view src/g23m-gsm/ss/cus_ss.h @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 27a4235405c6
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  CUS_SS
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Custom dependent definitions for SS of the
|             mobile station
|             
|             Use this header for definitions to integrate the
|             protocol stack entity SS in your target system !
+----------------------------------------------------------------------------- 
*/ 

#ifndef CUS_SS_H
#define CUS_SS_H

/*==== CONSTANTS ==================================================*/
 /*
 * VSI_CALLER
 *
 * Description :  For multithread applications the constant VSI_CALLER
 *                must be defined to identify the calling thread of the
 *                VSI-Interface. This must be done correponding to the
 *                type of T_VSI_CALLER in VSI.H. The comma symbol is
 *                neccessary because the vsi-functions are called
 *                like this vsi_xxx (VSI_CALLER par2, par3 ...)
 */
#if defined (NEW_FRAME)
#ifdef OPTION_MULTITHREAD
#define VSI_CALLER ss_handle,
#define VSI_CALLER_SINGLE ss_handle
#else
#define VSI_CALLER
#endif
#else
#ifdef OPTION_MULTITHREAD
#define VSI_CALLER SS_NAME,
#else
#define VSI_CALLER
#endif
#endif

/*
 * VERSION
 *
 * Description :  The constants define the type and the value
 *                of a version identification. The version
 *                is part of the monitor struct.
 */


#define T_VERSION   char
#define VERSION_SS  "SS 1.0"

#endif