FreeCalypso > hg > fc-magnetite

view src/gpf2/misc/makefile @ 632:d968a3216ba0

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents cd37d228dae0
children
line wrap: on
line source

#######################  Makefile for GNU make    #####################
#
#           makefile to build misc.lib
#
#           ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#           ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#
#           targets:
#
#           misc.lib       functions which belong neither to frame nor to tif, somehow old files
#           clean          delete temp files
#
#######################################################################

OWN_MAKELEVEL=0


VPATH=$(OBJDIR)

#---------- Directories

ifeq ($(TARGET), nuc)
  ifeq ($(RUN_FLASH), 1)
    SECTION:=/fl
  endif

  ifeq ($(RUN_INT_RAM), 1)
    SECTION:=/ir
  endif
else
  SECTION:=
endif

ifdef TOOL_CHOICE
  TS:=/ts$(TOOL_CHOICE)
  tsTail  :=_ts$(TOOL_CHOICE)
else
  TS:=
endif

ifdef PATH_CC_1_22E 
 PATH:=$(PATH_CC_1_22E);$(PATH)
 C_DIR:=$(PATH_CC_1_22E)
endif

ifeq ($(TOOL_CHOICE), 3)
 COPTS= --align_structs=4 -pden -o -q
 ifndef PATH_CC_2_54 
   PATH_CC_2_54=C:/Dvpt_tools/Codegen/TMS4701x_2.54
   C_DIR=PATH_CC_2_54
 endif
 Path:=$(PATH_CC_2_54)/bin;$(Path)
 INCLUDES += -I"$(PATH_CC_2_54)/include"
endif

ifeq ($(TOOL_CHOICE), 5)
 COPTS= --align_structs=4 -pden -o -q
 ifndef PATH_CC_2_55 
   PATH_CC_2_55=C:\Dvpt_tools\Codegen\TMS4701x_2.55
#  C_DIR=PATH_CC_2_55
 endif
 Path:=$(PATH_CC_2_55)/bin;$(Path)
 INCLUDES += -I"$(PATH_CC_2_55)/include"
endif

ifeq ($(TOOL_CHOICE), 6)
  # --code_state=16 => -mt
  # --endian=little => -me
  # what is -ml?
  COPTS= -mv=5e --abi=ti_arm9_abi
  COPTS+= -pden -pdv -mf -ms -qq -disable_branch_chaining -pi
  COPTS+= -O=2
  ifndef PATH_CC_4_11 
    PATH_CC_4_11=C:\Dvpt_tools\Codegen\TMS4701x_4.11
#   C_DIR=PATH_CC_4_11
  endif
  Path:=$(PATH_CC_4_11)/bin;$(Path)
  INCLUDES += -I"$(PATH_CC_4_11)/include"
endif

ifeq "$(CLEARCASE_PRIMARY_GROUP)" ""
  CLRCAS=0
else
  ifeq "$(IN_VOB)" "FALSE"
    CLRCAS=0
  else
    CLRCAS=1
  endif
endif

ifeq ($(CLRCAS), 1)
  CHECKOUT = -cleartool co -nc
  CHECKIN = -cleartool ci -nc
else
  CHECKOUT = attrib -r
  CHECKIN = attrib +r
endif

# for created object files
# general directories
GPFDIR=..
INCDIR=../inc
ifeq ($(TARGET), nuc)
  OBJDIR=obj/$(TARGET)/$(PLATFORM)$(DB)$(PS)$(SECTION)$(TS)
else
  OBJDIR=obj/$(TARGET)$(DB)$(PS)
endif

# for stack calculation
GAWK=../tools/bin/gawk.exe
AWK_PROG=../BIN/cg$(tTail).awk

# Lint
LINT=lint-nt.exe
LINT_INC=-i/gpf/template/lint/
LINT_OPT_FILE=/gpf/template/lint/options.lnt

# for created libraries
ifeq ($(TARGET), win32)
  LIBDIR=../LIB/WIN32$(DEBUGDIR)
  BINDIR=../BIN$(DEBUGDIR)
else
  LIBDIR=../LIB
endif

