view src/gpf2/inc/drvconf.h @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 864b8cc0cf63
children
line wrap: on
line source

/* 
+------------------------------------------------------------------------------
|  File:       drvconf.h
+------------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definitions for the dynamic driver configuration.
+----------------------------------------------------------------------------- 
*/ 

#ifndef DRVCONF_H
#define DRVCONF_H

/*==== INCLUDES =============================================================*/
#include "typedefs.h"
#include "gdi.h"
#include "vsi.h"

/*==== CONSTS ===============================================================*/

#if defined _TARGET_
 #define MAX_AVAILABLE_DRV 1
#else
 #define MAX_AVAILABLE_DRV 6
#endif

#define TIF_NAME              "TIF"
#define TR_NAME               "TR"
#define EMI_NAME              "EMI"
#define SOCKET_NAME           "SOCKET"
#define MTST_NAME             "MTST"
#define SER_NAME              "SER"
#define THIF_LINK_NAME        "THIFLINK"
#define USERSPACE_LINK_NAME   "USSPLINK"
#define TITRC_NAME            "TITRC"
#define NODRV_NAME            "NODRV"

#define DRV_DEFAULT       "DEFAULT"
#define DRV_TI_MODE       "TI_MODE"
#define DRV_RAW_TI_MODE   "RAW_TI_MODE"
#define TIF_PCON_ENABLE   "ENABLE_PCON"
#define TR_STX_LF         "STX_LF"
#define ENABLE_SYNC_MODE  "ENA_SYNC_MODE"
#define DISABLE_SYNC_MODE "DIS_SYNC_MODE"

#define FILTER            "FILTER"

#define DRV_SIGTYPE_READ_L1   0x100
#define DRV_SIGTYPE_READ_RIV  0x200

/*==== TYPES ================================================================*/

typedef struct
{
  T_DRV_LIST_ENTRY entry;  
  USHORT drv_pos;
} T_TST_DRV_ENTRY;

/*==== EXPORTS ==============================================================*/

SHORT tst_drv_open (char *drv_name, T_TST_DRV_ENTRY **drv_info );


#endif /* DRVCONF_H */