view src/g23m-gsm/rr/cnf_rr.h @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 27a4235405c6
children
line wrap: on
line source

/*
+-----------------------------------------------------------------------------
|  Project :
|  Modul   :
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas
|                 Instruments Berlin, AG
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+-----------------------------------------------------------------------------
|  Purpose :  Dynamic Configuration for Radio Resource
+-----------------------------------------------------------------------------
*/

#ifndef CNF_RR_H
#define CNF_RR_H

/*==== CONSTANTS ==================================================*/
/*
 * CONFIGURATION PARAMETER
 *
 * Description :  The constants define the commands for dynamic
 *                configuration proposals.
 */

#define  RR_TIMER_SET       "TIMER_SET"
#define  RR_TIMER_RESET     "TIMER_RESET"
#define  RR_TIMER_SPEED_UP  "TIMER_SPEED_UP"
#define  RR_TIMER_SLOW_DOWN "TIMER_SLOW_DOWN"
#define  RR_TIMER_SUPPRESS  "TIMER_SUPPRESS"

#define  RR_NO_SYS_TIME     "NO_SYS_TIME"
#define  RR_SET_LAST_USED_SC "SET_LAST_USED_SC"
#define  RR_INIT_FFS        "INIT_FFS"
#define  RR_WRITE_FFS       "WRITE_FFS"
#define  RR_FCR             "FCR"
#define  RR_IHO             "IHO"
#define  RR_SCR             "SCR"
#define  RR_DLE             "DLE"
#define  RR_FCA             "FCA"
#define  RR_FRL             "FRL"
#define  RR_FHO             "FHO"
#define  RR_GSM_OFFSET      "GSM_OFFSET"
#define  RR_DCS_OFFSET      "DCS_OFFSET"
#define  RR_CTO             "CTO"
#define  RR_NKC             "NKC"

#define  RR_MT_CALL_NAME    "MTC"
#define  RR_MT_SMS_0_NAME   "MT_SMS_0"
#define  RR_MT_SMS_2_NAME   "MT_SMS_2"
#define  RR_SRV_FULL_NAME   "FULL_SERVICE"
#define  RR_SRV_LIM_NAME    "LIMITED_SERVICE"
#define  RR_SRV_NO          "NO_SERVICE"
#define  RR_PSEUDO_SYNC_HO  "PSEUDO_SYNC_HO"
#define  RR_PCM             "PCM"
#define  RR_DCS_PCLASS_3   "DCS_PCLASS_3"

#define  RR_RESTRICTED_BAND "SET_BAND"
#define  RR_MULTISLOT_CLASS "MULTISLOT_CLASS"
#define  RR_CMSP            "CMSP"

#define  RR_ERASE_BL        "ERASE_BL"
#define  RR_ERASE_WL        "ERASE_WL"
#define  RR_SET_WL          "SET_WL"
#define  RR_SET_WL_PLMN     "SET_WL_PLMN"
#define  RR_SET_BL          "SET_BL"
#define  RR_SET_WL_REGION   "SET_WL_REGION"
#define  RR_SHOW_BL         "SHOW_BL"
#define  RR_SHOW_WL         "SHOW_WL"
#define  RR_SET_NPS_DELAY   "SET_NPS_DELAY"

#if defined(_TARGET_)
#define  RR_FFS_CHECK       "FFS_CHECK"
#endif /* _TARGET_ */
#define  RR_SCS             "SCS"
#define  RR_SHIELD          "SHIELD"
#define  RR_BL_CS           "BL_CS"
#define  RR_U_RXT           "U_RXT"
#define  RR_M_RXT           "M_RXT"
#define  RR_L_RXT           "L_RXT"
#define  RR_TFAST_CS        "TIM_FAST"
#define  RR_TNORMAL_CS      "TIM_NORMAL"
#define  RR_FBLS            "FBLS"

/*==== TYPES ======================================================*/

/*==== EXPORT =====================================================*/

#endif