view src/gpf3/inc/pei.h @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents c41a534f33c6
children
line wrap: on
line source

/* 
+------------------------------------------------------------------------------
|  File:       pei.h
+------------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Protocol Entity Interface exported definitions.
+----------------------------------------------------------------------------- 
*/ 


#ifndef __PEI_H__
#define __PEI_H__

/*==== INCLUDES ============================================================*/

#include <stddef.h>

/*==== CONSTANTS ===========================================================*/

#define PEI_OK         0
#define PEI_ERROR   (-1)

/*==== TYPES ===============================================================*/

typedef int    T_PEI_RETURN;
typedef char * T_PEI_CONFIG;
typedef void   T_PEI_MONITOR;

/*
 * types and macros for pei-jumptable processing
 */

#define PALLOC_TRANSITION  /* to reinsert the sdu pointer in pei_primitive */
#define NO_COPY_ROUTING    /* has to be set for frame version > 2.5.0 */

  /*
   * for definitions of jumptables
   */
typedef void   (*T_VOID_FUNC)();
typedef short  (*T_SHORT_FUNC)();

typedef struct { T_VOID_FUNC func; size_t size; size_t soff; ULONG opc; } T_FUNC;
#define MAK_FUNC_S(FUNC,OPC) { (T_VOID_FUNC)FUNC, sizeof(T_##OPC), offsetof(T_##OPC,sdu), OPC }
#define MAK_FUNC_0(FUNC,OPC) { (T_VOID_FUNC)FUNC, sizeof(T_##OPC), 0                    , OPC }
#define MAK_FUNC_N(FUNC,OPC) { (T_VOID_FUNC)FUNC, 0              , 0                    , 0   }

#define TAB_SIZE(T) (sizeof T / sizeof *T)

typedef struct
{
  SHORT (*pei_init)(T_HANDLE);
  SHORT (*pei_exit)(void);
  SHORT (*pei_primitive)(void*);
  SHORT (*pei_timeout)(USHORT);
  SHORT (*pei_signal)(ULONG,void*);
  SHORT (*pei_run)(T_HANDLE,T_HANDLE);
  SHORT (*pei_config)(char*);
  SHORT (*pei_monitor)(void**);
} T_PEI_FUNC;


typedef struct                                         
{
  char const *Name;
  T_PEI_FUNC PeiTable;
  ULONG      StackSize;
  USHORT     QueueEntries;
  USHORT     Priority;
  USHORT   	 NumOfTimers;
  U32        Flags;
} T_PEI_INFO;


#endif /* __PEI_H__ */