FreeCalypso > hg > fc-magnetite
view src/gpf3/ccd/hl_flag.c @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | c41a534f33c6 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : | Modul : hl_flag.c +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Inc. | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Definition of encoding and decoding functions for HL_FLAG elements +----------------------------------------------------------------------------- */ /* * standard definitions like GLOBAL, UCHAR, ERROR etc. */ #include "typedefs.h" #include "header.h" /* * Prototypes of ccd (USE_DRIVER EQ undef) for prototypes only * look at ccdapi.h */ #undef USE_DRIVER #include "ccdapi.h" /* * Types and functions for bit access and manipulation */ #include "ccd_globs.h" #include "bitfun.h" /* * Prototypes of ccd internal functions */ #include "ccd.h" /* * Declaration of coder/decoder tables */ #include "ccdtable.h" #include "ccddata.h" #ifndef RUN_INT_RAM /* +--------------------------------------------------------------------+ | PROJECT : CCD (6144) MODULE : CDC_GSM | | STATE : code ROUTINE : cdc_hl_flag_decode | +--------------------------------------------------------------------+ PURPOSE : Decoding of the GSM Type HL_FLAG element. This element consists of a single bit only. The decoded value will be 0 if the encoded value is L respectively 1 if the encoded value is H. */ SHORT cdc_hl_flag_decode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs) { ULONG repeat, max_rep; BOOL is_variable = FALSE; ULONG cix_ref, num_prolog_steps, prolog_step_ref; #ifdef DEBUG_CCD #ifndef CCD_SYMBOLS TRACE_CCD (globs, "cdc_hl_flag_decode()"); #else TRACE_CCD (globs, "cdc_hl_flag_decode() %s", ccddata_get_alias((USHORT) e_ref, 1)); #endif #endif globs->SeekTLVExt = FALSE; cix_ref = melem[e_ref].calcIdxRef; num_prolog_steps = calcidx[cix_ref].numPrologSteps; prolog_step_ref = calcidx[cix_ref].prologStepRef; repeat = 1; if (cix_ref != 0) { /* * if this element is conditional, check the condition */ if (calcidx[cix_ref].numCondCalcs NEQ 0 AND ! ccd_conditionOK (e_ref, globs)) return 1; /* * if this element have a defined Prolog * we have to process it before decoding the bitstream */ if (num_prolog_steps) { ccd_performOperations (num_prolog_steps, prolog_step_ref, globs); } if (melem[e_ref].repType NEQ ' ') { is_variable = ccd_calculateRep (e_ref, &repeat, &max_rep, globs); } } /* * Element is not a SPARE. Setup the struct pointer */ globs->pstructOffs = melem[e_ref].structOffs; if (melem[e_ref].optional) { /* * for optional elements we must set the valid-flag * ??. * Therefore we store the address of the valid flag. */ *(globs->pstruct + globs->pstructOffs++) = TRUE; } globs->pstruct[globs->pstructOffs++] = (UBYTE) (bf_readBit(globs) == GET_HL_PREV(1)); #ifdef DEBUG_CCD #ifdef CCD_SYMBOLS TRACE_CCD (globs, "decoding var %s",ccddata_get_alias((USHORT) e_ref, 1)); #else TRACE_CCD (globs, "decoding var %d", melem[e_ref].elemRef); #endif #endif return 1; } #endif /* !RUN_INT_RAM */ #ifndef RUN_INT_RAM /* +--------------------------------------------------------------------+ | PROJECT : CCD (6144) MODULE : CDC_GSM | | STATE : code ROUTINE : cdc_hl_flag_encode | +--------------------------------------------------------------------+ PURPOSE : Encoding of the GSM Type HL_FLAG element. This element consists of a single bit only. If the element is set to 1 a H bit will be coded. Otherwise a L bit will be coded if the element value to encode is set to 0. */ SHORT cdc_hl_flag_encode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs) { ULONG repeat=1, amount=1; USHORT cSize = 0, startOffset; ULONG i; ULONG cix_ref, num_prolog_steps, prolog_step_ref; #ifdef DEBUG_CCD #ifndef CCD_SYMBOLS TRACE_CCD (globs, "cdc_hl_flag_encode()"); #else TRACE_CCD (globs, "cdc_hl_flag_encode() %s", ccddata_get_alias((USHORT) e_ref, 1)); #endif #endif cix_ref = melem[e_ref].calcIdxRef; num_prolog_steps = calcidx[cix_ref].numPrologSteps; prolog_step_ref = calcidx[cix_ref].prologStepRef; if (cix_ref != 0) { /* * if this element is conditional, check the condition */ if (calcidx[cix_ref].numCondCalcs NEQ 0 AND ! ccd_conditionOK (e_ref, globs)) return 1; /* * if this element have a defined Prolog * we have to process it before decoding the bitstream */ if (num_prolog_steps) { ccd_performOperations (num_prolog_steps, prolog_step_ref, globs); } } if (melem[e_ref].elemType NEQ 'S') { /* * Element is not a SPARE. * Setup the offset into the C-structure for this element */ globs->pstructOffs = melem[e_ref].structOffs; if (melem[e_ref].optional) { /* * for optional elements check the valid-flag in the C-struct. * Spare elements does not have a corresponding valid flag. */ if (globs->pstruct[globs->pstructOffs++] == FALSE) { /* * element is invalid so we must code a 0 bit */ bf_writeBit (GET_HL(0), globs); return 1; } else { #ifdef DEBUG_CCD if (globs->pstruct [melem[e_ref].structOffs] != TRUE) { TRACE_CCD (globs, "Ambiguous value for valid flag!\n...assumed 1 for ccdID=%d", e_ref); } #endif /* * element is valid so we must code a 1 bit */ bf_writeBit (GET_HL(1), globs); } } if (melem[e_ref].repType NEQ ' ') { /* As a default amount =1 due to initialization. */ if (melem[e_ref].repType EQ 'i') { /* * for variable repeatable elements read the amount * of repeats out of the C-Structure (c_xxx). * If the number of repeats given by the C-Structure * exceeds the allowed value CCD gives a warning! */ if (melem[e_ref].maxRepeat > 255) { ULONG count = (ULONG) (* (USHORT *)(globs->pstruct + globs->pstructOffs++)); repeat = MINIMUM (count, (ULONG) melem[e_ref].maxRepeat); if (repeat < count) ccd_recordFault (globs, ERR_MAX_REPEAT, CONTINUE, (USHORT) e_ref, globs->pstruct + globs->pstructOffs); } else { repeat = (ULONG) MINIMUM (globs->pstruct[globs->pstructOffs], melem[e_ref].maxRepeat); if ( repeat < (ULONG)(globs->pstruct[globs->pstructOffs]) ) ccd_recordFault (globs, ERR_MAX_REPEAT, CONTINUE, (USHORT) e_ref, globs->pstruct + globs->pstructOffs); } globs->pstructOffs++; } else if (melem[e_ref].repType EQ 'v') { /* * for variable repeatable elements read the amount * of repeats out of the C-Structure (c_xxx). * If the number of repetitions given by the C-Structure * exceeds the allowed value (maxRepeat) CCD gives a warning! */ if (melem[e_ref].maxRepeat > 255) { ULONG count = (ULONG) (* (USHORT *)(globs->pstruct + globs->pstructOffs++)); amount = MINIMUM (count, (ULONG) melem[e_ref].maxRepeat); if (amount < count) ccd_recordFault (globs, ERR_MAX_REPEAT, CONTINUE, (USHORT) e_ref, globs->pstruct + globs->pstructOffs); } else { amount = (ULONG) MINIMUM (globs->pstruct[globs->pstructOffs], melem[e_ref].maxRepeat); if ( amount < (ULONG) (globs->pstruct[globs->pstructOffs]) ) ccd_recordFault (globs, ERR_MAX_REPEAT, CONTINUE, (USHORT) e_ref, globs->pstruct + globs->pstructOffs); } globs->pstructOffs++; } else if (melem[e_ref].repType EQ 'c') { amount = (ULONG) melem[e_ref].maxRepeat; } if (melem[e_ref].repType EQ 'v' OR melem[e_ref].repType EQ 'i') { cSize = (USHORT)(((melem[e_ref].elemType EQ 'V') ? mvar[melem[e_ref].elemRef].cSize : mcomp[melem[e_ref].elemRef].cSize )); startOffset = (USHORT) globs->pstructOffs; } } for (i=0; i < repeat; i++) { if (cSize) { /* * calculate the offset if it is an array */ globs->pstructOffs = (USHORT)(startOffset + (i * cSize)); } /* * encode the value */ if (globs->pstruct[globs->pstructOffs++] EQ FALSE) { /* * element is 0 so we must signalize L */ bf_writeBit (GET_HL(0), globs); } else { /* * element is 1 so we must signalize H */ bf_writeBit (GET_HL(1), globs); } globs->pstructOffs += mvar[melem[e_ref].elemRef].cSize; } if (melem[e_ref].repType EQ 'i') { /* * for variable CNS1 fields we code a 0 flag to mark the end of the * arrays */ bf_writeBit (GET_HL(0), globs); } } return 1; } #endif /* !RUN_INT_RAM */