view src/g23m-gprs/grlc/cnf_grlc.h @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 219afcfc6250
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GPRS (8441)
|  Modul   :  GRLC
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Dynamic Configuration for GPRS Radio Resource Management (GRLC).
+----------------------------------------------------------------------------- 
*/ 

#ifndef CNF_GRLC_H
#define CNF_GRLC_H


/*==== CONST ================================================================*/
/*
 * CONFIGURATION PARAMETER
 *
 * Description :  The constants define the commands for dynamic
 *                configuration proposals.
 */
#define GRLC_STR_TPC_PWR_PAR "GRLC_TPC_PWR_PAR"
#define GRLC_STR_TPC_FIX_PCL "GRLC_TPC_FIX_PCL"
#define GRLC_STR_TPC_TRACE   "GRLC_TPC_TRACE"
#define GRLC_STR_IM_TRACE    "GRLC_IM_TRACE"
#define GRLC_STR_CCD_USAGE   "GRLC_CCD_USAGE"

#define GRLC_NUM_TPC_PWR_PAR 0
#define GRLC_NUM_TPC_FIX_PCL 1
#define GRLC_NUM_TPC_TRACE   2
#define GRLC_NUM_IM_TRACE    3
#define GRLC_NUM_CCD_USAGE   4
#endif /* !CNF_GRLC_H */