view src/ui3/bmi/mmiBtipsBmg.h @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents e8ddbb0837ed
children
line wrap: on
line source

#ifndef _MMIBTIPS_BMG_H_
#define _MMIBTIPS_BMG_H_

/* =========================================================
*             Texas Instruments OMAP(TM) Platform Software
*  (c) Copyright Texas Instruments, Incorporated.  All Rights Reserved.
*
*  Use of this software is controlled by the terms and conditions found
*  in the license agreement under which this software has been supplied.
* ========================================================== */
/*
 $Project name: Basic Bluetooth MMI
 $Project code:
 $Module:   Bluetooth BMG APPlication
 $File:       MmiBtipsBmg.h
 $Revision:   1.0
 $Author:   Texas Instruments
 $Date:       26/06/07

********************************************************************************

 Description:

    This module provides the BTIPS BMG APPlication functionality.

********************************************************************************
 $History: MmiBtipsBmg.h

  26/06/07 Sasken original version

 $End

*******************************************************************************/
#define BTL_BMG_MAX_PIN_LENGTH 17
#define BT_MAX_REM_DEV_NAME 	248
#define BTIPS_MAX_SERVICES_BUFFER	200	//Buffer for the AUI_EDITOR to display the services supported by a particluar paired device

#define T_MFW_BTIPS_SEARCH_CB BtipsSearchCb
typedef int (*BtipsSearchCb) (BD_ADDR);  /* MFW event handler        */

/* ====================================================== */
/*
* List Attribute
*/
/* ====================================================== */
static const MfwMnuAttr BtipsDeviceList_Attrib =
{
    &menuArea,
    MNU_LEFT| MNU_LIST_ICONS| MNU_CUR_LINE, /* centered page menu       */
    (U8)-1,                                 /* use default font         */
    NULL,                               /* with these items         */
    0,                                   /* number of items     */
    COLOUR_LIST_XX,
#ifdef FF_MMI_BTIPS_APP
    TxtBtipsApp,
#endif
    NULL,
    MNUATTRSPARE
};
//Structure to access buffer for AUI Editor
typedef struct
{

	char * edt_buf;
} T_MMI_BTIPS_SERVICES_STRUCT;

/*---------------------------------------------------------------------------
 * BondState type
 *
 *     MMI Bluetooth states for bond process
 */
typedef U8 BondState;

#define BOND_NOT_STARTED     0x00 /* No request from user*/
#define BOND_USER_REQUESTED    0x01 /* User has requested but the process is not  started*/
#define BOND_PIN_TAKEN 0x02 /*Pin was taken from user and send to peer device, no response yet  */
#define BOND_CANCELLED   0x03 /* User cancelled the request*/
#define PIN_REQUEST_RECEIVED   0x04 /* Response received from peer device for the sent PIN request*/
/* End of BondState */

/*---------------------------------------------------------------------------
 * InquiryState type
 *
 *     MMI Bluetooth states for Inquiry process
 */
typedef U8 InquiryState;

#define INQUIRY_NOT_STARTED     	0x00 /* No on-going inquiryprocess*/
#define INQUIRY_STARTED		 0x01 /*Inquiry is on-going, neither cancelled nor complete*/
#define INQUIRY_CANCELLATION_STARTED   0x02 /* User requested to cancel the inquiry*/
#define INQUIRY_CANCELLATION_COMPLETE 0x03 /*Cancellation complete*/
#define INQUIRY_COMPLETE			0x04 /*Inquiry comlpete*/
/* End of InquiryState */

#define SHOW_NO_LIST		0 // this is to keep the window alive, to pop up the pinkey window for bond
#define SHOW_PAIRED_LIST 	1
#define SHOW_SEARCH_LIST 	2
#define SHOW_NONE_EXIT 	3//Exit now

#define SERVICESMASK_NOT_EMPTY 	1
#define SERVICESMASK_EMPTY			0
typedef struct _T_MMI_Btips_Bmg_DevicesWin_data
{
	T_MMI_CONTROL	mmi_control;
	T_MFW_HND		win;
	T_MFW_HND		mfwwin;	
	T_MFW_HND		parent;
	T_MFW_HND         	kbd;
	T_MFW_HND		bondCancellationWindow;	
	SHORT          		id;

