view src/g23m-gprs/llc/llc_t200p.c @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000 (2020-01-04)
parents 219afcfc6250
children
line wrap: on
line source
/* 
+----------------------------------------------------------------------------- 
|  Project :  
|  Modul   :  
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This modul is part of the entity LLC and implements all 
|             functions to handles the incoming primitives as described in 
|             the SDL-documentation (T200-statemachine)
+----------------------------------------------------------------------------- 
*/ 

#ifndef LLC_T200P_C
#define LLC_T200P_C
#endif

#define ENTITY_LLC

/*==== INCLUDES =============================================================*/

#include "typedefs.h"   /* to get Condat data types */
#include "vsi.h"        /* to get a lot of macros */
#include "macdef.h"
#include "gprs.h"
#include "gsm.h"        /* to get a lot of macros */
#include "cnf_llc.h"    /* to get cnf-definitions */
#include "mon_llc.h"    /* to get mon-definitions */
#include "prim.h"       /* to get the definitions of used SAP and directions */
#include "llc.h"        /* to get the global entity definitions */

#include "llc_t200f.h"  /* to get local T200 functions */
#include "llc_us.h"     /* to get signal interface to U */
#include "llc_f.h"     /* to get llc functions */

/*==== CONST ================================================================*/

/*==== LOCAL VARS ===========================================================*/

/*==== PRIVATE FUNCTIONS ====================================================*/

/*==== PUBLIC FUNCTIONS =====================================================*/



/*
+------------------------------------------------------------------------------
| Function    : t200_timer_t200
+------------------------------------------------------------------------------
| Description : Handles expiry of timer T200. This function is called from
|               pei_primitive().
|
| Parameters  : sapi - indicates the SAPI for which the timer has expired
|
+------------------------------------------------------------------------------
*/
GLOBAL void t200_timer_t200 (UBYTE sapi)
{
#ifndef LL_DESC 
  T_LL_UNITDATA_REQ *frame;
#else
  T_LL_UNITDESC_REQ *frame;
#endif
  UBYTE             cause;
  T_SERVICE         originator;

  TRACE_FUNCTION( "t200_timer_t200" );

  /*
   * Switch all service incarnations of LLC according to sapi.
   */
  SWITCH_LLC (sapi);
  
  switch (GET_STATE(T200))
  {
    case T200_RUNNING:
      SET_STATE (T200, T200_RESET);

      /*
       * No frame with P bit set to 1 is currently outstanding
       */
      llc_data->sapi->pbit_outstanding = FALSE;

      /*
       * Get associated timer data (frame, cause, originating service)
       * and send T200 expired signal, if originator is set. Otherwise
       * just PFREE the frame.
       */
      t200_get_timer_data (&frame, &cause, &originator);
      if (originator EQ SERVICE_U)
      {
        TRACE_0_INFO("T200 expired");
        sig_t200_u_expired_ind (frame, cause, EXPIRY_TIMED);
      }
      else
      {
        TRACE_0_INFO("T200 expired, no service associated, frame discarded");
#ifdef LL_DESC
        /*
         * The descriptor contents of the primitive structure
         * must be freed as well.
         */
        llc_cl_desc3_free((T_desc3*)llc_data->t200->frame->desc_list3.first);
#endif /* LL_DESC */
        PFREE (frame);
      }
      break;

    default:
      t200_get_timer_data (&frame, &cause, &originator);
      if (frame != NULL)
      {
#ifdef LL_DESC
        /*
         * The descriptor contents of the primitive structure
         * must be freed as well.
         */
        llc_cl_desc3_free((T_desc3*)llc_data->t200->frame->desc_list3.first);
#endif /* LL_DESC */
        PFREE (frame);
      }
      TRACE_ERROR( "T200 unexpected" );
      break;
  }

} /* t200_timer_t200() */