FreeCalypso > hg > fc-magnetite
view src/g23m-aci/bat/bat_intern.h @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sat, 04 Jan 2020 19:27:41 +0000 |
| parents | 53929b40109c |
| children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-F&D (8411) | Modul : ACI +----------------------------------------------------------------------------- | Copyright 2005 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This Modul holds the definitions for internal use | for the binary AT command library +----------------------------------------------------------------------------- */ #ifndef BAT_INTERN_H #define BAT_INTERN_H /********************************************************************************* * * defines * *********************************************************************************/ #define BAT_CONTROL_CHANNEL 0xFE #define BAT_BROADCAST_CHANNEL 0xFF #define BAT_INVALID_CLIENT_HANDLE 0xFFFF #define BAT_INVALID_INSTANCE_HANDLE 0xFF #define GET_INST_HNDL_FROM_CLNT_HANDLE(clnt_hndl) ((U8)((clnt_hndl & 0xff00) >> 8)) #define GET_CLNT_ID_FROM_CLNT_HANDLE(clnt_hndl) ((U8)(clnt_hndl & 0xff)) #define MAKE_CLNT_HNDL(clnt_id, inst_hndl) ((U16)((clnt_id & 0x00ff)|((0x00ff & inst_hndl)<<8))) #define MAKE_UNS_CLNT_HNDL(inst_hndl) ((U16)((0x00ff & inst_hndl)<<8|0x00ff)) #ifdef NEW_FRAME #include "vsi.h" #ifndef _SIMULATION_ EXTERN T_HANDLE GDD_DIO_handle; /* include of gdd_dio.h needs a lot of other includes */ #undef TRACE_FUNCTION #define TRACE_FUNCTION(a) vsi_o_ttrace(GDD_DIO_handle,TC_EVENT,a) #undef TRACE_EVENT #define TRACE_EVENT(a) vsi_o_ttrace(GDD_DIO_handle,TC_EVENT,a) #undef TRACE_EVENT_P1 #define TRACE_EVENT_P1(f,a1) vsi_o_ttrace(GDD_DIO_handle,TC_EVENT,f,a1) #undef TRACE_EVENT_P2 #define TRACE_EVENT_P2(f,a1,a2) vsi_o_ttrace(GDD_DIO_handle,TC_EVENT,f,a1,a2) #undef TRACE_BINDUMP #define TRACE_BINDUMP(s,m,d,p,l) {vsi_o_ttrace(GDD_DIO_handle,m,d);vsi_o_primsend(GDD_DIO_handle,m,0,FRM_PCO_NAME,BIN_TRACE_OPC,p,l FILE_LINE_MACRO);} #else /* _SIMULATION_ */ EXTERN T_HANDLE aci_handle; /* include of aci.h needs a lot of additional includes */ #undef TRACE_BINDUMP #define TRACE_BINDUMP(s,m,d,p,l) {vsi_o_ttrace(aci_handle,m,d);vsi_o_primsend(aci_handle,m,0,FRM_PCO_NAME,BIN_TRACE_OPC,p,l FILE_LINE_MACRO);} #endif /* _SIMULATION_ */ #define BAT_TRACE_ERROR(a) TRACE_ERROR(a) #define BAT_TRACE_FUNCTION(a) TRACE_FUNCTION(a) #define BAT_TRACE_EVENT(a) TRACE_EVENT(a) #define BAT_TRACE_EVENT_P1(f,a1) TRACE_EVENT_P1(f,a1) #define BAT_TRACE_EVENT_P2(f,a1,a2) TRACE_EVENT_P2(f,a1,a2) #define BAT_TRACE_BINDUMP(s,m,d,p,l) TRACE_BINDUMP(s,m,d,p,l) #else /* NEW_FRAME */ #define BAT_TRACE_ERROR(a) ((void)(0)) #define BAT_TRACE_FUNCTION(a) ((void)(0)) #define BAT_TRACE_EVENT(a) ((void)(0)) #define BAT_TRACE_EVENT_P1(f,a1) ((void)(0)) #define BAT_TRACE_EVENT_P2(f,a1,a2) ((void)(0)) #define BAT_TRACE_BINDUMP(s,m,d,p,l) ((void)(0)) typedef int T_HANDLE; /* in case of BAT Lib dos not run under GPF */ #endif /* NEW_FRAME */ /*==== GLOBAL VARS =================================================================*/ GLOBAL void bat_change_client_state (T_BAT_client_maintain *client, T_BAT_client_state new_state); GLOBAL void bat_change_instance_state (T_BAT_instance_maintain *instance, T_BAT_instance_state new_state); GLOBAL void bat_change_buffer_state (T_BAT_instance_maintain *instance, T_BAT_buf_state new_state); T_BAT_return bat_init_global_params (void); T_BAT_return bat_deinit_global_params (void); T_BAT_return bat_init_instance_pointer (T_BAT_instance inst_hndl, T_BAT_instance_maintain *inst_mt); T_BAT_return bat_deinit_instance_pointer (T_BAT_instance inst_hndl); BOOL bat_check_init_or_deinit (BOOL is_init); BOOL bat_check_if_all_instances_are_closed (void); BOOL bat_check_if_all_clients_are_closed (T_BAT_instance inst_hndl); T_BAT_return bat_get_new_instance (T_BAT_instance *instance); T_BAT_return bat_delete_instance (T_GDD_CON_HANDLE con_handle); T_BAT_return bat_get_instance_from_gdd_handle (T_GDD_CON_HANDLE con_handle, T_BAT_instance *instance_handle, T_BAT_instance_maintain **instance); T_BAT_return bat_get_instance_from_client_handle (T_BAT_client client_handle, T_BAT_instance_maintain **instance); T_BAT_return bat_get_new_client (T_BAT_instance instance, T_BAT_client *client); T_BAT_return bat_init_new_client (T_BAT_client client, int(*response_cb)( T_BAT_client client, T_BAT_cmd_response *rsp), void(*signal_cb)( T_BAT_client client, T_BAT_signal)); T_BAT_return bat_make_client_handle_from_gdd_and_client_id (T_GDD_CON_HANDLE con_handle, U8 client_id, T_BAT_client *client); T_BAT_return bat_get_client_from_client_handle (T_BAT_client client, T_BAT_client_maintain **client_maintain); T_BAT_return bat_response_rcv (T_BAT_instance inst_hndl, T_BAT_cmd_response *rsp); T_BAT_return bat_unsolicited_code_rcv (T_BAT_instance inst_hndl, T_BAT_cmd_response *rsp); T_BAT_return bat_get_instance_from_instance_handle (T_BAT_instance instance, T_BAT_instance_maintain **inst_mt); T_BAT_return bat_control_confirm_rcv (T_BAT_instance inst_hndl, T_BATC_confirm cnf); T_BAT_return bat_command_response_rcv (T_BAT_instance inst_hndl, U8 clnt_id, T_BAT_cmd_response *rsp); T_BAT_return bat_send_cmd_data (T_BAT_client clnt_hndl, T_BAT_cmd_send *data); T_BAT_return bat_send_ctrl_data (T_BAT_instance inst_hndl, T_BATC_signal *data); /* callbacks for GDD */ void bat_gdd_signal_cb (T_GDD_CON_HANDLE con, T_GDD_SIGNAL signal); GDD_RESULT bat_gdd_receive_data_cb (T_GDD_CON_HANDLE con, T_GDD_BUF *buf); BOOL bat_l2p_receive (U8 inst_hndl, T_GDD_BUF *buf); /* callbacks for L2P */ void *bat_l2p_get_tx_buffer(U8 inst_hndl, U16 data_size, void **seg_hdr_ptr, U16 *total_size, U16 *seg_size); int bat_l2p_send_frame(U8 inst_hndl); void *bat_l2p_get_rx_buffer(U8 inst_hndl); void bat_l2p_message_rxd (U8 inst_hndl, U8 client_id, U32 data_tag, void *data_ptr, U16 data_size); void *bat_l2p_get_next_buf_seg (U8 inst_hndl, void *seg_hdr, void **seg_hdr_ptr, U16 *segSize); #endif /* BAT_INTERN_H */