view src/g23m-gprs/gmm/gmm_rxf.c @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 219afcfc6250
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GPRS (8441)
|  Modul   :  gmm_rxf.c
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This modul is part of the entity GMM and implements all 
|             procedures and functions as described in the 
|             SDL-documentation (RX-statemachine)
+----------------------------------------------------------------------------- 
*/ 


#ifndef GMM_RXF_C
#define GMM_RXF_C
#endif

#define ENTITY_GMM

/*==== INCLUDES =============================================================*/

#include "typedefs.h"    /* to get Condat data types */
#include "vsi.h"        /* to get a lot of macros */
#include "macdef.h"
#include "gprs.h"
#include "gsm.h"        /* to get a lot of macros */
#include "ccdapi.h"     /* to get CCD API */
#include "cnf_gmm.h"    /* to get cnf-definitions */
#include "mon_gmm.h"    /* to get mon-definitions */
#include "prim.h"       /* to get the definitions of used SAP and directions */
#include "gmm.h"        /* to get the global entity definitions */
#include "gmm_txs.h"    /* to get some signals */

/*==== CONST ================================================================*/

/*==== LOCAL VARS ===========================================================*/

/*==== PRIVATE FUNCTIONS ====================================================*/

/*==== PUBLIC FUNCTIONS =====================================================*/



/*
+------------------------------------------------------------------------------
| Function    : rxgmm_init
+------------------------------------------------------------------------------
| Description : The function rxgmm_init() .... 
|
| Parameters  : void
|
+------------------------------------------------------------------------------
*/
GLOBAL void rxgmm_init ( void )
{ 
  TRACE_FUNCTION( "rxgmm_init" );

  /*
   * Initialise service RX with state RX_READY.
   */
  INIT_STATE ( RX, RX_READY );
  
} /* rxgmm_init() */

/*
+------------------------------------------------------------------------------
| Function    : rx_gmm_status
+------------------------------------------------------------------------------
| Description : The function kern_gmm_status() .... 
|
| Parameters  : cause - error cause
|
+------------------------------------------------------------------------------
*/
GLOBAL void rx_gmm_status ( UBYTE cause )
{ 
  GMM_TRACE_FUNCTION( "rx_gmm_status" );
  {
    MCAST (gmm_status, GMM_STATUS);
     gmm_status->gmm_cause.cause_value = cause;
     vsi_o_ttrace(VSI_CALLER TC_EVENT,"Info: cause: %i", cause);
    
    sig_rx_tx_data_req (CURRENT_TLLI, GMM_STATUS);
  }
  GMM_RETURN;
} /* rx_gmm_status() */