view src/gpf3/ccd/gsm1_asn.c @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents c41a534f33c6
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  
|  Modul   : gsm1_asn.c
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definition of encoding and decoding functions for GSM1_ASN elements 
+----------------------------------------------------------------------------- 
*/ 


/*
 * standard definitions like GLOBAL, UCHAR, ERROR etc.
 */
#include "typedefs.h"
#include "header.h"

/*
 * Prototypes of ccd (USE_DRIVER EQ undef) for prototypes only
 * look at ccdapi.h
 */
#undef USE_DRIVER
#include "ccdapi.h"

/*
 * Types and functions for bit access and manipulation
 */
#include "ccd_globs.h"
#include "bitfun.h"

/*
 * Prototypes of ccd internal functions
 */
#include "ccd.h"

/*
 * Declaration of coder/decoder tables
 */
#include "ccdtable.h"
#include "ccddata.h"


#ifndef RUN_INT_RAM
/*
+--------------------------------------------------------------------+
| PROJECT : CCD (6144)                 MODULE  : CDC_GSM             |
| STATE   : code                       ROUTINE : cdc_gsm1asn_decode  |
+--------------------------------------------------------------------+

  PURPOSE : Decoding of the GSM Type ASN1 element. This element
            consists of a 8 bit T component a
            8 Bit L component and a V component wich
            length depends on the value of the L component. The value
            of L may be coded fix as 0x80. In this case a end of 
            content tag must follow the V component to identify the
            end of this element (implicit length)

*/

SHORT cdc_gsm1asn_decode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs)
{
  T_TLV_SORT tlv_inf;
  
  tlv_inf.gotTag = TRUE;
  tlv_inf.gotLen = TRUE;
  
#ifdef DEBUG_CCD
  #ifndef CCD_SYMBOLS
  TRACE_CCD (globs, "cdc_gsm1asn_decode()");
  #else
  TRACE_CCD (globs, "cdc_gsm1asn_decode() %s", ccddata_get_alias((USHORT) e_ref, 1));
  #endif
#endif
  
  return cdc_tlv_decode (c_ref, e_ref, &tlv_inf, globs);
}
#endif /* !RUN_INT_RAM */

#ifndef RUN_INT_RAM
/*
+--------------------------------------------------------------------+
| PROJECT : CCD (6144)                 MODULE  : CDC_GSM             |
| STATE   : code                       ROUTINE : cdc_gsm1asn_encode  |
+--------------------------------------------------------------------+

  PURPOSE : Encoding of the GSM Type ASN1 element. This element
            consists of a 8 bit T component a
            8 Bit L component and a V component wich
            length depends on the value of the L component. The value
            of L may be coded fix as 0x80. In this case a end of 
            content tag must follow the V component to identify the
            end of this element (implicit length)

*/

SHORT cdc_gsm1asn_encode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs)
{
#ifdef DEBUG_CCD
  #ifndef CCD_SYMBOLS
  TRACE_CCD (globs, "cdc_gsm1asn_encode()");
  #else
  TRACE_CCD (globs, "cdc_gsm1asn_encode() %s", ccddata_get_alias((USHORT) e_ref, 1));
  #endif
#endif
  
  cdc_tlv_encode (e_ref, 8, 8, globs);

  return 1;
}
#endif /* !RUN_INT_RAM */