FreeCalypso > hg > fc-magnetite
view src/gpf2/tst/drv/ser_tr.c @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | cd37d228dae0 |
children |
line wrap: on
line source
/* +------------------------------------------------------------------------------ | File: ser_tr.c +------------------------------------------------------------------------------ | Copyright 2004 Texas Instruments Deutschland, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Deutschland, AG. +----------------------------------------------------------------------------- | Purpose : This Modul contains the serial driver adaptation +----------------------------------------------------------------------------- */ #ifndef __SER_TR_C__ #define __SER_TR_C__ #endif #include "typedefs.h" #include "traceswitch.h" #include "serialswitch.h" #include "gdi.h" #include "tstheader.h" /*==== TYPES ======================================================*/ typedef struct { USHORT Handle; USHORT EnabledSignalType; T_DRV_CB_FUNC Callback; char Connected; } T_SER_TR_DATA; /*==== CONSTANTS ==================================================*/ #define ALLOWED_SER_TR_SIGNALS (DRV_SIGTYPE_READ|DRV_SIGTYPE_CONNECT) /*==== EXTERNALS ==================================================*/ #ifdef RUN_FLASH USHORT SER_TR_Write ( void *Buffer, ULONG *BytesToWrite ); #endif /*==== VARIABLES ==================================================*/ #ifndef RUN_INT_RAM T_SER_TR_DATA SER_TR_Data; #endif static T_DRV_SIGNAL Signal; /*==== FUNCTIONS ==================================================*/ #ifndef RUN_INT_RAM /* +--------------------------------------------------------------------+ | PROJECT : GSM-Frame (8415) MODULE : SER | | STATE : code ROUTINE : Callback | +--------------------------------------------------------------------+ PURPOSE : callback function of the driver */ void Callback ( void ) { if ( SER_TR_Data.EnabledSignalType & DRV_SIGTYPE_READ ) { Signal.SignalType = DRV_SIGTYPE_READ; Signal.DrvHandle = SER_TR_Data.Handle; (SER_TR_Data.Callback)( &Signal ); } } #endif #ifndef RUN_INT_RAM /* +--------------------------------------------------------------------+ | PROJECT : GSM-Frame (8415) MODULE : SER | | STATE : code ROUTINE : SER_TR_Exit | +--------------------------------------------------------------------+ PURPOSE : exit a driver */ void SER_TR_Exit ( void ) { } #endif #ifndef RUN_INT_RAM /* +--------------------------------------------------------------------+ | PROJECT : GSM-Frame (8415) MODULE : SER | | STATE : code ROUTINE : SER_TR_Read | +--------------------------------------------------------------------+ PURPOSE : read data from driver */ USHORT SER_TR_Read ( void *Buffer, ULONG *BytesToRead ) { *BytesToRead = (USHORT)SER_tr_ReadNChars ( SER_LAYER_1, Buffer, *BytesToRead ); return DRV_OK; } #endif #ifndef RUN_FLASH /* +--------------------------------------------------------------------+ | PROJECT : GSM-Frame (8415) MODULE : SER | | STATE : code ROUTINE : SER_TR_Write | +--------------------------------------------------------------------+ PURPOSE : write data to driver */ USHORT SER_TR_Write ( void *Buffer, ULONG *BytesToWrite ) { ULONG ToWrite = *BytesToWrite & ~PRIM_FLAG_MASK; ULONG BytesWritten; char *ptr = (char*)Buffer; ptr--; *ptr = 0x13; ToWrite += 1; BytesWritten = (ULONG)SER_tr_WriteNBytes (SER_LAYER_1, (SYS_UWORD8*)ptr, (SYS_UWORD32)ToWrite); *BytesToWrite = BytesWritten; return ( DRV_OK ); } #endif #ifndef RUN_INT_RAM /* +--------------------------------------------------------------------+ | PROJECT : GSM-Frame (8415) MODULE : SER | | STATE : code ROUTINE : SER_TR_SetSignal | +--------------------------------------------------------------------+ PURPOSE : enable signal for the driver */ USHORT SER_TR_SetSignal ( USHORT SignalType ) { if ( !(SignalType & ALLOWED_SER_TR_SIGNALS) ) return DRV_INVALID_PARAMS; else SER_TR_Data.EnabledSignalType |= SignalType; return DRV_OK; } #endif #ifndef RUN_INT_RAM /* +--------------------------------------------------------------------+ | PROJECT : GSM-Frame (8415) MODULE : SER | | STATE : code ROUTINE : SER_TR_ResetSignal | +--------------------------------------------------------------------+ PURPOSE : disable signal for the driver */ USHORT SER_TR_ResetSignal ( USHORT SignalType ) { if ( !(SignalType & ALLOWED_SER_TR_SIGNALS) ) return DRV_INVALID_PARAMS; else SER_TR_Data.EnabledSignalType &= ~SignalType; return DRV_OK; } #endif #ifndef RUN_INT_RAM /* +--------------------------------------------------------------------+ | PROJECT : GSM-Frame (8415) MODULE : SER | | STATE : code ROUTINE : SER_TR_SetConfig | +--------------------------------------------------------------------+ PURPOSE : set configuration for the driver */ USHORT SER_TR_SetConfig ( char *Buffer ) { if ( !SER_TR_Data.Connected ) { Signal.SignalType = DRV_SIGTYPE_CONNECT; Signal.DrvHandle = SER_TR_Data.Handle; Signal.UserData = NULL; (SER_TR_Data.Callback)( &Signal ); SER_TR_Data.Connected = TRUE; return DRV_OK; } return DRV_OK; } #endif #ifndef RUN_INT_RAM /* +--------------------------------------------------------------------+ | PROJECT : GSM-Frame (8415) MODULE : SER | | STATE : code ROUTINE : SER_TR_Init | +--------------------------------------------------------------------+ PURPOSE : initialize driver */ USHORT SER_TR_Init ( USHORT DrvHandle, T_DRV_CB_FUNC CallbackFunc, T_DRV_EXPORT const **DrvInfo ) { static const T_DRV_EXPORT SER_TR_Info = { "SER", CALLED_FROM_ISR, { #ifdef _TOOLS_ SER_TR_TR_Init, #endif SER_TR_Exit, SER_TR_Read, SER_TR_Write, NULL, NULL, NULL, SER_TR_SetSignal, SER_TR_ResetSignal, SER_TR_SetConfig, NULL, NULL, } }; SER_TR_Data.Handle = DrvHandle; SER_TR_Data.EnabledSignalType = 0; SER_TR_Data.Callback = CallbackFunc; SER_TR_Data.Connected = FALSE; SER_tr_Init ( SER_LAYER_1, TR_BAUD_115200, Callback ); *DrvInfo = &SER_TR_Info; return DRV_OK; } #endif