FreeCalypso > hg > fc-magnetite

view src/g23m-gsm/l1/l1.h @ 632:d968a3216ba0

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 27a4235405c6
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  
|  Modul   :  
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definitions for the Protocol Stack Entity l1.
+----------------------------------------------------------------------------- 
*/ 

#ifndef L1_H
#define L1_H

#ifdef TI_PS_HCOMM_CHANGE
#include "cl_hComm_handle.h"

#ifdef NEW_FRAME


  #define hCommGRR              l1_hCommGRR
  #define hCommLLC              l1_hCommLLC
  #define hCommSNDCP            l1_hCommSNDCP
  #define hCommGMM              l1_hCommGMM
  #define hCommTOM              l1_hCommTOM

  #define L1_Handle             l1_L1_Handle
   
/*jk: delete warnings  #define VSI_CALLER L1_Handle, */

  #ifdef L1_PEI_C

    /* Communication handles */

  #ifdef GPRS
    T_HANDLE                 hCommGRR = VSI_ERROR;
    T_HANDLE                 hCommLLC = VSI_ERROR;
    T_HANDLE                 hCommSNDCP = VSI_ERROR;
    T_HANDLE                 hCommGMM = VSI_ERROR;
    T_HANDLE                 hCommTOM = VSI_ERROR;
  #endif	
    T_HANDLE                 L1_Handle;

  #else /* L1_PEI_C */

    extern T_HANDLE          hCommGRR;
    extern T_HANDLE          hCommLLC;
    extern T_HANDLE          hCommSNDCP;
    extern T_HANDLE          hCommGMM;
    extern T_HANDLE          hCommTOM;
    extern T_HANDLE          L1_Handle;

  #endif /* L1_PEI_C */

#else /* NEW_FRAME */

  #define PL_NAME    "PL"
  #define L1_NAME    "L1"
 
  #define VSI_CALLER L1_NAME,

#endif /* NEW_FRAME */
#else
#ifdef NEW_FRAME

  #define hCommPL               l1_hCommPL
  #define hCommL1               l1_hCommL1
  #define hCommGRR              l1_hCommGRR
  #define hCommLLC              l1_hCommLLC
  #define hCommSNDCP            l1_hCommSNDCP
  #define hCommGMM              l1_hCommGMM
  #define hCommTOM              l1_hCommTOM
  #define hCommACI              l1_hCommACI
  #define L1_Handle             l1_L1_Handle
   
/*jk: delete warnings  #define VSI_CALLER L1_Handle, */

  #ifdef L1_PEI_C

    /* Communication handles */
    T_HANDLE                 hCommPL = VSI_ERROR;
    T_HANDLE                 hCommACI = VSI_ERROR;
    T_HANDLE                 hCommL1 = VSI_ERROR;
  #ifdef GPRS
    T_HANDLE                 hCommGRR = VSI_ERROR;
    T_HANDLE                 hCommLLC = VSI_ERROR;
    T_HANDLE                 hCommSNDCP = VSI_ERROR;
    T_HANDLE                 hCommGMM = VSI_ERROR;
    T_HANDLE                 hCommTOM = VSI_ERROR;
  #endif	
    T_HANDLE                 L1_Handle;

  #else /* L1_PEI_C */

    extern T_HANDLE          hCommPL;
    extern T_HANDLE          hCommACI;
    extern T_HANDLE          hCommL1;
    extern T_HANDLE          hCommGRR;
    extern T_HANDLE          hCommLLC;
    extern T_HANDLE          hCommSNDCP;
    extern T_HANDLE          hCommGMM;
    extern T_HANDLE          hCommTOM;
    extern T_HANDLE          L1_Handle;

  #endif /* L1_PEI_C */

#else /* NEW_FRAME */

  #define PL_NAME    "PL"
  #define L1_NAME    "L1"
 
  #define VSI_CALLER L1_NAME,

  #ifdef L1_PEI_C
  
    T_VSI_CHANDLE            hCommPL = VSI_ERROR;
    T_VSI_CHANDLE            hCommL1 = VSI_ERROR;

  #else /* L1_PEI_C */

    extern T_VSI_CHANDLE     hCommPL;
    extern T_VSI_CHANDLE     hCommL1;

  #endif /* L1_PEI_C */

#endif /* NEW_FRAME */
#endif /* TI_PS_HCOMM_CHANGE */
#endif /* L1_H */