FreeCalypso > hg > fc-magnetite
view src/g23m-gprs/sndcp/sndcp_pdas.c @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | 219afcfc6250 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GPRS (8441) | Modul : sndcp_pdas.c +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This modul is part of the entity SNDCP and implements all | functions to handles the incoming process internal signals as | described in the SDL-documentation (PDA-statemachine) +----------------------------------------------------------------------------- */ #define ENTITY_SNDCP /*==== INCLUDES =============================================================*/ #include "typedefs.h" /* to get Condat data types */ #include "vsi.h" /* to get a lot of macros */ #include "macdef.h" #include "gsm.h" /* to get a lot of macros */ #include "prim.h" /* to get the definitions of used SAP and directions */ #include "dti.h" #include "sndcp.h" /* to get the global entity definitions */ #include "sndcp_f.h" /* to get the functions to access the global arrays*/ /*==== CONST ================================================================*/ /*==== LOCAL VARS ===========================================================*/ /*==== PRIVATE FUNCTIONS ====================================================*/ /*==== PUBLIC FUNCTIONS =====================================================*/ /* +------------------------------------------------------------------------------ | Function : sig_sda_pda_getdata_req +------------------------------------------------------------------------------ | Description : Handles the internal signal SIG_SDA_PDA_GETDATA_REQ | | Parameters : the affected sapi. | +------------------------------------------------------------------------------ */ GLOBAL void sig_sda_pda_getdata_req (UBYTE sapi) { UBYTE sapi_index = 0; TRACE_ISIG( "sig_sda_pda_getdata_req" ); /* * set service instance according to sapi in primitive */ sndcp_get_sapi_index(sapi, &sapi_index); sndcp_data->pda = & sndcp_data->pda_base[sapi_index]; switch( GET_STATE( PDA ) ) { case PDA_DEFAULT: #ifdef SNDCP_TRACE_ALL TRACE_EVENT("trying to palloc/send LL_GETDATA_REQ"); #endif { PALLOC(ll_getdata_req, LL_GETDATA_REQ); ll_getdata_req->sapi = sapi; /* * TLLI is not evaluated by LLC. */ PSEND(hCommLLC, ll_getdata_req); } break; default: TRACE_ERROR( "SIG_SDA_PDA_GETDATA_REQ unexpected" ); break; } } /* sig_sda_pda_getdata_req() */