FreeCalypso > hg > fc-magnetite

view src/g23m-gsm/mm/cnf_mm.h @ 632:d968a3216ba0

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 27a4235405c6
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (8410)
|  Modul   :  CNF_MM
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Dynamic Configuration for Mobility Management
+----------------------------------------------------------------------------- 
*/ 

#ifndef CNF_MM_H
#define CNF_MM_H

/*==== CONSTANTS ==================================================*/
/*
 * CONFIGURATION PARAMETER
 *
 * Description :  The constants define the commands for dynamic
 *                configuration proposals.
 */

#define  MM_TIMER_SET       "TIMER_SET"
#define  MM_TIMER_RESET     "TIMER_RESET"
#define  MM_TIMER_SPEED_UP  "TIMER_SPEED_UP"
#define  MM_TIMER_SLOW_DOWN "TIMER_SLOW_DOWN"
#define  MM_TIMER_SUPPRESS  "TIMER_SUPPRESS"
#define  MM_T3212_CNT       "T3212_CNT"
#define  MM_USE_STORED_BCCH "USE_STORED_BCCH"

#define  MM_FFS_RESET_EPLMN  "FFS_RESET_EPLMN"
#define  MM_FFS_READ_EPLMN   "FFS_READ_EPLMN"
#define  MM_FFS_READ_EPLMN_INIT "FFS_READ_EPLMN_INIT"
#define  MM_FFS_WRITE_EPLMN  "FFS_WRITE_EPLMN"


/*==== TYPES ======================================================*/

/*==== EXPORT =====================================================*/

#endif