view src/g23m-gprs/grr/cnf_grr.h @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 219afcfc6250
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GPRS (8441)
|  Modul   :  GRR
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Dynamic Configuration for GPRS Radio Resource Management (GRR).
+----------------------------------------------------------------------------- 
*/ 

#ifndef CNF_GRR_H
#define CNF_GRR_H


/*==== CONST ================================================================*/
/*
 * CONFIGURATION PARAMETER
 *
 * Description :  The constants define the commands for dynamic
 *                configuration proposals.
 */
#define GRR_STR_IM_INIT     "GRR_IM_INIT"
#define GRR_STR_TBF_CCCH    "GRR_TBF_CCCH"
#define GRR_STR_NO_TBF_CCCH "GRR_NO_TBF_CCCH"
#define GRR_STR_CRP_TRACE   "GRR_CRP_TRACE"
#define GRR_STR_IM_TRACE    "GRR_IM_TRACE"
#define GRR_STR_RES_RANDOM  "GRR_RES_RANDOM"
#define GRR_STR_STD         "STD"
#define GRR_STR_NC2         "NC2_ACTIVE"


#define GRR_NUM_IM_INIT     0
#define GRR_NUM_TBF_CCCH    1
#define GRR_NUM_NO_TBF_CCCH 2
#define GRR_NUM_CRP_TRACE   3
#define GRR_NUM_IM_TRACE    4
#define GRR_NUM_RES_RANDOM  5
#define GRR_NUM_STD         6
#define GRR_NUM_NC2         7

#endif /* !CNF_GRR_H */