FreeCalypso > hg > fc-magnetite
view src/gpf3/ccd/ccd_elem.c @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sat, 04 Jan 2020 19:27:41 +0000 |
| parents | c41a534f33c6 |
| children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : | Modul : ccd_elem.c +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Condat Conder Decoder - | Definition of encoding and decoding functions of | information elements of air interface messages +----------------------------------------------------------------------------- */ #define CCD_ELEM_C #include <stdio.h> #include <string.h> #include "typedefs.h" #include "ccd_globs.h" #include "ccd.h" #include "ccdtable.h" #include "ccddata.h" #include "ccdapi.h" #include "bitfun.h" #ifndef RUN_INT_RAM /* +--------------------------------------------------------------------+ | PROJECT : CCD (6144) MODULE : ccd_elem | | STATE : code ROUTINE : ccd_decodeElem | +--------------------------------------------------------------------+ PARAMETERS: ULONG ccdid - Enumeration of the information element to be decoded in the file ccdid.h. This number is also the reference number of the IE in the melem table. USHORT l_buf - Number of bits in the encoded IE. USHORT o_buf - Offset of the bitstream buffer in bits. U8 *buf - Bitstream buffer of the encoded IE. U8 *eStruct - reference to the C-Structure containing the C-Representation of the decoded IE. PURPOSE: decodes a bitstream containing an encoded information element. The results are written to a corresponding C-Structure, the C-Representation of the IE. */ int CCDDATA_PREF(ccd_decodeElem) (ULONG ccdid, USHORT l_buf, USHORT o_buf, UCHAR* buf, UCHAR* eStruct) { int jmp_ret; USHORT mcompRef; T_CCD_Globs *globs; T_CCD_ERR_LIST_HEAD* eentry; T_CCD_STORE_LIST* stoentry; globs = ccd_GetGlobVars (&eentry, &stoentry); #ifdef DEBUG_CCD ccd_dump_msg(l_buf, o_buf, buf, globs); #endif /* * setup the structure-buffer. */ globs->pstruct = eStruct; globs->pstructOffs = 0; ccd_common_decode_init(l_buf, o_buf, buf, globs); ccd_err_reset (eentry); globs->ccd_recurs_level =1; if ((mcompRef = melem[ccdid].elemRef) EQ NO_REF) { ccd_recordFault (globs, ERR_INVALID_CCDID, BREAK, ccdid, NULL); ccd_FreeGlobVars (globs); ccd_err_free (eentry); return (BYTE)globs->CCD_Error; } #ifdef DEBUG_CCD #ifdef CCD_SYMBOLS TRACE_CCD (globs, "CCD decode: Element = %s", mcomp[mcompRef].name); #else TRACE_CCD (globs, "CCD decode: CCD_Id = %x", ccdid); #endif #endif #ifdef ERR_TRC_STK_CCD /* save the value for tracing in error case */ globs->error_stack[0] = mcompRef; #endif /* ERR_TRC_STK_CCD */ /* * Clean up the entite C-structure before decoding. * Do not overwrite the MsgId (1. Byte) */ #ifdef DEBUG_CCD TRACE_CCD (globs, "CCD Cleaning struct %ld bytes", mcomp[mcompRef].cSize); #endif memset ((UBYTE *) globs->pstruct, 0, (size_t)(mcomp[mcompRef].cSize)); /* * clear the UPN stack */ globs->SP=0; globs->StackOvfl=FALSE; globs->KeepReg[0] = 0; /* * inform the GSM-CODEC about the begin of a new message */ cdc_GSM_start (globs); jmp_ret = setjmp (globs->jmp_mark); if (jmp_ret EQ 0) { globs->jmp_mark_set = TRUE; ccd_decodeComposition ((ULONG) mcompRef, globs); } #ifdef DEBUG_CCD TRACE_CCD (globs, "CCD-ERROR = %d", globs->CCD_Error); TRACE_CCD (globs, "-------------------------------------------------"); #endif /* DEBUG_CCD */ ccd_FreeGlobVars (globs); ccd_err_free (eentry); return (BYTE) globs->CCD_Error; } #endif /* !RUN_INT_RAM */ #ifndef RUN_INT_RAM /* +--------------------------------------------------------------------+ | PROJECT : CCD (6144) MODULE : ccd_elem | | STATE : code ROUTINE : ccd_encodeElem | +--------------------------------------------------------------------+ PARAMETERS: ULONG