	/*Editor for Pincode request*/
	T_MFW_HND   	pinCode_editor;
	U8				pinCode[4];

	/*Create a list for displaying devices*/
	ListMenuData 		  *menu_list_data;
	T_MFW_HND            list_win;//Hanlder for the list
	U32				  listCount;
	BOOL			  listID;	//for Inquiry list = SHOW_SEARCH_LIST, for paired list = SHOW_PAIRED_LIST
	
	/*Create a list for displaying connected devices*/
	ListMenuData 		  *menu_list_connected_data;
	T_MFW_HND            list_connected_win;//Hanlder for the list
	U32				  listCountConnectedDevices;
	U32				  noConnectedDevices;
	Bmg_ConnectedDeviceList connected_deviceList[BT_MAX_DEVICE_LIST];
	//BOOL			  listID;	//for Inquiry list = SHOW_SEARCH_LIST, for paired list = SHOW_PAIRED_LIST

	/*Global Data related to BTIPS Application Statemachine*/
	BOOL			searchType;
	InquiryState		inquiryState;
	BondState 		bondState;
	U32 				noPairedDevices;
	U32 				noInquiredDevices;
	U32 				currentListIndex;
	Bmg_DeviceList	deviceList[BT_MAX_DEVICE_LIST];
BtipsSearchCb	searchCB;

}T_MMI_Btips_Bmg_DevicesWin_data;

typedef enum {
	BTIPS_BMG_PAIRED_DEVICES_INIT=0,
	BTIPS_BMG_INQUIRY_RESULT_DEVICES_INIT,
	BTIPS_BMG_BONDING_REQUEST_INIT,
	BTIPS_BMG_BONDING_REQUEST_SENT,
	BTIPS_BMG_DEVICES_LIST_WIN_DEINIT,
	BTIPS_BMG_DEVICES_EXIT_WIN,
}BTIPS_BMG_DEVICES_WIN_EVENT;

typedef enum {
	BTIPS_BMG_CONNECTED_DEVICES_EXIT_WIN=0,
}BTIPS_BMG_CONNECTED_DEVICES_WIN_EVENT;
/*********************************************************************
				BMG Editor Data for PhoneName Editor , PinCode Editor
*********************************************************************/
typedef enum {
	BTIPS_BMG_LOCAL_EDITOR_INIT=0,
	BTIPS_BMG_REMOTE_EDITOR_INIT,
	BTIPS_BMG_EDITOR_CANCEL
}BTIPS_BMG_PHONENAME_EDITOR_EVENT;

typedef struct _T_MMI_Btips_Bmg_PhoneName_Win_data
{
	T_MMI_CONTROL	mmi_control;
	T_MFW_HND		win;
	T_MFW_HND		mfwwin;	
	T_MFW_HND		parent;
	T_MFW_HND         	kbd;
	SHORT          		id;
	T_MFW_HND   	phoneName_editor;
	UBYTE 			phoneNameBuffer[BT_MAX_REM_DEV_NAME]; /* pointer of text and number */
	BOOL			local_device;	//TRUE indicates Local device and FALSE indicates Remote Device
}	T_MMI_Btips_Bmg_PhoneName_Win_data;

typedef struct _T_MMI_Btips_Bmg_PinCode_Win_data
{
	T_MMI_CONTROL	mmi_control;
	T_MFW_HND		win;
	T_MFW_HND		mfwwin;	
	T_MFW_HND		parent;
	T_MFW_HND         	kbd;
	SHORT          		id;
	T_MFW_HND   	pinCode_editor;
	UBYTE 			pinCodeBuffer[16]; /* pointer of text and number *///sundeep changed from 4
}	T_MMI_Btips_Bmg_PinCode_Win_data;
/*********************************************************************
				BMG Editor END
*********************************************************************/

T_MFW_HND mmi_btips_bmg_pinCode_editor_create(MfwHnd parent_window);
T_MFW_HND mmi_btips_bmg_devices_win_create(T_MFW_HND parent, BOOL searchType, T_MFW_BTIPS_SEARCH_CB searchCB);
T_MFW_HND mmi_btips_bmg_services_editor_create(T_MFW_HND parent_win, SdpServicesMask sdpServicesMask);
#endif