view src/g23m-gprs/sndcp/sndcp_suf.c @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 219afcfc6250
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GPRS (8441)
|  Modul   :  sndcp_suf.c
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This modul is part of the entity SNDCP and implements all 
|             procedures and functions as described in the 
|             SDL-documentation (SU-statemachine)
+----------------------------------------------------------------------------- 
*/ 

/*---- HISTORY --------------------------------------------------------------*/

#define ENTITY_SNDCP

/*==== INCLUDES =============================================================*/

#include "typedefs.h"    /* to get Condat data types */
#include "vsi.h"        /* to get a lot of macros */
#include "macdef.h"
#include "prim.h"       /* to get the definitions of used SAP and directions */

#include "dti.h"

#include "sndcp.h"        /* to get the global entity definitions */
#include "sndcp_f.h"       /* to get the functions to access the global arrays*/

#include "sndcp_nus.h"   /* to get signals to service nu */
#include "sndcp_cias.h"   /* to get signals to service cia */

/*==== CONST ================================================================*/

/*==== LOCAL VARS ===========================================================*/

/*==== PRIVATE FUNCTIONS ====================================================*/

/*==== PUBLIC FUNCTIONS =====================================================*/
#ifdef _SNDCP_DTI_2_

/*
+------------------------------------------------------------------------------
| Function    : su_get_nsapi
+------------------------------------------------------------------------------
| Description : finde the affected nsapi in sn-PDU.
|
| Parameters  : ll_unitdata_req*
| Returns     : the nsapi
|
+------------------------------------------------------------------------------
*/
GLOBAL U8 su_get_nsapi (T_LL_UNITDESC_REQ* ll_unitdesc_req) 
{ 
   T_desc3* desc3 = NULL;
   U8 * sndcp_header = NULL;

  /* Get the descriptor describing the memory area with the sndcp header */

  desc3 = (T_desc3*)ll_unitdesc_req->desc_list3.first;
  sndcp_header = (U8*)desc3->buffer;

  TRACE_FUNCTION( "su_get_nsapi" );

  return (*(sndcp_header + ENCODE_OFFSET_BYTE)) & 0xf;
} /* sua_get_nsapi() */

#else /* _SNDCP_DTI_2_ */

/*
+------------------------------------------------------------------------------
| Function    : su_get_nsapi
+------------------------------------------------------------------------------
| Description : finde the affected nsapi in sn-PDU.
|
| Parameters  : ll_unitdata_req*
| Returns     : the nsapi
|
+------------------------------------------------------------------------------
*/
GLOBAL UBYTE su_get_nsapi (T_LL_UNITDATA_REQ* ll_unitdata_req) 
{ 
  USHORT octet_offset = (ll_unitdata_req->sdu.o_buf) >> 3;

  TRACE_FUNCTION( "su_get_nsapi" );

  return ll_unitdata_req->sdu.buf[octet_offset] & 0xf;

} /* su_get_nsapi() */

#endif /* _SNDCP_DTI_2_ */

/*
+------------------------------------------------------------------------------
| Function    : su_init
+------------------------------------------------------------------------------
| Description : The function su_init() .... 
|
| Parameters  : 
|
+------------------------------------------------------------------------------
*/
GLOBAL void su_init (void)
{ 
  TRACE_FUNCTION( "su_init" );

  /*
   * Not initialized:
   * Members of sn_unitdata_q are not set to NULL.
   * Members of npdu_number_q are not set to 0.
   * Members of ll_unitdata_q are not set to NULL.
   */

  sndcp_data->su = & sndcp_data->su_base[0];
  INIT_STATE(SU_0, SU_LLC_NOT_RECEPTIVE);
#ifdef SNDCP_2to1
  sndcp_data->su->sapi = PS_SAPI_3; 
#else
  sndcp_data->su->sapi = LL_SAPI_3; 
#endif /*SNDCP_2to1*/

  sndcp_data->su = & sndcp_data->su_base[1];
  INIT_STATE(SU_1, SU_LLC_NOT_RECEPTIVE);
#ifdef SNDCP_2to1
  sndcp_data->su->sapi = PS_SAPI_5; 
#else
  sndcp_data->su->sapi = LL_SAPI_5; 
#endif /*SNDCP_2to1*/

