FreeCalypso > hg > fc-magnetite
view src/gpf3/frame/vsi_pro.c @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | c41a534f33c6 |
children |
line wrap: on
line source
/* +------------------------------------------------------------------------------ | File: vsi_pro.c +------------------------------------------------------------------------------ | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This Module defines the virtual system interface part | about the processes +----------------------------------------------------------------------------- */ #ifndef __VSI_PRO_C__ #define __VSI_PRO_C__ #endif /*==== INCLUDES ===================================================*/ #include "string.h" #include "typedefs.h" #include "os.h" #include "vsi.h" #include "frm_defs.h" #include "frm_types.h" #include "frm_glob.h" #include "frame.h" #include "route.h" /*==== TYPES ======================================================*/ /*==== CONSTANTS ==================================================*/ /*==== EXTERNALS ==================================================*/ /* -------------- S H A R E D - BEGIN ---------------- */ #ifdef _TOOLS_ #pragma data_seg("FRAME_SHARED") #endif extern void pf_TaskEntry(T_HANDLE, ULONG); /*==== VARIABLES ==================================================*/ #ifdef _TOOLS_ #pragma data_seg() #endif /* -------------- S H A R E D - END ---------------- */ /*==== FUNCTIONS ==================================================*/ #ifndef RUN_INT_RAM /* +--------------------------------------------------------------------+ | PROJECT : GSM-Frame (8415) MODULE : VSI_PRO | | STATE : code ROUTINE : vsi_p_create | +--------------------------------------------------------------------+ PURPOSE : creates a process */ T_HANDLE vsi_p_create (T_HANDLE Caller, SHORT (*pei_create)(T_PEI_INFO const ** info), void (*TaskEntry)(T_HANDLE, ULONG), T_HANDLE MemPoolHandle ) { void (*EntryFunc)(T_HANDLE, ULONG); T_PEI_INFO const *Info; T_HANDLE TaskHandle; if ( pei_create ( &Info ) == PEI_OK ) { if ( TaskEntry == NULL ) EntryFunc = pf_TaskEntry; else EntryFunc = TaskEntry; if ( os_CreateTask (NO_TASK, (char*)Info->Name, EntryFunc, Info->StackSize, Info->Priority, &TaskHandle, MemPoolHandle) == OS_OK ) { pf_TaskTable[TaskHandle].Flags = Info->Flags; pf_TaskTable[TaskHandle].PeiTable = &Info->PeiTable; pf_TaskTable[TaskHandle].QueueEntries = Info->QueueEntries; pf_TaskTable[TaskHandle].NumOfTimers = Info->NumOfTimers; strncpy (pf_TaskTable[TaskHandle].Name, Info->Name, RESOURCE_NAMELEN); pf_TaskTable[TaskHandle].Name[RESOURCE_NAMELEN-1] = 0; pf_TaskTable[TaskHandle].TaskHandle = TaskHandle; pf_TaskTable[TaskHandle].MemPoolHandle = MemPoolHandle; return TaskHandle; } } return VSI_ERROR; } #endif #ifndef RUN_INT_RAM /* +--------------------------------------------------------------------+ | PROJECT : GSM-Frame (8415) MODULE : VSI_PRO | | STATE : code ROUTINE : vsi_p_exit | +--------------------------------------------------------------------+ PURPOSE : exits and deletes a process */ #undef VSI_CALLER #define VSI_CALLER Caller, #define VSI_CALLER_SINGLE Caller int vsi_p_exit (T_HANDLE Caller, T_HANDLE TaskHandle) { ULONG old_mask; T_PRIM_HEADER *prim; T_S_HEADER *s_hdr; ULONG size; char name[RESOURCE_NAMELEN]; size = S_ALLOC_SIZE(strlen(SYSPRIM_EXIT_TOKEN)); #ifdef