FreeCalypso > hg > fc-magnetite

view src/g23m-aci/uart/uart_txs.h @ 632:d968a3216ba0

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 53929b40109c
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  
|  Modul   :  
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definitions for uart_txs.c 
+----------------------------------------------------------------------------- 
*/ 

#ifndef UART_TXS_H
#define UART_TXS_H


EXTERN void sig_ker_tx_dead_mode_req (void);

EXTERN void sig_ker_tx_ready_mode_req (void);

EXTERN void sig_ker_tx_mux_mode_req (void);

EXTERN void sig_drx_tx_data_available_ind (UBYTE   dlc_instance,
                                           T_desc2* transmit_data, 
                                           USHORT  transmit_pos);

EXTERN void sig_ker_tx_data_available_req (T_desc2* transmit_data, 
                                           USHORT  transmit_pos);

EXTERN void sig_drx_tx_data_not_available_ind (UBYTE dlc_instance);

EXTERN void sig_ker_tx_data_not_available_req (void);

EXTERN void sig_ker_tx_line_states_req (UBYTE dlc_instance);

EXTERN void sig_ker_tx_flush_req (void);

EXTERN void sig_ker_tx_restart_write_req (void);

#endif /* !UART_TXS_H */