FreeCalypso > hg > fc-magnetite
view src/g23m-gsm/rr/rr_fors.c @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | 27a4235405c6 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : | Modul : +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Encoding of Air Interface Messages. Send AIMs to DL. +----------------------------------------------------------------------------- */ #ifndef RR_FORS_C #define RR_FORS_C #define ENTITY_RR /*==== INCLUDES ===================================================*/ #include <string.h> #include <stdlib.h> #include "typedefs.h" #include "pcm.h" #include "pconst.cdg" #include "mconst.cdg" #include "message.h" #include "ccdapi.h" #include "vsi.h" #include "custom.h" #include "gsm.h" #include "prim.h" #include "tok.h" #include "rr.h" /*==== EXPORT =====================================================*/ /*==== PRIVAT =====================================================*/ /*==== VARIABLES ==================================================*/ /*==== FUNCTIONS ==================================================*/ /* * ------------------------------------------------------------------- * SIGNAL Processing functions * ------------------------------------------------------------------- */ /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : RR_FOR | | STATE : code ROUTINE : for_dat_encode_send | +--------------------------------------------------------------------+ PURPOSE : Encode an Air Interface Message usinf CCD and send it do DL. */ LOCAL void for_dat_encode_send (void *prim, T_sdu *sdu) { U8 *payload; U16 length; if ( sdu NEQ NULL ) { ccd_codeMsg (CCDENT_RR, UPLINK, (T_MSGBUF *)sdu, _decodedMsg, NOT_PRESENT_8BIT); sdu->buf[sdu->o_buf/8-1] = PD_RR_TI_0; /* RR Protocol Discriminator, Skip Indicator */ sdu->l_buf += 8; sdu->o_buf -= 8; payload = &(sdu->buf[0]); /* Beginning of the buffer */ payload += (sdu->o_buf) >> 3; /* Plus offset (bytes) */ length = BYTELEN(sdu->l_buf); /* Length (bytes) */ RR_BINDUMP (payload,length,ARFCN_NOT_PRESENT, FRAME_NUM_NOT_PRESENT,UPLINK); } PSENDX (DL, prim); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : RR_FOR | | STATE : code ROUTINE : for_dat_data_req | +--------------------------------------------------------------------+ PURPOSE : Encoding of a Layer 3 message and forwarding to Layer 2. */ GLOBAL void for_dat_data_req (T_DL_DATA_REQ *dl_data_req) { TRACE_FUNCTION ("for_dat_data_req()"); for_dat_encode_send ( dl_data_req, &dl_data_req->sdu ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : RR_FOR | | STATE : code ROUTINE : for_dat_est_req | +--------------------------------------------------------------------+ PURPOSE : Start establishment for SMS on SAPI 3. */ GLOBAL void for_dat_est_req (T_DL_ESTABLISH_REQ *dl_establish_req) { TRACE_FUNCTION ("for_dat_est_req()"); dl_establish_req->sdu.l_buf = 0; dl_establish_req->sdu.o_buf = ENCODE_OFFSET; for_dat_encode_send ( dl_establish_req, NULL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : RR_FOR | | STATE : code ROUTINE : for_dat_est_req_not_coding | +--------------------------------------------------------------------+ PURPOSE : Start a connection for an upper layer. */ GLOBAL void for_dat_est_req_not_coding (T_DL_ESTABLISH_REQ *dl_establish_req) { TRACE_FUNCTION ("for_dat_est_req_not_coding()"); for_dat_encode_send ( dl_establish_req, NULL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : RR_FOR | | STATE : code ROUTINE : for_dat_est_req_content | +--------------------------------------------------------------------+ PURPOSE : Start a connection with a layer 3 message from RR. */ GLOBAL void for_dat_est_req_content (T_DL_ESTABLISH_REQ *dl_establish_req) { TRACE_FUNCTION ("for_dat_est_req_content()"); for_dat_encode_send ( dl_establish_req, &dl_establish_req->sdu ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : RR_FOR | | STATE : code ROUTINE : for_dat_l3_data_req | +--------------------------------------------------------------------+ PURPOSE : send an upper layer message to layer 2. */ GLOBAL void for_dat_l3_data_req (T_DL_DATA_REQ *dl_data_req) { TRACE_FUNCTION ("for_dat_l3_data_req()"); for_dat_encode_send ( dl_data_req, NULL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : RR_FOR | | STATE : code ROUTINE : for_dat_reconnect_req | +--------------------------------------------------------------------+ PURPOSE : After a failed handover or channel assignment RR switches back to the old channel. This function starts the reconnection of the layer 2 link. */ GLOBAL void for_dat_reconnect_req (T_DL_RECONNECT_REQ *dl_reconnect_req) { TRACE_FUNCTION ("for_dat_reconnect_req()"); TRACE_EVENT ("DL_RECONNECT_REQ"); for_dat_encode_send ( dl_reconnect_req, &dl_reconnect_req->sdu ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : RR_FOR | | STATE : code ROUTINE : for_dat_resume_req | +--------------------------------------------------------------------+ PURPOSE : After reception of a handover command or assignment command message, layer 1 is configured to a new channel and the layer 2 link is resumed. */ GLOBAL void for_dat_resume_req (T_DL_RESUME_REQ *dl_resume_req) { TRACE_FUNCTION ("for_dat_resume_req()"); for_dat_encode_send ( dl_resume_req, &dl_resume_req->sdu ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : RR_FOR | | STATE : code ROUTINE : for_dat_unitdata_req | +--------------------------------------------------------------------+ PURPOSE : Send an unacknowledged message on the uplink SACCH. This message is a measurement report message from RR. */ GLOBAL void for_dat_unitdata_req (T_DL_UNITDATA_REQ *dl_unitdata_req) { TRACE_FUNCTION ("for_dat_unitdata_req()"); for_dat_encode_send ( dl_unitdata_req, &dl_unitdata_req->sdu ); } #if defined (REL99) && defined (TI_PS_FF_EMR) /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : RR_FOR | | STATE : code ROUTINE : for_dat_spd_unitdata_req | +--------------------------------------------------------------------+ PURPOSE : Send an unacknowledged message on the uplink SACCH with short PD. This is a enhanced measurement report message from RR. */ GLOBAL void for_dat_spd_unitdata_req (T_DL_SHORT_UNITDATA_REQ *p_msg) { T_sdu *sdu = &p_msg->sdu; TRACE_FUNCTION ("for_dat_spd_unitdata_req()"); if ( sdu NEQ NULL ) { ccd_codeMsg (CCDENT_RR_SHORT, UPLINK, (T_MSGBUF *)sdu, _decodedMsg, NOT_PRESENT_8BIT); } p_msg->ch_type=L2_CHANNEL_SACCH; PSENDX (DL, p_msg); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : RR_FOR | | STATE : code ROUTINE : for_dat_process_common_emr_data | +--------------------------------------------------------------------+ PURPOSE : DAT process requests FOR for processing the common EMR parameters */ GLOBAL BOOL for_dat_process_common_emr_data (T_gprs_rep_prio *p_rep, T_gprs_bsic *p_bl, UBYTE msg_index, BOOL ba_available) { TRACE_FUNCTION ("for_dat_process_common_emr_data()"); return(for_process_common_emr_data ( p_rep,p_bl,msg_index, ba_available)); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : RR_FOR | | STATE : code ROUTINE : for_att_update_ba2bsic_mapping | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL void for_att_update_ba2bsic_mapping(T_rr_enh_para *p_enh) { GET_INSTANCE_DATA; UBYTE i; USHORT *p_list = rr_data->act_ncell_list; T_enh_cell_list *p_enh_list = p_enh->enh_para.enh_cell_list; for (i = 0; i < p_enh->enh_para.num_valid_cells ; i++ ) { if ( (((p_enh->ba2bsic_map_pending >> i) & 0x1) EQ TRUE) AND ( p_list[(UBYTE)p_enh_list[i].arfcn] NEQ NOT_PRESENT_16BIT ) ) p_enh_list[i].arfcn = p_list[(UBYTE)p_enh_list[i].arfcn]; } p_enh->ba2bsic_map_pending = 0; return; } #endif #endif