FreeCalypso > hg > fc-magnetite
view src/g23m-gprs/cl/cl_nwrl.c @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | 219afcfc6250 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GPRS (8441) | Module : CL | File : cl_nwrl.c +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This file implements common library functions related to the | network release(in this case, SGSN release) for all entities of | the GPRS protocol stack +----------------------------------------------------------------------------- */ #ifndef CL_NWRL_C #define CL_NWRL_C #endif /*==== INCLUDES =============================================================*/ #include "typedefs.h" /* to get Condat data types */ #include "vsi.h" #include "p_cl.val" /* to get the type of sgsn_rel*/ #include "p_8010_152_ps_include.h" /*to get T_PS_qos_rXX*/ #include "cl_inline.h" LOCAL U8 sgsn_release; /* +------------------------------------------------------------------------------ | Function : cl_nwrl_set_sgsn_release() +------------------------------------------------------------------------------ | Description : The function cl_nwrl_set_sgsn_release() sets the status of SGSN | release as received in SI13, PSI1 and PSI13 messages. This is | called by GRR during initialization after Power On, when | processing SI13, PSI1 and PSI13 | | Parameters : U8 sgsn_rel | +------------------------------------------------------------------------------ */ GLOBAL void cl_nwrl_set_sgsn_release(U8 sgsn_rel) { TRACE_FUNCTION( "cl_nwrl_set_sgsn_release()" ); sgsn_release = sgsn_rel; } /* +------------------------------------------------------------------------------ | Function : cl_nwrl_get_sgsn_release() +------------------------------------------------------------------------------ | Description : The function cl_nwrl_get_sgsn_release() gets the status of SGSN | release. This is called up by entities such as GMM, SM that need | the SGSN release. It is advised to call this function only after | a cell re-selection as the SGSN release value is invalid during | cell re-selection. | | Parameters : Nil | +------------------------------------------------------------------------------ */ GLOBAL U8 cl_nwrl_get_sgsn_release() { TRACE_FUNCTION( "cl_nwrl_get_sgsn_release()" ); return sgsn_release; }