32 num_clients; } T_BATC_max_clients; /* max number of clients of an instance */ typedef struct { U32 client_id; } T_BATC_open_client; /* client to open */ typedef struct { U32 client_id; } T_BATC_close_client; /* client to close */ typedef struct { U32 client_id; } T_BATC_abort_cmd; /* client which runs the cmd */ typedef union { T_BATC_max_clients *ptr_max_clients; T_BATC_open_client *ptr_open_client; T_BATC_close_client *ptr_close_client; T_BATC_abort_cmd *ptr_abort_cmd; } T_BATC_params; typedef union { T_BATC_open_client *ptr_bat_open_client_cnf; /* confirmation from BAT to BAT Lib */ T_BATC_abort_cmd *ptr_bat_abort_command_cnf; /* confirmation from BAT to BAT Lib */ } T_BATC_rsp; typedef struct { T_BATC_ctrl_params ctrl_params; T_BATC_params params; }T_BATC_signal; typedef struct { T_BATC_rsp_param rsp_params; T_BATC_rsp rsp; }T_BATC_confirm; #endif /* BAT_CTRL_H */