FreeCalypso > hg > fc-magnetite
view src/g23m-aci/gdd_dio/gdd_dio_data.h @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | 53929b40109c |
children |
line wrap: on
line source
/* +------------------------------------------------------------------------------ | File: gdd_dio_data.h +------------------------------------------------------------------------------ | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Internal data structures for entity gdd_dio (DIO BAT Adapter) +----------------------------------------------------------------------------- */ #ifndef GDD_DIO_DATA_H #define GDD_DIO_DATA_H /*==== INCLUDES =============================================================*/ /* DIO stuff */ #include "dio.h" /* for T_DIO_CAP_PKT */ /* We must define P_DIO_H, in order to avoid inclusion of p_dio.h. This is necessary due to the special fact, that "dio.h", which is included in the header "dio_io/dio_drv.h", mirrors the header "p_dio.h". */ #define P_DIO_H #include "gdd.h" #include "gdd_dio_queue.h" /* for T_GDD_BUF_QUEUE */ /*==== DEFINITIONS ==========================================================*/ #define GDD_CON_HANDLE_USER_MASK 0xFF000000 /*==== CONSTS ===============================================================*/ /*==== TYPES =================================================================*/ /** * States of kernel service */ typedef enum { GDD_DIO_KER_DEAD = 0, GDD_DIO_KER_INIT, GDD_DIO_KER_READY } T_GDD_DIO_KER_STATE; /** * Kernel service data */ typedef struct { T_GDD_DIO_KER_STATE state; } T_GDD_DIO_KER_DATA; /** * States of a single connection */ typedef enum { GDD_DIO_CON_DEAD = 1, GDD_DIO_CON_CONNECT, GDD_DIO_CON_READY, GDD_DIO_CON_SENDING, GDD_DIO_CON_CLOSE } T_GDD_DIO_CON_STATE; /** * Connection data */ typedef struct { T_GDD_BUF_QUEUE rx_queue; /* RX buffer queue */ T_GDD_BUF_QUEUE tx_queue; /* TX buffer queue */ UBYTE con_state; /* Connection state */ UBYTE wait_send_buf; /* Flag indicating that we wait for a send buffer */ U32 dio_device; /* Dio device type */ T_GDD_RECEIVE_DATA_CB rcv_cb; /* Receive callback of the client */ T_GDD_SIGNAL_CB sig_cb; /* Signale callback of the client */ T_DIO_CAP_PKT dio_cap; /* DIO capabilities */ } T_GDD_DIO_CON_DATA; /** * DIO driver number */ typedef U32 T_GDD_DIO_DRV_NUM; /*==== EXPORTS ===============================================================*/ int inst_num_from_dev_id(U32 device); #endif /* !GDD_DIO_DATA_H */