FreeCalypso > hg > fc-magnetite
view src/g23m-fad/fad/fad_pei.c @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | 90eb61ecd093 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : | Modul : +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This module implements the process body interface | for the component Fax Adaptation 3.45 of the mobile station. +----------------------------------------------------------------------------- */ #ifndef FAD_PEI_C #define FAD_PEI_C #endif #define ENTITY_FAD /*==== INCLUDES ===================================================*/ #include <string.h> #include <stdlib.h> #include <stddef.h> #include "typedefs.h" #include "pcm.h" #include "vsi.h" #include "custom.h" #include "gsm.h" #include "message.h" #include "ccdapi.h" #include "prim.h" #include "cus_fad.h" #include "cnf_fad.h" #include "mon_fad.h" #include "pei.h" #include "tok.h" #include "fad.h" /*==== CONST ======================================================*/ /*==== VAR EXPORT =================================================*/ /*==== VAR LOCAL ==================================================*/ LOCAL BOOL first_access = TRUE; LOCAL T_MONITOR fad_mon; /*==== FUNCTIONS ==================================================*/ /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : FAD_PEI | | STATE : code ROUTINE : pei_not_supported | +--------------------------------------------------------------------+ PURPOSE : An unsupported primitive is received. */ LOCAL void pei_not_supported (void *data) { TRACE_FUNCTION ("pei_not_supported()"); PFREE (data); } /* * * Use MAK_FUNC_0 for primitives which contains no SDU. * * Use MAK_FUNC_S for primitives which contains a SDU. */ /* * jumptable for the entity service access point. Contains * the processing-function addresses and opcodes of * request and response primitives. * */ LOCAL const T_FUNC fad_table[] = { MAK_FUNC_0( ker_fad_activate_req , FAD_ACTIVATE_REQ ), MAK_FUNC_0( ker_fad_deactivate_req, FAD_DEACTIVATE_REQ ), MAK_FUNC_0( ker_fad_modify_req, FAD_MODIFY_REQ ), MAK_FUNC_S( ker_fad_data_req, FAD_DATA_REQ ), MAK_FUNC_0( ker_fad_snd_tcf_req, FAD_SND_TCF_REQ ), MAK_FUNC_0( ker_fad_rcv_tcf_req, FAD_RCV_TCF_REQ ), MAK_FUNC_0( ker_fad_ready_req, FAD_READY_REQ ), MAK_FUNC_0( ker_fad_ignore_req , FAD_IGNORE_REQ ) }; /* * jumptable for the service access point which are used by * the entity. Contains the processing-function addresses and * opcodes of indication and confirm primitives. * */ LOCAL const T_FUNC ra_table[] = { MAK_FUNC_0( snd_ra_ready_ind, RA_READY_IND ), MAK_FUNC_S( rcv_ra_data_ind, RA_DATA_IND ) }; /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : FAD_PEI | | STATE : code ROUTINE : pei_primitive | +--------------------------------------------------------------------+ PURPOSE : Process protocol specific primitive. */ LOCAL SHORT pei_primitive (void * ptr) { T_PRIM *prim = ptr; /* * @ADAPT@ * | * T30 UPPER LAYER * | * v * +-----------(fad)----------+ * | | * | FAD | * | | * +-------------^------------+ * | * RA LOWER LAYER * | * */ TRACE_FUNCTION ("pei_primitive()"); if (prim NEQ NULL) { ULONG opc = prim->custom.opc; USHORT n; const T_FUNC *table; VSI_PPM_REC ((T_PRIM_HEADER *)prim, __FILE__, __LINE__); PTRACE_IN (opc); fad_data = GET_INSTANCE (prim); switch (SAP_NR(opc)) { case SAP_NR(FAD_UL): table = fad_table; n = TAB_SIZE (fad_table); break; case SAP_NR(RA_DL ): table = ra_table; n = TAB_SIZE (ra_table); break; default : table = NULL; n = 0; break; } if (table NEQ NULL ) { if (PRIM_NR(opc) < n) { table += PRIM_NR(opc); #ifdef PALLOC_TRANSITION P_SDU(prim) = table->soff ? (T_sdu*) (((char*)&prim->data) + table->soff) : 0; #ifndef NO_COPY_ROUTING P_LEN(prim) = table->size + sizeof (T_PRIM_HEADER); #endif /* NO_COPY_ROUTING */ #endif /* PALLOC_TRANSITION */ JUMP (table->func) (P2D(prim)); } else { pei_not_supported (P2D(prim)); } return PEI_OK; } /* * Primitive is no GSM Primitive * then forward to the environment */ #ifdef GSM_ONLY PFREE (P2D(prim)) return PEI_ERROR; #else if (opc & SYS_MASK) vsi_c_primitive (VSI_CALLER prim); else { PFREE (P2D(prim)); return PEI_ERROR; } #endif } return PEI_OK; } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : FAD_PEI | | STATE : code ROUTINE : pei_init | +--------------------------------------------------------------------+ PURPOSE : Initialize Protocol Stack Entity */ LOCAL SHORT pei_init (T_HANDLE handle) { TRACE_FUNCTION ("pei_init()"); fad_handle = handle; if (hCommT30 < VSI_OK) { if ((hCommT30 = vsi_c_open (VSI_CALLER T30_NAME)) < VSI_OK) return PEI_ERROR; } #ifdef _SIMULATION_ if (hCommRA < VSI_OK) { if ((hCommRA = vsi_c_open (VSI_CALLER RA_NAME)) < VSI_OK) return PEI_ERROR; } #endif fad_data = &fad_data_base[0]; fad_data_magic_num = 0; /* memory is not yet initialized */ return PEI_OK; } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : FAD_PEI | | STATE : code ROUTINE : pei_timeout | +--------------------------------------------------------------------+ PURPOSE : Process timeout */ LOCAL SHORT pei_timeout (USHORT index) { fad_exec_timeout (index); return PEI_OK; } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : FAD_PEI | | STATE : code ROUTINE : pei_signal | +--------------------------------------------------------------------+ PURPOSE : Functional interface to signal a primitive. */ LOCAL SHORT pei_signal (ULONG opc, void *primData) { #ifdef OPTION_SIGNAL if (fad_data_magic_num NEQ FAD_DATA_MAGIC_NUM) /* memory is not initialized */ { /* ignore received signals */ return PEI_OK; } fad_data = GET_INSTANCE (primData); switch (opc) { case RA_DATA_IND: rcv_ra_data_ind ( (T_RA_DATA_IND *)primData ); break; case RA_READY_IND: snd_ra_ready_ind ( (T_RA_READY_IND *)primData ); break; } #endif return PEI_OK; } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : FAD_PEI | | STATE : code ROUTINE : pei_exit | +--------------------------------------------------------------------+ PURPOSE : Close Resources and terminate */ LOCAL SHORT pei_exit (void) { TRACE_FUNCTION ("pei_exit()"); /* * clean up communication */ vsi_c_close (VSI_CALLER hCommT30); hCommT30= VSI_ERROR; return PEI_OK; } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : FAD_PEI | | STATE : code ROUTINE : pei_config | +--------------------------------------------------------------------+ PURPOSE : Dynamic Configuration */ #if !defined (NCONFIG) LOCAL KW_DATA kwtab[] = { "", 0 }; #endif LOCAL SHORT pei_config (T_PEI_CONFIG inString) { #if !defined (NCONFIG) char *s = inString; char *keyw; char *val [10]; TRACE_FUNCTION ("pei_config()"); TRACE_EVENT (s); tok_init (s); /* * Parse next keyword and number of variables */ while (tok_next(&keyw,val) NEQ TOK_EOCS) { switch (tok_key((KW_DATA *)kwtab, keyw)) { case TOK_NOT_FOUND: TRACE_ERROR ("[PEI_CONFIG]: Illegal Keyword"); break; default: break; } } #endif return PEI_OK; } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : FAD_PEI | | STATE : code ROUTINE : pei_monitor | +--------------------------------------------------------------------+ PURPOSE : Monitoring of physical Parameters */ LOCAL SHORT pei_monitor (void **monitor) { TRACE_FUNCTION ("pei_monitor()"); fad_mon.version = VERSION_FAD; *monitor = &fad_mon; return PEI_OK; } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : FAD_PEI | | STATE : code ROUTINE : pei_create | +--------------------------------------------------------------------+ PURPOSE : Create the Protocol Stack Entity */ /*lint -e714 : Symbol not referenced */ /*lint -e765 : external could be made static */ GLOBAL SHORT fad_pei_create (T_PEI_INFO **info) { static const T_PEI_INFO pei_info = { "FAD", { pei_init, pei_exit, pei_primitive, pei_timeout, pei_signal, NULL, /* no run function */ pei_config, pei_monitor }, 1024, /* Stack Size */ 10, /* Queue Entries */ 215, /* Priority */ 0, /* number of timer */ 0x03|PRIM_NO_SUSPEND /* flags */ }; TRACE_FUNCTION ("pei_create()"); /* * Close Resources if open */ if (first_access) first_access = FALSE; else pei_exit (); /* * Export startup configuration data */ *info = (T_PEI_INFO *)&pei_info; return PEI_OK; }