#-------------------------globaly exported header files
INC_FILES=Tools.h

#-------------------------Suffixes for the name of the output file
#---------e.g. misc_tr_db.lib

ifeq ($(RUN_FLASH), 1)
   flTail :=_fl
else
   flTail:=
endif

ifeq ($(RUN_INT_RAM), 1)
   irTail :=_ir
else
   irTail:=
endif

ifeq ($(TARGET), nuc)
  ifeq ($(PLATFORM), arm7)
    tTail :=_na7
  else
    ifeq ($(PLATFORM), arm9)
      tTail :=_na9
    else
      ifeq ($(PLATFORM), pc)
        tTail :=_npc
      endif
    endif
  endif
else
  ifeq ($(TARGET), nuc_ARM)
    tTail :=_ar
  else
    ifeq ($(TARGET), win32)
      tTail :=
    else
      ifeq ($(TARGET), psos)
        tTail :=_po
      else
   	ifeq ($(TARGET), vxworks)
	  tTail :=_vx
    	  ifeq ($(TOOL), gnu)
	    tlTail :=_gn
          else
	    tlTail :=_di
	  endif
    	  ifeq ($(CPU), PPC603)
	    cpTail :=_pp
	  endif
        else
          ifeq ($(TARGET), linuxpc)
            tTail :=_lpc
            OSENV=sus
            NO_LINT=1
          else
            ifeq ($(TARGET), rtlpc)
              tTail :=_rlp
              OSENV=sus
              NO_LINT=1
	      RTL_VERSION=2.0
	      RTL_DIR=/opt/rtldk-$(RTL_VERSION)/rtlinuxpro
	      include $(RTL_DIR)/rtl.mk
            else
              ifeq ($(TARGET), linuxarm)
                tTail :=_la9
                OSENV=sus
                NO_LINT=1
	      else
                ifeq ($(TARGET), solsparc)
                  tTail :=_ssp
                  OSENV=sus
                  NO_LINT=1
                endif
              endif
            endif
          endif
	endif
      endif
    endif
  endif
endif

ifeq ($(DEBUG), 1)
   DB=/db
   ifeq ($(TARGET), win32)
     DEBUGDIR=/debug
     dbTail :=
   else
     dbTail :=_db
   endif
else
   dbTail:=
   DB=
endif

XXX:=$(tTail)$(tlTail)$(cpTail)$(dbTail)$(irTail)$(flTail)$(tsTail)

_MISC_OBJS=printtofile.$(OBJTAIL) tok.$(OBJTAIL) tools.$(OBJTAIL) misc_version.$(OBJTAIL)

ifeq ($(OSENV), sus)
  MKDIR           = mkdir
else
  MKDIR           = gmkdir
endif
COPY            = cp
CLEARTOOL		= cleartool
ECHO			= @echo

#---------- Special settings for each target: for Nucleus
ifeq ($(TARGET), nuc)
  ifeq ($(PLATFORM), arm7)

    ifeq ($(TOOL_CHOICE), )
     COPTS+= -mw -x -pw2 -q -o
    endif

    CC=cl470
    COPTS+= -me -mt

    ifeq ($(DEBUG), 1)
      ifeq ($(TOOL_CHOICE), )
        COPTS += -g
      else
        COPTS += -gt
      endif
      COPTS += -mn   
    endif

    ifeq ($(ASM_ONLY), 1)
      COPTS+= -q -n -x0 -fs $(OBJDIR) 
      MKLIB = $(GAWK) -f $(AWK_PROG) > $(MISC_LIB)
      OBJTAIL = asm
      MISC_LIB = $(OBJDIR)/misc$(XXX).pa
    else
      OBJTAIL = obj
      MKLIB=ar470  $(LFLAGS)
      MISC_LIB=$(LIBDIR)/misc$(XXX).$(LIBEXT)
      LINT_OPTS = $(LINT_INC) -I"$(subst \,/,$(C_DIR))" -u $(LINT_OPT_FILE)

    endif

    COPTS += -fr $(OBJDIR) -c

    ifeq ($(RUN_INT_RAM), 1)
      COPTS += -dRUN_INT_RAM
    endif

    ifeq ($(RUN_FLASH), 1)
      COPTS += -dRUN_FLASH
    endif

    INCLUDES+= -I"." -I"..\inc\NUC" -I"..\inc\NUC\ARM7" -I"..\inc"