MEMORY_SUPERVISION prim = (T_PRIM_HEADER*)vsi_c_new ( Caller, size, 0, __FILE__, __LINE__ ); #else prim = (T_PRIM_HEADER*)vsi_c_new ( Caller, size, 0 ); #endif prim->opc = SYS_MASK; prim->sh_offset = S_HDR_OFFSET(size - sizeof(T_S_HEADER)); prim->len = strlen(SYSPRIM_EXIT_TOKEN) + sizeof(T_PRIM_HEADER); s_hdr = (T_S_HEADER*)((ULONG*)prim + prim->sh_offset); s_hdr->snd[0] =(char)Caller; strcpy((char*)P2D(prim),SYSPRIM_EXIT_TOKEN); if (vsi_gettaskname(Caller,TaskHandle,name) < VSI_OK) { return VSI_ERROR; } /* switch off tracing for Caller */ vsi_gettracemask ( Caller, Caller, &old_mask); vsi_settracemask ( Caller, Caller, 0); PSEND(vsi_c_open(Caller,name),P2D(prim)); /* set tracing to old value for Caller */ vsi_settracemask ( Caller, Caller, old_mask); return VSI_OK; } #endif #ifndef RUN_INT_RAM /* +--------------------------------------------------------------------+ | PROJECT : GSM-Frame (8415) MODULE : VSI_PRO | | STATE : code ROUTINE : vsi_p_delete | +--------------------------------------------------------------------+ PURPOSE : deletes a process */ int vsi_p_delete (T_HANDLE Caller, T_HANDLE TaskHandle) { rt_RoutingModify ( TaskHandle, (char*)SYSPRIM_REDIRECT_TOKEN, (char*)SYSPRIM_CLEAR_TOKEN ); if ( os_DestroyQueue ( Caller, pf_TaskTable[TaskHandle].QueueHandle ) != OS_OK ) return VSI_ERROR; memset ( &pf_TaskTable[TaskHandle], 0, sizeof (T_FRM_TASK_TABLE_ENTRY) ); if ( os_DestroyTask ( Caller, TaskHandle ) != OS_OK ) return VSI_ERROR; return VSI_OK; } #endif #ifndef RUN_INT_RAM /* +--------------------------------------------------------------------+ | PROJECT : GSM-Frame (8415) MODULE : VSI_PRO | | STATE : code ROUTINE : vsi_p_start | +--------------------------------------------------------------------+ PURPOSE : starts a process */ int vsi_p_start (T_HANDLE Caller, T_HANDLE TaskHandle) { if ( os_StartTask ( Caller, TaskHandle, 0 ) == OS_OK ) return VSI_OK; else return VSI_ERROR; } #endif #ifndef RUN_INT_RAM /* +--------------------------------------------------------------------+ | PROJECT : GSM-Frame (8415) MODULE : VSI_PRO | | STATE : code ROUTINE : vsi_p_stop | +--------------------------------------------------------------------+ PURPOSE : stops a process */ int vsi_p_stop (T_HANDLE Caller, T_HANDLE TaskHandle) { if ( os_StopTask ( Caller, TaskHandle ) == OS_OK ) return VSI_OK; else return VSI_ERROR; } #endif #ifndef RUN_INT_RAM /* +--------------------------------------------------------------------+ | PROJECT : GSM-Frame (8415) MODULE : VSI_PRO | | STATE : code ROUTINE : vsi_p_name | +--------------------------------------------------------------------+ PURPOSE : reads the name of a task */ int vsi_p_name (T_HANDLE Caller, T_HANDLE Handle, char *Name) { if ( os_GetTaskName ( Caller, Handle, Name ) != OS_ERROR ) return VSI_OK; return VSI_ERROR; } #endif #ifndef RUN_INT_RAM /* +--------------------------------------------------------------------+ | PROJECT : GSM-Frame (8415) MODULE : VSI_PRO | | STATE : code ROUTINE : vsi_p_handle | +--------------------------------------------------------------------+ PURPOSE : reads the name of a task */ T_HANDLE vsi_p_handle (T_HANDLE Caller, char *Name) { OS_HANDLE Handle; if ( os_GetTaskHandle ( Caller, Name, &Handle ) != OS_ERROR ) return Handle; return VSI_ERROR; } #endif