view src/g23m-gprs/upm/upm_mm_output_handler.c @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 2cf312e56ee7
children
line wrap: on
line source

/*----------------------------------------------------------------------------
|  Project :  3G PS
|  Module  :  UPM
+-----------------------------------------------------------------------------
|             Copyright 2003 Texas Instruments.
|             All rights reserved. 
| 
|             This file is confidential and a trade secret of Texas 
|             Instruments .
|             The receipt of or possession of this file does not convey 
|             any rights to reproduce or disclose its contents or to 
|             manufacture, use, or sell anything it may describe, in 
|             whole, or in part, without the specific written consent of 
|             Texas Instruments. 
+-----------------------------------------------------------------------------
| Purpose:    Output functions for primitives from UPM to the MM entity.
|             For design details, see:
|             8010.939 UPM Detailed Specification
+---------------------------------------------------------------------------*/

/*==== DECLARATION CONTROL =================================================*/

/*==== INCLUDES ============================================================*/

#include "upm.h"

#include "upm_mm_output_handler.h"

/*==== CONSTS ===============================================================*/

/*==== TYPES ================================================================*/

/*==== LOCALS ===============================================================*/

/*==== PUBLIC FUNCTIONS =====================================================*/

/*
+------------------------------------------------------------------------------
| Function    : send_mmpm_reestablish_req
+------------------------------------------------------------------------------
| Description : Allocate, pack and send MMPM_REESTABLISH_RES primitive.
|
| Parameters  : None
+------------------------------------------------------------------------------
*/
#ifdef TI_UMTS
void send_mmpm_reestablish_req(U8 most_demanding)
{
  U8  establish_cause;
  (void)TRACE_FUNCTION("send_mmpm_reestablish_req");

  switch ((T_PS_tc)most_demanding) {
  case PS_TC_CONV:
    establish_cause = (U8)MMPM_CAUSE_ESTABL_ORIG_CONVERSATIONAL;
    break;
  case PS_TC_STREAM:
    establish_cause = (U8)MMPM_CAUSE_ESTABL_ORIG_STREAMING;
    break;
  case PS_TC_INTER:
    establish_cause = (U8)MMPM_CAUSE_ESTABL_ORIG_INTERACTIVE;
    break;
  case PS_TC_BG:
    establish_cause = (U8)MMPM_CAUSE_ESTABL_ORIG_BACKGROUND;
    break;
  case PS_TC_SUB:
    establish_cause = (U8)MMPM_CAUSE_ESTABL_ORIG_BACKGROUND;
    break;
  }

  {
    PALLOC(prim, MMPM_REESTABLISH_REQ);

    prim->establish_cause = establish_cause;

    (void)PSEND(hCommMM, prim);
  }
}
#endif /* TI_UMTS */

/*
+------------------------------------------------------------------------------
| Function    : send_mmpm_sequence_res
+------------------------------------------------------------------------------
| Description : Allocate, pack and send MMPM_SEQUENCE_RES primitive.
|
| Parameters  : sn_sequence_cnf   - SN_SEQUENCE_CNF primitive
+------------------------------------------------------------------------------
*/
#ifdef TI_GPRS
void send_mmpm_sequence_res(T_SN_SEQUENCE_CNF *sn_sequence_cnf)
{
  U16  index;
  (void)TRACE_FUNCTION("send_mmpm_sequence_res");
  {
    PALLOC(prim, MMPM_SEQUENCE_RES);

  /*lint -e613 (Possible use of null pointer 'prim' in left argument to operator '->') */
    prim->c_npdu_list = sn_sequence_cnf->c_receive_no_list;

    memcpy(&prim->npdu_list, sn_sequence_cnf->receive_no_list,
	   (size_t)sn_sequence_cnf->c_receive_no_list * sizeof(T_MMPM_npdu_list));
    for (index = 0; index < (U16)sn_sequence_cnf->c_receive_no_list; index++)
    {
      prim->npdu_list[index].nsapi                    = sn_sequence_cnf->receive_no_list[index].nsapi;
      prim->npdu_list[index].receive_n_pdu_number_val = sn_sequence_cnf->receive_no_list[index].receive_no;
    }
  /*lint +e613 (Possible use of null pointer 'prim' in left argument to operator '->') */
   (void)PSEND(hCommMM, prim);
  }
}
#endif /* TI_GPRS */
/*==== END OF FILE ==========================================================*/