    DEFINES += -d_TARGET_ -d_NUCLEUS_
    COPTSNF = $(COPTS) $(DEFINES) $(INCLUDES)
    INCLUDELIST=$(subst /I ,-I,$(INCLUDES)) # because of CDGINCDIR above
    DEFINELIST=$(subst -d,-D,$(DEFINES))
    COMMLFLAGS = -rq $@      # only one command is allowed and it is "r" for replace
    LFLAGS=$(COMMLFLAGS)
    LIBEXT=lib

    clean:
		@$(RM) obj/$(TARGET)/$(PLATFORM)$(DB)$(SECTION)$(TS)/*.$(OBJTAIL)
		@$(RM) $(MISC_LIB)

  endif
endif         # nucleus & arm7

ifeq ($(TARGET), nuc)
  ifeq ($(PLATFORM), arm9)

    CC=cl470

    COPTS+= -me -mt

    ifeq ($(DEBUG), 1)
      ifeq ($(TOOL_CHOICE), 6)
        COPTS += --symdebug:coff
      else
        # toolset 3 and 5
        COPTS += -gt
      endif
      COPTS += -mn   
    endif

    LINT_OPTS = $(LINT_INC) -I"$(subst \,/,$(C_DIR))" -u $(LINT_OPT_FILE)

    COPTS += -fr $(OBJDIR) -c

    ifeq ($(RUN_INT_RAM), 1)
      COPTS += -dRUN_INT_RAM
    endif

    ifeq ($(RUN_FLASH), 1)
      COPTS += -dRUN_FLASH
    endif

    INCLUDES+= -I"." -I"..\INC\NUC" -I"..\INC\NUC\ARM9" -I"..\INC"
    MKLIB=ar470 $(LFLAGS)
 
    DEFINES += -d_TARGET_ -d_NUCLEUS_
    COPTSNF = $(COPTS) $(DEFINES) $(INCLUDES)
    INCLUDELIST=$(subst /I ,-I,$(INCLUDES)) # because of CDGINCDIR above
    DEFINELIST=$(subst -d,-D,$(DEFINES))
    COMMLFLAGS = -rq $@      # only one command is allowed and it is "r" for replace
    LFLAGS=$(COMMLFLAGS)
    LIBEXT=lib
    OBJTAIL=obj
    MISC_LIB=$(LIBDIR)/misc$(XXX).$(LIBEXT)

    clean:
		@$(RM) obj/$(TARGET)/$(PLATFORM)$(DB)$(SECTION)$(TS)/*.$(OBJTAIL)
		@$(RM) $(MISC_LIB)

  endif
endif         # nucleus & arm9


#---------- Special settings for each target: for Nucleus_ARM
ifeq ($(TARGET), nuc_ARM)

   CC=perl "\G23M\Condat\INT\BIN\gti_compile.pl"
   COPTS= -me -mt -pw2 -q  -x -mw -o  # from condat_env.mak and os.mak for nucleus.lib

   ifeq ($(DEBUG), 1)
      COPTS += -g -mn
   endif
   COPTS += -fr $(OBJDIR) -fo $(OBJDIR)/$@ -c


#new    INCLUDES+= -I"..\inc\NUC" -I"..\inc\NUC\ARM7" -I"..\inc"
    INCLUDES+= -I"..\inc\NUC" -I"..\inc"
    DEFINES += -d_TARGET_ -d_NUCLEUS_
    COPTSNF = $(COPTS) $(DEFINES) $(INCLUDES)
    INCLUDELIST=$(subst /I ,-I,$(INCLUDES)) # because of CDGINCDIR above
    DEFINELIST=$(subst -d,-D,$(DEFINES))

