view src/gpf3/ccd/csn1_sh.c @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents c41a534f33c6
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  
|  Modul   : csn1_sh.c
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definition of encoding and decoding functions for CSN1_SH elements 
+----------------------------------------------------------------------------- 
*/ 


/*
 * standard definitions like GLOBAL, UCHAR, ERROR etc.
 */
#include "typedefs.h"
#include "header.h"

/*
 * Prototypes of ccd (USE_DRIVER EQ undef) for prototypes only
 * look at ccdapi.h
 */
#undef USE_DRIVER
#include "ccdapi.h"

/*
 * Types and functions for bit access and manipulation
 */
#include "ccd_globs.h"
#include "bitfun.h"

/*
 * Prototypes of ccd internal functions
 */
#include "ccd.h"

/*
 * Declaration of coder/decoder tables
 */
#include "ccdtable.h"
#include "ccddata.h"


extern SHORT cdc_csn1_sx_decode (int flag, const ULONG e_ref, T_CCD_Globs *globs);
extern SHORT cdc_csn1_sx_encode (int flag, const ULONG e_ref, T_CCD_Globs *globs);

#ifndef RUN_FLASH
/*
+--------------------------------------------------------------------+
| PROJECT : CCD (6144)               MODULE  : CDC_GSM               |
| STATE   : code                     ROUTINE : cdc_csn1_shl_decode   |
+--------------------------------------------------------------------+

  PURPOSE : Decoding of the GSM Type CSN1 SHL element. This element
            consists of a 1 bit valid flag and a value part.
            Only if the valid bit is equal H the value part follows.

*/

SHORT cdc_csn1_shl_decode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs)
{

#ifdef DEBUG_CCD
  #ifndef CCD_SYMBOLS
  TRACE_CCD (globs, "cdc_csn1_shl_decode()");
	#else
	TRACE_CCD (globs, "cdc_csn1_shl_decode() %s", ccddata_get_alias((USHORT) e_ref, 1));  
	#endif
#endif

  return cdc_csn1_sx_decode (0xFF, e_ref, globs);
}
#endif /* !RUN_FLASH */

#ifndef RUN_FLASH
/*
+--------------------------------------------------------------------+
| PROJECT : CCD (6144)              MODULE  : CDC_GSM                |
| STATE   : code                    ROUTINE : cdc_csn1_shl_encode    |
+--------------------------------------------------------------------+

  PURPOSE : Encoding of the GSM Type CSN1 SHL element. This element
            consists of a 1 bit valid flag and a value part. If the
            element is valid (the v_xxx components is TRUE in the
            decoded message) a H bit will be coded followed by the
            coding of the value part. Otherwise a L bit will be
            coded.

*/

SHORT cdc_csn1_shl_encode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs)
{
#ifdef DEBUG_CCD
  #ifndef CCD_SYMBOLS
  TRACE_CCD (globs, "cdc_csn1_shl_encode()");
	#else
	TRACE_CCD (globs, "cdc_csn1_shl_encode() %s", ccddata_get_alias((USHORT) e_ref, 1));  
	#endif
#endif

  return cdc_csn1_sx_encode (0xFF, e_ref, globs);
}
#endif /* !RUN_FLASH */