FreeCalypso > hg > fc-magnetite
view src/gpf3/inc/nuc/os_const.h @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | c41a534f33c6 |
children |
line wrap: on
line source
/* +------------------------------------------------------------------------------ | File: os_const.h +------------------------------------------------------------------------------ | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Constants for the Nucleus OS-Layer +----------------------------------------------------------------------------- */ #ifndef OS_CONST_H #define OS_CONST_H /*==== INCLUDES =============================================================*/ /*==== CONSTS ===============================================================*/ #define PTR_OVERHEAD 8 #ifdef MEMORY_SUPERVISION #define PPM_CHKOVERHEAD 4 #define PPM_OVERHEAD (4+PPM_CHKOVERHEAD) #define PPM_IDX_OFFSET 0 #else #define PPM_CHKOVERHEAD 0 #define PPM_OVERHEAD 0 #endif #ifdef NU_DEBUG #define PT_CHKOVERHEAD 4 #else #define PT_CHKOVERHEAD 0 #endif #define PT_OVERHEAD (PTR_OVERHEAD+PPM_OVERHEAD) #define POOL_OVERHEAD 0 #define PPM_OFFSET ((PPM_OVERHEAD-PPM_CHKOVERHEAD)/sizeof(ULONG)) #define SUSPEND_ONE_TICK 1 #define TDMA_FRAME_DURATION 4.615 #define WIN32_TIMER_TICK 50 #define NO_WAIT_CHECK 0 #define WAIT_CHECK 1 #define OS_SUSPEND 0xffffffffUL /*NU_SUSPEND*/ #define OS_NO_SUSPEND 0 /*NU_NO_SUSPEND*/ #define OS_FOREVER 0xffffffffUL /*NU_SUSPEND*/ #define TIME_TO_TICK_TDMA_FRAME_MULTIPLIER 14199 #define TICK_TO_TIME_TDMA_FRAME_MULTIPLIER 302483 #define TIME_TO_TICK_10MS_MULTIPLIER 6554 #define TICK_TO_TIME_10MS_MULTIPLIER 655319 #ifdef _TARGET_ #define TIME_TO_SYSTEM_TICKS(time) (((((time)&0xffff)*os_time_to_tick_multiplier+0x8000)>>16)\ +(((time)>>16)*os_time_to_tick_multiplier)) #define SYSTEM_TICKS_TO_TIME(ticks) (((((ticks)&0xfff)*os_tick_to_time_multiplier+0x8000)>>16)\ +((((ticks)>>12)*os_tick_to_time_multiplier)>>4)) #else #define TIME_TO_SYSTEM_TICKS(Time) ((Time)/WIN32_TIMER_TICK) #define SYSTEM_TICKS_TO_TIME(Ticks) ((Ticks)*WIN32_TIMER_TICK) #endif #define OS_QUEUE_ENTRY_SIZE(E) (((E)*(sizeof(OS_QDATA)+sizeof(void*)) + (OS_MAX_PRIORITY * (((E)+1)*sizeof(void*))))) #define POOL_SIZE(n,s) ((n*(s+PT_CHKOVERHEAD+PT_OVERHEAD))) /* to avoid changes in all xxxconst.h files even if they do not use events */ #ifndef MAX_EVENT_GROUPS #define MAX_EVENT_GROUPS 1 #endif /*==== TYPES =================================================================*/ /*==== EXPORTS ===============================================================*/ #endif /* OS_CONST_H */