   COMMLFLAGS = -rq $@      # only one command is allowed and it is "r" for replace
   LFLAGS=$(COMMLFLAGS)
   MKLIB=perl "\G23M\Condat\INT\BIN\gti_archive.pl" $(LFLAGS)
   LIBEXT=lib
   OBJTAIL=obj
   MISC_LIB=$(LIBDIR)/misc$(XXX).$(LIBEXT)

    clean:
		@$(RM) obj/$(TARGET)$(DB)/*.$(OBJTAIL)
		@$(RM) $(MISC_LIB)

endif         # target: nucleus_ARM


#---------- Special settings for each target: for NucWin
ifeq ($(TARGET), nuc)
  ifeq ($(PLATFORM), pc)

    CC=cl
    COPTS += /c /nologo /W3 /GX /Zp1 /GZ

    ifeq ($(DEBUG), 1)
      COPTS += /MD /DEBUG  /Z7
      DEFINES += -D"_DEBUG"
    else
      COPTS += /MT
    endif

    COPTS += /FR"..\temp\nucwin"  /Fd"..\temp\nucwin" /Fo./$(OBJDIR)/

    INCLUDES += -I"..\inc\NUC" -I"..\inc\NUC\PC" -I"..\inc" \
                -I"$(GSMDIR)\CDGINC\cdginc_fd"

    DEFINES += -D"_NUCLEUS_"
    COPTSNF = $(COPTS) $(DEFINES) $(INCLUDES)
    LINT_OPT_FILE += co-msc50.lnt
    LINT_OPTS = $(LINT_INC) -D_M_IX86 -I"NUC" -u $(LINT_OPT_FILE)
    INCLUDELIST=$(subst /I ,-I,$(INCLUDES))
    DEFINELIST=$(subst /D ,-D,$(DEFINES))
    COMMLFLAGS =  /nologo  /subsystem:console  /machine:I386

    LFLAGS=$(COMMLFLAGS)
    MKLIB=LIB /out:$@ $(LFLAGS)
    LIBEXT=lib
    OBJTAIL=obj
    MISC_LIB=$(LIBDIR)/misc$(XXX).$(LIBEXT)

    clean:
		@$(RM) obj/$(TARGET)/$(PLATFORM)$(DB)/*.$(OBJTAIL)
		@$(RM) $(MISC_LIB)

  endif
endif         # nucleus & pc



#---------- Special settings for each target: for Win32
ifeq ($(TARGET), win32)

   FRAMEXXX:=$(tTail)$(trTail)$(rtTail)$(dbTail)$(msTail)
   CC=cl
   COPTS += /c /nologo /W3 /GX /Zp1 /GZ

   COPTS += /FR"..\temp\win32"  /Fd"..\temp\win32" /Fo./$(OBJDIR)/

   INCLUDES += -I"..\inc\WIN32" -I"..\inc"

   INCLUDES += -I"..\lib\win32"

   LINT_OPT_FILE += co-msc50.lnt
   LINT_OPTS = $(LINT_INC) -D_WIN32 -D_M_IX86 -D_MSC_VER -I"WIN32" -u $(LINT_OPT_FILE)

   DLLFLAGS= /dll /implib:"$(LIBDIR)/misc$(XXX).lib" /def:"misc.def"

   COMMLFLAGS = $(DLLFLAGS)
   COMMLFLAGS += /nologo

   ifeq ($(DEBUG), 1)
     DEFINES += -D"_DEBUG"
     COPTS += /DEBUG /MDd /Zi
     COMMLFLAGS += /DEBUG /incremental:no /pdb:none
   else
     COPTS += /MD
   endif

   DEFINES += -D"_TOOLS_"
   COPTSNF = $(COPTS) $(DEFINES) $(INCLUDES)
   INCLUDELIST=$(subst /I ,-I,$(INCLUDES))
   DEFINELIST=$(subst /D ,-D,$(DEFINES))

   LFLAGS=$(COMMLFLAGS)
   MKLIB=link.exe /out:$@ $(LFLAGS)
   LIBEXT = dll
   OBJTAIL=obj
   IMPLIB=$(LIBDIR)/misc$(XXX).lib
   MISC_LIB=$(BINDIR)/misc$(XXX).$(LIBEXT)


   clean:
	    $(RM) $(OBJDIR)/*.$(OBJTAIL)
	    $(RM) $(IMPLIB) $(MISC_LIB)


endif         # target: win32



#---------- Special settings for each target: for pSOS+
ifeq ($(TARGET), psos)

