view src/g23m-gprs/llc/llc_rxf.h @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 219afcfc6250
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  
|  Modul   :  
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definitions for llc_rxf.c 
+----------------------------------------------------------------------------- 
*/ 


#ifndef LLC_RXF_H
#define LLC_RXF_H


/*
 * Values for frame_rej parameter of rx_interpret_frame().
 */
#define FRAME_NOT_REJ         0x00
#define FRAME_REJ_W1          0x01
#define FRAME_REJ_W3          0x04


EXTERN void rx_init (void);

EXTERN void rx_analyse_ctrl_field (T_GRLC_UNITDATA_IND *grlc_unitdata_ind,
                                   T_PDU_TYPE *frame_type,
                                   UBYTE  *protected_mode,
                                   UBYTE  *sapi,
                                   T_FRAME_NUM *ns,
                                   BOOL   *ciphering,
                                   USHORT *header_size,
                                   BOOL   *frame_ok);

EXTERN void rx_send_decipher_req (T_GRLC_UNITDATA_IND *grlc_unitdata_ind,
                                  T_PDU_TYPE frame_type,
                                  UBYTE protected_mode,
                                  T_FRAME_NUM ns,
                                  USHORT header_size,
                                  BOOL ciphering);

EXTERN void rx_interpret_frame (T_sdu *frame,
                                UBYTE *sapi, 
                                T_PDU_TYPE *pdu_type, 
                                T_COMMAND *command, 
                                T_BIT *cr_bit, 
                                T_BIT *pf_bit, 
                                T_FRAME_NUM *nr, 
                                T_FRAME_NUM *ns, 
                                BOOL *frame_ok, 
                                UBYTE *frame_rej,
                                USHORT *frame_rej_ctrl_length,
                                UBYTE  cipher);

EXTERN void rx_strip_llc_header (T_sdu *sdu, 
                                 T_PDU_TYPE pdu_type,
                                 T_COMMAND command);


#endif /* !LLC_RXS_H */