view blobs/patches/main-pirelli.patch @ 330:dd3c89e9ca2e

l1_cust.c: added function that exports the calibrated Vbat conversion for use by the new battery charging code
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 14 Dec 2017 04:10:30 +0000
parents 8dd671b7d41e
children
line wrap: on
line source

# This patch applies to the Init_Target() function in the init.obj module in
# main.lib; the present version is for making TCS211 run on the Pirelli.
# This patch sets the same memory and peripheral chip select timings and
# widths as Pirelli's fw.

[init.obj]

# value goes into nCS0, nCS1 and nCS3 config registers
.text 66 A4
# the nCS2 setting in our original blob is already correct for the Pirelli

# value goes into nCS4 config reg
.text 72 A7

# nop out the write into 0x02700000

.text 128 C0
.text 129 46