   CC=cc386
   COPTS_FILE:=c.opt

   -include $(PSS_BSP)/bsp.mk# board support settings e.g. MODEL, FPU

   ifeq ( FPU,H )
      FPUOPT = -VNDP
   else
      FPUOPT=
   endif

   COPTS1  =       -c -V$(MODEL) -VROM -VBSS -VANSI -VLONGNAME -VSPROTO -VQUIET -VDIAGNOSTICS
   COPTS2  =       $(FPUOPT)
   COPTS3  =       -I. -I$(PSS_ROOT)/include -I$(PSS_BSP)
   COPTS4  =        -I./ -I../inc/ -I../inc/psos/
   COPTS5  =       -DMODEL=$(MODEL) -VNOSIGNEDCHAR -D__CADUL__=1 -DPSOS=1 -D_PSOS_

   ifeq ($(DEBUG), 1)
      COPTS5 += -VXDB
   endif


   COPTS   =       @c.opt
   COPTS += -o $(OBJDIR)/$@
   COPTSNF = $(COPTS)
   LIBEXT = lib
   OBJTAIL=obj
   MKLIB= lib386 $@         # psos related libs will not be included here
   MISC_LIB=$(LIBDIR)/misc$(XXX).$(LIBEXT)

c.opt:  makefile
	@echo $(COPTS1) >  c.opt
	@echo $(COPTS2) >> c.opt
	@echo $(COPTS3) >> c.opt
	@echo $(COPTS4) >> c.opt
	@echo $(COPTS5) >> c.opt

   clean:
	@$(RM) obj/$(TARGET)$(DB)/*.$(OBJTAIL)
	@$(RM) $(MISC_LIB)
	@$(RM) *.opt

endif         # target: psos

#---------- Special settings for each target: for VxWorks GNU
ifeq ($(TARGET), vxworks)

    CC = ccppc

  ifeq ($(DEBUG), 1)
    COPTSNF  = -g
  else
    COPTSNF  = -O2
  endif
    COPTSNF += -c -mstrict-align -ansi -nostdinc -DRW_MULTI_THREAD -D_REENTRANT \
               -fvolatile -fno-builtin -fno-for-scope -DCPU=$(CPU) \
               -I$(WIND_BASE)/target/h -I. -I../inc -I../inc/$(TARGET) \
               -D_VXWORKS_

    COPTSNF += -o $(OBJDIR)/$@
    LIBEXT   = a
    OBJTAIL=obj
    MISC_LIB = $(LIBDIR)/misc$(XXX).$(LIBEXT)
    MKLIB      = arppc crus $(MISC_LIB)

  clean:
		@$(RM) obj/$(TARGET)$(DB)/*.$(OBJTAIL)
		@$(RM) $(MISC_LIB)

endif
# target: vxworks

#---------- Special settings sus environment
ifeq ($(OSENV), sus)
   COPTS += -c -o$(OBJDIR)/$@
   INCLUDES += -I../inc/$(OSENV) -I../inc -I../FRAME -I../FRAME/$(OSENV) -I.
   INCLUDES +=  -I../CCD
   ifeq ($(MEMSUPER), 2)
     DEFINES += -DMEMORY_SUPERVISION -DOPTIMIZE_POOL
   endif
   ifeq ($(MEMSUPER), 1)
     DEFINES += -DMEMORY_SUPERVISION
   endif
   # the following should be adapted for other unix-like systems

