view src/gpf2/tst/idle.h @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents cd37d228dae0
children
line wrap: on
line source

/*
+------------------------------------------------------------------------------
|  File:       idle.h
+------------------------------------------------------------------------------
|                 Copyright Texas Instruments 2002
|                 All rights reserved.
|
+------------------------------------------------------------------------------
| Purpose:     Definitions for the IDLE entity.
| $Identity:$
+------------------------------------------------------------------------------
*/

#ifndef IDLE_H
#define IDLE_H

/*==== INCLUDES ==============================================================*/

/*==== CONSTS ================================================================*/

#ifdef VSI_CALLER
 #undef VSI_CALLER
 #define VSI_CALLER        idle_handle,
 #define VSI_CALLER_SINGLE idle_handle
#endif

#define hCommTST          idle_hCommTST   /* Communication handle to TST       */

#define IDLE_REQ   0x00000010
#define IDLE_CNF   0x00010010


#ifndef __T_IDLE_CNF__
#define __T_IDLE_CNF__
typedef struct
{
  U8                        dummy;                       /*<  0:  1>                              */
} T_IDLE_CNF;
#endif

#ifndef __T_IDLE_REQ__
#define __T_IDLE_REQ__
typedef struct
{
  U8                        dummy;                       /*<  0:  1>                              */
} T_IDLE_REQ;
#endif

/*==== TYPES =================================================================*/

/*==== EXPORTS ===============================================================*/

#ifdef IDLE_PEI_C

/* Communication handles */
T_HANDLE                 idle_handle;
T_HANDLE                 hCommTST = VSI_ERROR;

#else /* IDLE_PEI_C */

extern T_HANDLE          idle_handle;
extern T_HANDLE          hCommTST;

#endif /* IDLE_PEI_C */

#endif /* IDLE_H */

/*==== END OF FILE ===========================================================*/