view src/gpf3/inc/frm_glob.h @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents c41a534f33c6
children
line wrap: on
line source

/*
+------------------------------------------------------------------------------
|  File:       frm_glob.h
+------------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas
|                 Instruments Berlin, AG
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+-----------------------------------------------------------------------------
|  Purpose :  Global frame tables
+-----------------------------------------------------------------------------
*/

#ifndef FRM_GLOB_H
#define FRM_GLOB_H

/*==== INCLUDES =============================================================*/

#include "frm_types.h"

/*==== CONSTANTS ============================================================*/


/*==== TYPES ================================================================*/

/*==== VARIABLES ================================================================*/

#ifndef CONFIG_MODULE
extern USHORT MaxEntities;
extern USHORT MaxCommunications;
extern USHORT MaxSimultaneousTimer;
extern USHORT MaxTimer;
extern USHORT MaxSemaphores;
extern USHORT NumberOfPPMPartitions;
extern ULONG  MaxPrimPartSize;
extern USHORT TextTracePartitionSize;
extern T_VOID_STRUCT *processed_prim[];
extern T_VOID_STRUCT *freed_prim[];
extern T_HANDLE e_running[];
extern T_FRM_TASK_TABLE_ENTRY pf_TaskTable[];
extern ULONG TraceMask[];		
extern char TracesAborted[];
extern char PrimAborted[];
extern char route_desclist[];
extern T_HANDLE TimerHandleField[];

#if !defined _TARGET_ && !defined _TOOLS_
extern char pcheck_active[];
#endif

 #else /* CONFIG_MODULE */

/* -------------- S H A R E D - BEGIN ---------------- */
#ifdef _TOOLS_
#pragma data_seg("FRAME_SHARED")
#endif

#ifndef DATA_INT_RAM

/* declare on pointer for each entity for ccd error handling */
struct ccd_task_table;
struct ccd_task_table* ccd_task_list[MAX_ENTITIES+1];

USHORT MaxEntities = MAX_ENTITIES;
USHORT MaxTimer    = MAX_TIMER;
#ifndef _TOOLS_
/* 
 * This way of setting the TST and RCV stacksize is chosen to keep it backwardscompatible,
 * i.e. not change the behavior if the stacksizes are not define in the configuration
 * file xxxconst.h.
 */
#ifdef TSTSND_STACK_SIZE
const USHORT TST_SndStacksize = TSTSND_STACK_SIZE;
#else
const USHORT TST_SndStacksize = 0;
#endif
#ifdef TSTRCV_STACK_SIZE
const USHORT TST_RcvStacksize = TSTRCV_STACK_SIZE;
#else
const USHORT TST_RcvStacksize = 0;
#endif

#endif /* _TOOLS_ */

T_FRM_TASK_TABLE_ENTRY pf_TaskTable  [ MAX_ENTITIES + 1 ]={0};
ULONG *Routing                       [ MAX_ENTITIES + 1 ]={0};
ULONG TraceMask                      [ MAX_ENTITIES + 1 ]={0};
char TracesAborted                   [ MAX_ENTITIES + 1 ]={0};
char PrimAborted                     [ MAX_ENTITIES + 1 ]={0};
#ifdef PRIM_AUTO_FREE
T_VOID_STRUCT *processed_prim        [ MAX_ENTITIES + 1 ]={0};
T_VOID_STRUCT *freed_prim            [ MAX_ENTITIES + 1 ]={0};
#endif 
T_HANDLE e_running                   [ MAX_ENTITIES + 1 ]={0};
char route_desclist                  [ MAX_ENTITIES + 1 ]={0};
T_DRV_TABLE_ENTRY DrvTable           [ MAX_TST_DRV + 1  ]={0};
T_HANDLE TimerHandleField            [ MAX_TIMER + 1    ]={0};

#if !defined _TARGET_ && !defined _TOOLS_
char pcheck_active                   [ MAX_ENTITIES + 1 ]={0};
#endif

#endif /* DATA_INT_RAM */

#ifdef _TOOLS_
#pragma data_seg()
#endif
/* -------------- S H A R E D - END ---------------- */

#endif /* CONFIG_MODULE */

#endif