FreeCalypso > hg > fc-magnetite

view src/g23m-gprs/sndcp/sndcp_sdap.h @ 632:d968a3216ba0

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 219afcfc6250
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GPRS (8441)
|  Modul   :  sndcp_sdap.h
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definitions for sndcp_sdap.c 
+----------------------------------------------------------------------------- 
*/ 

/*---- HISTORY --------------------------------------------------------------*/
#if 0

  $Log:: /GPRS/Condat/MS/SRC/SNDCP/sndcp_sdap.h                            $
 * 
 * 8     15.05.00 16:55 Hk
 * T H E   E N D.
 * 
 * 7     15.05.00 16:16 Hk
 * backup.
 * 
 * 6     9.05.00 18:59 Hk
 * XID negotiation work in progress. Backup.
 * 
 * 5     18.04.00 18:47 Hk
 * Backup. Work on XID negotiation.
 * 
 * 4     30.03.00 16:04 Hk
 * 
 * 3     17.03.00 18:03 Hk
 * Acknowledged data transfer is now implemented and tested uplink and
 * downlink.
 * 
 * 2     10.03.00 17:49 Hk
 * Backup. First downlink ack data transfer ok (case 700).
 * 
 * 1     10.03.00 11:43 Hk
 * Initial.
 * 
 * 9     7.03.00 18:24 Hk
 * Backup. Last check in before adding extra downlink service for timeout and
 * re-ordering. 
 * 
 * 8     25.02.00 18:27 Hk
 * Backup, test case 346 runs (deactivation of ack context including ll
 * release.
 * 
 * 7     17.02.00 14:32 Hk
 * Last checkin before maybe splitting sd in two services for 1.unack and 2.
 * ack op mode.
 * 
 * 6     11.02.00 18:49 Hk
 * Establishment of LLC acknowledged operation mode. First test case SNDCP035
 * successful. Backup.
 * 
 * 5     9.02.00 15:03 Hk
 * Backup. Unacknowledged data transfer possible. Up to testcase SNDCP034.
 * 
 * 4     7.02.00 18:02 Hk
 * Backup, error situations in service sd, up to testcase 028.
 * 
 * 3     3.02.00 18:08 Hk
 * Backup, downlink transfer up to test case 016.
 * 
 * 2     26.01.00 16:24 Hk
 * Made services sd and nd compilable.
 * 
 * 1     25.01.00 17:32 Hk
 * Initial.

#endif

#ifndef SNDCP_SDAP_H
#define SNDCP_SDAP_H




#endif /* !SNDCP_SDP_H */