view src/gpf2/tst/drv/socket.h @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents cd37d228dae0
children
line wrap: on
line source

/* 
+------------------------------------------------------------------------------
|  File:       socket.h
+------------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This Modul contains the serial driver adaptation
+----------------------------------------------------------------------------- 
*/ 

#ifndef  SOCKET_H
#define  SOCKET_H

/*==== INCLUDES =============================================================*/
#include "typedefs.h"
#include "gdi.h"

#ifdef _VXWORKS_
  /* wha!??? */
  #define SO_DONTLINGER   (~SO_LINGER)  /* Older SunOS compat. hack */
  #define TCP_NODELAY     1
#endif

/*==== DEFINITIONS ==========================================================*/
#define SOCKET_SIGTYPE_CONNECT	DRV_SIGTYPE_USER    /* Connected event signal*/
#define SOCKET_SIGTYPE_RELEASE	(DRV_SIGTYPE_USER+1)/* Released event signal */

#define SOCKET_ERRUNSPEC        (DRV_RETVAL_USER+1)
#define SOCKET_NOCONNECT        (DRV_RETVAL_USER+2)

#define SOCKET_INVALID_PORT     0  
#define SOCKET_MAX_LEN_HOSTNAME	64

/*==== TYPES ================================================================*/
typedef struct
{
	USHORT      port;
  USHORT      tx_buffer_size ;
  USHORT      rx_buffer_size ;
  ULONG       tx_timeout_msec ;
  ULONG       rx_timeout_msec ;
	char        hostname[SOCKET_MAX_LEN_HOSTNAME+1] ;
  USHORT      config;
} socket_DCB_Type;

/*==== FUNCTIONS ============================================================*/
EXTERN USHORT socket_Init ( USHORT DrvHandle, T_DRV_CB_FUNC CallbackFunc, T_DRV_EXPORT const **DrvInfo ) ;
EXTERN void   socket_Exit (void) ;
EXTERN USHORT socket_Open (void) ;
EXTERN USHORT socket_Close (void) ;
EXTERN USHORT socket_Read (void* out_BufferPtr, ULONG*	thr_BufferSizePtr) ;
EXTERN USHORT socket_Write (void*	in_BufferPtr, ULONG*	thr_BufferSizePtr) ;
EXTERN USHORT socket_Flush (void) ;
EXTERN USHORT socket_SetSignal (USHORT SignalType) ;
EXTERN USHORT socket_ResetSignal (USHORT	SignalType) ;
EXTERN USHORT socket_SetConfig (char*	in_DCBPtr) ;
EXTERN USHORT socket_GetConfig (socket_DCB_Type*	out_DCBPtr) ;

/*==== END OF FILE ==========================================================*/
#endif