   DEFINES += -DSHARED_VSI -DNEW_FRAME
   OBJTAIL = o
   LIBEXT= a
   ifeq ($(TARGET), rtlpc)
     DEFINES += -D_LINUX_
     COPTSNF = $(CFLAGS)
     MKLIB= i386-linux-ar ruv $@
     RANLIB= i386-linux-ranlib
     DEFINES += -D_RT_LINUX_
   else
     ifeq ($(TARGET), linuxarm)
       DEFINES += -D_LINUX_
       CC=arm-linux-gcc
       MKLIB= arm-linux-ar ruv $@
       RANLIB= arm-linux-ranlib
       DEFINES += -DGSP_TARGET
     else
       ifeq ($(TARGET), solsparc)
         DEFINES += -D_SOLARIS_
         CC=gcc
         MKLIB= ar ruv $@
         RANLIB= ranlib
       else
         DEFINES += -D_LINUX_
         CC=gcc
         MKLIB= ar ruv $@
         RANLIB= ranlib
       endif
     endif
   endif
   COPTSNF += $(COPTS) $(DEFINES) $(INCLUDES)
   MISC_LIB = $(LIBDIR)/libmisc$(XXX).$(LIBEXT)
   MKLIB= ar ruv $@
  clean:
		@$(RM) obj/$(TARGET)$(DB)/*.$(OBJTAIL)
		@$(RM) $(MISC_LIB)
endif

#########################  misc.lib    ##################################

MISC_OBJS=$(patsubst %.$(OBJTAIL),$(OBJDIR)/%.$(OBJTAIL),$(_MISC_OBJS))

asm: $(MISC_LIB) $(OBJDIR)

misc.$(LIBEXT): $(MISC_LIB)

$(OBJDIR) :
	$(MKDIR) -p $(OBJDIR)

$(MISC_LIB) : $(OBJDIR) $(COPTS_FILE) $(_MISC_OBJS)  makefile
#  OWN_MAKELEVEL == 0 if makefile called directly, == 1 if nested
ifneq ($(OWN_MAKELEVEL), 0)
	@echo checking out and touching using $(MAKE)
	$(CHECKOUT) $@ $(IMPLIB)
	touch -c $@ $(IMPLIB)
else
	gnumake MAKE=gnumake OWN_MAKELEVEL=1 $(subst \,/,$@ $<)
	@echo proceeding using $(MAKE)
	$(MKLIB)  $(MISC_OBJS)
  ifeq ($(OSENV), sus)
		$(RANLIB) $@
  endif
endif

$(_MISC_OBJS): %.$(OBJTAIL):	%.c
	$(RM) $(OBJDIR)/misc_version.$(OBJTAIL)
ifneq ($(NO_LINT), 1)
	$(LINT) $(LINT_OPTS) $(DEFINES) $(INCLUDES) $<
endif	
	$(CC) $(COPTSNF) $<

SRCFILES=$(patsubst %.$(OBJTAIL),%.c,$(_MISC_OBJS))
MISC_DEP=dep_misc_$(PROJECT)$(XXX).mk

help:
	$(ECHO) usage...
	$(ECHO) building:
	$(ECHO) "gnumake [DEBUG={1|0}] [ROUTING={1|0}] [MEMSUPER={1|0}] ..."
	$(ECHO) cleaning:
	$(ECHO) "gnumake clean [DEBUG={1|0}] [ROUTING={1|0}] [MEMSUPER={1|0}] ..."
	$(ECHO) ClearCase:
	$(ECHO) "gnumake checkin - not implemeted yet -"
	$(ECHO) "gnumake label LABEL=<label type> [FLOAT={1|0}] [DEBUG={1|0}] [ROUTING={1|0}] "
	$(ECHO) "        [MEMSUPER={1|0}] ..."
	$(ECHO) help:
	$(ECHO) "gnumake help"

DEPEND_DIRS=$(GPFDIR) $(LIBDIR) $(BINDIR) $(INCDIR)
EXPORT_FILES=$(IMPLIB) $(MISC_LIB)
INCLUDE_FILES=$(patsubst %,../inc/%,$(INC_FILES))

label:
	-$(CLEARTOOL) mklabel -recurse $(REPLACE) $(LABEL) . 2>> error.log
	-$(CLEARTOOL) mklabel $(REPLACE) $(LABEL) $(DEPEND_DIRS) \
	                      $(EXPORT_FILES) $(INCLUDE_FILES) 2>> error.log

depend: $(SRCFILES)
	@touch $(MISC_DEP)
	makedepend -b -f$(MISC_DEP) $^ -Y -o.$(OBJTAIL) $(INCLUDELIST) $(DEFINELIST)
	@$(RM) $(MISC_DEP).bak

-include $(MISC_DEP)