ccdid - Enumeration of the information element to be encoded in the file ccdid.h. This number is also the reference number of the IE in the melem table USHORT l_buf - Number of bits in the encoded IE. USHORT o_buf - Offset of the bitstream buffer in bits. U8 *buf - Bitstream buffer of the encoded IE. UBYTE * eStruct - reference to the C-Structure containing the C-Representation of the decoded IE. PURPOSE: encodes a C-Structure containing the C-Representation of an information element to a bitstream. */ int CCDDATA_PREF(ccd_encodeElem) (ULONG ccdid, USHORT* l_buf, USHORT o_buf, UCHAR* buf, UCHAR* eStruct) { int jmp_ret; USHORT maxBytes, mcompRef; T_CCD_Globs *globs; T_CCD_ERR_LIST_HEAD* eentry; T_CCD_STORE_LIST* stoentry; globs = ccd_GetGlobVars (&eentry, &stoentry); ccd_err_reset (eentry); #ifdef DEBUG_CCD { /* to avoid the vsprintf if the traces won't appear anyhow */ ULONG mask; if (vsi_gettracemask (globs->me, globs->me, &mask) != VSI_ERROR) { globs->TraceIt = mask & TC_CCD; } } #endif /* * Set a sign that no call to setjmp() is done. So ccd_setError * performs no longjmp in case of an error. */ globs->jmp_mark_set = FALSE; /* Setup the bitbuffer. */ globs->bitbuf = buf; globs->bitpos = 0; /* Setup the structure-buffer. */ globs->pstruct = eStruct; globs->pstructOffs = 0; /* Cleanup the read-caches. */ globs->lastbytepos16 = globs->lastbytepos32 = 0xffff; /* Setup the bitoffset. */ globs->bitoffs = o_buf; bf_incBitpos (o_buf, globs); globs->bitbuf[globs->bytepos] = 0; globs->CCD_Error = ccdOK; globs->ccd_recurs_level =1; if ((mcompRef = melem[ccdid].elemRef) EQ NO_REF) { ccd_recordFault (globs, ERR_INVALID_CCDID, BREAK, ccdid, NULL); ccd_FreeGlobVars (globs); ccd_err_free (eentry); return (BYTE)globs->CCD_Error; } #ifdef DEBUG_CCD #ifdef CCD_SYMBOLS TRACE_CCD (globs, "CCD encode: Element = %s", mcomp[mcompRef].name); #else TRACE_CCD (globs, "CCD encode: CCD_Id = %x", ccdid); #endif #endif #ifdef ERR_TRC_STK_CCD /* Save the value for tracing in error case. */ globs->error_stack[0] = mcompRef; #endif maxBytes = (USHORT) (mcomp[mcompRef].bSize+7)>>3; #ifdef DEBUG_CCD TRACE_CCD (globs, "-------------------------------------------------"); TRACE_CCD (globs, "CCD: Code Elem"); TRACE_CCD (globs, "Cleaning %d bits (%d bytes) of the bitstream", mcomp[mcompRef].bSize, maxBytes); #endif /* * Clean up the bit buffer for the encoded message before encoding. */ memset ((U8 *) &buf[o_buf>>3], 0, (size_t) maxBytes); /* Store the length of ereased buffer to support error handling. */ globs->buflen = (USHORT) mcomp[mcompRef].bSize; /* * Clear the UPN stack. */ globs->SP=0; globs->StackOvfl=FALSE; globs->KeepReg[0] = 0; /* * Inform the GSM-CODEC about the begin of a new message. */ cdc_GSM_start (globs); jmp_ret = setjmp (globs->jmp_mark); if (jmp_ret EQ 0) { globs->jmp_mark_set = TRUE; ccd_encodeComposition ((ULONG) mcompRef, globs); } *l_buf = (USHORT)(globs->bitpos - globs->bitoffs); #ifdef DEBUG_CCD { int i, j, buflen; char s[64], c[4]; buflen = (*l_buf + o_buf + 7) >> 3; TRACE_CCD (globs, "-------------------------------------------------"); TRACE_CCD (globs, " After ENCODING: lbuf= %d, obuf= %d", *l_buf, o_buf); TRACE_CCD (globs, " Hex dump of encoded message:"); s[0] = '\0'; for (i = o_buf >> 3; i < buflen; i+=16) { for (j = 0; j < 16; j++) { if ((i+j) < buflen) { sprintf(c, " %02x", buf[i+j]); strcat (s, c); } } TRACE_CCD (globs, "%s", s); s[0] = '\0'; } } #endif #ifdef DEBUG_CCD TRACE_CCD (globs, "CCD-ERROR = %d", globs->CCD_Error); TRACE_CCD (globs, "-------------------------------------------------"); #endif /* DEBUG_CCD */ ccd_FreeGlobVars (globs); ccd_err_free (eentry); return (BYTE) globs->CCD_Error; } #endif /* !RUN_INT_RAM */
