FreeCalypso > hg > fc-magnetite

view src/g23m-gprs/sndcp/sndcp_sdaf.h @ 632:d968a3216ba0

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 219afcfc6250
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GPRS (8441)
|  Modul   :  sndcp_sdaf.h
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved.  
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definitions for sndcp_sdaf.c 
+----------------------------------------------------------------------------- 
*/ 

/*---- HISTORY --------------------------------------------------------------*/
#if 0

  $Log:: /GPRS/Condat/MS/SRC/SNDCP/sndcp_sdaf.h                            $
 * 
 * 8     15.05.00 16:55 Hk
 * T H E   E N D.
 * 
 * 7     15.05.00 16:16 Hk
 * backup.
 * 
 * 6     9.05.00 18:59 Hk
 * XID negotiation work in progress. Backup.
 * 
 * 5     18.04.00 18:47 Hk
 * Backup. Work on XID negotiation.
 * 
 * 4     30.03.00 16:04 Hk
 * 
 * 3     17.03.00 18:03 Hk
 * Acknowledged data transfer is now implemented and tested uplink and
 * downlink.
 * 
 * 2     10.03.00 17:49 Hk
 * Backup. First downlink ack data transfer ok (case 700).
 * 
 * 1     10.03.00 11:43 Hk
 * Initial.
 * 
 

#endif

#ifndef SNDCP_SDAF_H
#define SNDCP_SDAF_H

/*
 * Convenience functions, not in SDL
 */
EXTERN BOOL sda_f_bit (T_LL_DATA_IND* ll_data_ind);
EXTERN UBYTE sda_get_pcomp (T_LL_DATA_IND* ll_data_ind);
EXTERN BOOL sda_m_bit (T_LL_DATA_IND* ll_data_ind);

EXTERN void sda_is_seg_valid(T_LL_DATA_IND* ll_data_ind,
                         BOOL* valid);
EXTERN void sda_is_nsapi_rec (UBYTE nsapi, BOOL* b);

EXTERN void sda_set_nsapi_rec(UBYTE nsapi, BOOL b);

EXTERN void sda_ac_f_f0 (T_LL_DATA_IND* ll_data_ind);

EXTERN void sda_ac_f_f1_m0 (T_LL_DATA_IND* ll_data_ind);

EXTERN void sda_ac_f_f1_m1 (T_LL_DATA_IND* ll_data_ind);

EXTERN void sda_ac_s_f0_m0 (T_LL_DATA_IND* ll_data_ind);

EXTERN void sda_ac_s_f0_m1 (T_LL_DATA_IND* ll_data_ind);

EXTERN void sda_ac_s_f1_m0 (T_LL_DATA_IND* ll_data_ind);

EXTERN void sda_ac_s_f1_m1 (T_LL_DATA_IND* ll_data_ind);

EXTERN void sda_delete_cur_sn_data_ind (U8 nsapi);

EXTERN void sda_get_data_if_nec (UBYTE sapi);

EXTERN void sda_init (void);

EXTERN void sda_get_nsapi(T_LL_DATA_IND* ll_data_ind, UBYTE* nsapi);

#endif /* !SNDCP_SDF_H */