view src/g23m-gprs/sndcp/sndcp_pds.c @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 219afcfc6250
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GPRS (8441)
|  Modul   :  sndcp_pds.c
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This modul is part of the entity SNDCP and implements all 
|             functions to handles the incoming process internal signals as  
|             described in the SDL-documentation (PD-statemachine)
+----------------------------------------------------------------------------- 
*/ 


#define ENTITY_SNDCP

/*==== INCLUDES =============================================================*/

#include "typedefs.h"    /* to get Condat data types */
#include "vsi.h"        /* to get a lot of macros */
#include "macdef.h"
#include "gsm.h"        /* to get a lot of macros */
#include "prim.h"       /* to get the definitions of used SAP and directions */

#include "dti.h"

#include "sndcp.h"        /* to get the global entity definitions */
#include "sndcp_f.h"       /* to get the functions to access the global arrays*/

/*==== CONST ================================================================*/

/*==== LOCAL VARS ===========================================================*/

/*==== PRIVATE FUNCTIONS ====================================================*/

/*==== PUBLIC FUNCTIONS =====================================================*/



/*
+------------------------------------------------------------------------------
| Function    : sig_sd_pd_getunitdata_req
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_SD_PD_GETUNITDATA_REQ
|
| Parameters  : the affected sapi.
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_sd_pd_getunitdata_req (UBYTE sapi) 
{ 
  UBYTE sapi_index = 0;

  TRACE_ISIG( "sig_sd_pd_getunitdata_req" );

   /*
    * set service instance according to sapi in primitive
    */
  sndcp_get_sapi_index(sapi, &sapi_index);
  sndcp_data->pd = & sndcp_data->pd_base[sapi_index];
 
  switch( GET_STATE( PD ) )
  {
    case PD_DEFAULT:
      {
        PALLOC(ll_getunitdata_req, LL_GETUNITDATA_REQ);

        ll_getunitdata_req->sapi = sapi;
        /*
         * TLLI is not evaluated by LLC.
         */
#ifdef FLOW_TRACE
        sndcp_trace_flow_control(FLOW_TRACE_SNDCP, 
                                 FLOW_TRACE_DOWN, 
                                 FLOW_TRACE_BOTTOM, 
                                 TRUE);
#endif
        PSEND(hCommLLC, ll_getunitdata_req);
      }
      break;
    default:
      TRACE_ERROR( "SIG_SD_PD_GETUNITDATA_REQ unexpected" );
      break;
  }
} /* sig_sd_pd_getunitdata_req() */