  sndcp_data->su = & sndcp_data->su_base[2];
  INIT_STATE(SU_2, SU_LLC_NOT_RECEPTIVE);
#ifdef SNDCP_2to1
  sndcp_data->su->sapi = PS_SAPI_9; 
#else
  sndcp_data->su->sapi = LL_SAPI_9; 
#endif /*SNDCP_2to1*/

  sndcp_data->su = & sndcp_data->su_base[3];
  INIT_STATE(SU_3, SU_LLC_NOT_RECEPTIVE);
#ifdef SNDCP_2to1
  sndcp_data->su->sapi = PS_SAPI_11; 
#else
  sndcp_data->su->sapi = LL_SAPI_11; 
#endif /*SNDCP_2to1*/
  {
    UBYTE sapi_index = 0;

    for (sapi_index = 0; sapi_index < SNDCP_NUMBER_OF_SAPIS; sapi_index++) {
      sndcp_data->su = & sndcp_data->su_base[sapi_index];
      sndcp_data->su->n201_u = N201_U_DEFAULT;
      sndcp_data->su->sn_unitdata_q_read = 0;
      sndcp_data->su->sn_unitdata_q_write = 0;
#ifdef _SNDCP_DTI_2_
      sndcp_data->su->ll_unitdesc_q_read = 0;
      sndcp_data->su->ll_unitdesc_q_write = 0;
#else /* _SNDCP_DTI_2_ */
      sndcp_data->su->ll_unitdata_q_read = 0;
      sndcp_data->su->ll_unitdata_q_write = 0;
#endif /* _SNDCP_DTI_2_ */
      sndcp_data->su->cia_state = CIA_IDLE;
    }
  }

  

} /* su_init() */


/*
+------------------------------------------------------------------------------
| Function    : su_next_sn_unitdata_req
+------------------------------------------------------------------------------
| Description : If queue with sn_unitdata_req is
| not empty, send SIG_SU_CIA_DATA_REQ with next prim from sn_unitdata_req queue
|
| Parameters  : sapi
| Pre         : cia_state == CIA_IDLE
|
+------------------------------------------------------------------------------
*/
GLOBAL void su_next_sn_unitdata_req (UBYTE sapi) 
{ 
  TRACE_FUNCTION( "su_next_sn_unitdata_req" );

  if (sndcp_data->su->sn_unitdata_q_write !=
      sndcp_data->su->sn_unitdata_q_read) {
    /*
     * Get sn_unitdata_req from queue.
     */
    T_SN_UNITDATA_REQ* sn_unitdata_req = 
      sndcp_data->su->sn_unitdata_q[sndcp_data->su->sn_unitdata_q_read];
    /*
     * Get npdu_number from queue.
     */
    USHORT npdu_num = 
      sndcp_data->su->npdu_number_q[sndcp_data->su->sn_unitdata_q_read];
    UBYTE nsapi = sn_unitdata_req->nsapi;

    sndcp_data->su->sn_unitdata_q[sndcp_data->su->sn_unitdata_q_read] = NULL;
    sndcp_data->su->sn_unitdata_q_read = 
      (sndcp_data->su->sn_unitdata_q_read + 1 ) % SN_UNITDATA_Q_LEN;

    /*
     * Cia is now busy. Send data.
     */
    sndcp_data->su->cia_state = CIA_BUSY;
    sig_su_cia_cia_comp_req(sn_unitdata_req,
                        npdu_num,
                        nsapi,
                        sapi);
  }  else if (sndcp_data->su->cia_state == CIA_IDLE) {
    UBYTE nsapi = 0;

    for (nsapi = 0; nsapi < SNDCP_NUMBER_OF_NSAPIS; nsapi++) {
      UBYTE used_sapi = 0;
      BOOL used = FALSE;

      sndcp_is_nsapi_used(nsapi, &used);
      if (used) {
        sndcp_get_nsapi_sapi(nsapi, &used_sapi);
        if (used_sapi == sapi) {
          sig_su_nu_ready_ind(nsapi);
        }
      }
    }
  }


} /* su_next_sn_unitdata_req() */