FreeCalypso > hg > fc-magnetite
view cdg-hybrid/sap/mphp.pdf @ 312:e60d7a32ae2a
doc/Modem-configs: deblobbing status update
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Fri, 03 Nov 2017 21:07:17 +0000 (2017-11-03) |
parents | e7a67accfad9 |
children |
line wrap: on
line source
;******************************************************************************** ;*** File : mphp.pdf ;*** Creation : Fri Jun 08 13:58:12 CST 2007 ;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1 ;*** Copyright : (c) Texas Instruments AG, Berlin Germany 2002 ;******************************************************************************** ;*** Document Type : Service Access Point Specification ;*** Document Name : mphp ;*** Document No. : 8441.100.03.011 ;*** Document Date : 2003-01-13 ;*** Document Status: BEING_PROCESSED ;*** Document Author: SAB ;******************************************************************************** PRAGMA SRC_FILE_TIME "Mon Nov 24 15:49:34 2003" PRAGMA LAST_MODIFIED "2003-01-13" PRAGMA ID_AND_VERSION "8441.100.03.011" CONST MAX_L2_FRAME_SIZE 23 ; CONST MAX_RELATIVE_POS 20 ; CONST MPHP_NUMC_MA 64 ; Maximum number of carriers in the mobile allocation list handled by L1. CONST MAX_USF_TABLE 8 ; CONST MAX_ALLOC_BITMAP 127 ; CONST MPHP_NUMC_BA_GPRS_SC 33 ; Maximum number of carriers in the BA(GPRS) list plus the serving cell carrier handled by L1. VALTAB VAL_psi_nr VAL 1 - 20 "specifies the relative position array" VAL 0 "read all PSI" VALTAB VAL_bs_pbcch_blks VAL 0b00 "B0 is used for PBCCH" VAL 0b01 "B0, B6 is used for PBCCH" VAL 0b10 "B0, B6, B3 is used for PBCCH" VAL 0b11 "B0, B6, B3, B9 is used for PBCCH" VALTAB VAL_psi1_rep_period VAL 1 - 16 "PSI is repeated every 'value' multiframes" VALTAB VAL_relative_pos_array VAL 0 - 64 "index" VALTAB VAL_hopping VAL 0 "static" VAL 1 "hopping" VAL 2 MPHP_INT_MEAS_STATIC "static" VAL 3 MPHP_INT_MEAS_HOPPING "hopping" VAL 4 "static" VAL 5 "hopping" VALTAB VAL_tsc VAL 0 - 7 "see 05.02, Annex A" VALTAB VAL_tn VAL 0 - 7 "timeslot number" VAL 255 "Value not present" VALTAB VAL_l2_channel VAL 1 L2_PCHANNEL_PCCCH "PCCCH block" VAL 2 L2_PCHANNEL_PBCCH "PBCCH block" VAL 3 L2_PCHANNEL_PPCH "PPCH block" VAL 4 L2_PCHANNEL_PEPCH "PEPCH block" VAL 5 L2_PCHANNEL_PACCH "PACCH block" VALTAB VAL_error_flag VAL 1 "valid block info" VAL 0 "invalid block info" VALTAB VAL_bs_pag_blks_res VAL 0 - 12 "number blocks for PAGCH, PDTCH and PACCH" VALTAB VAL_page_mode VAL 0 PAGE_NORMAL "normal paging" VAL 1 PAGE_EXT "extended paging" VAL 2 PAGE_REORG "paging reorganisation" VALTAB VAL_nb_carrier VAL 1 - 65 "_" VALTAB VAL_nmeas VAL 1 - 65 "_" VALTAB VAL_fn_offset VAL 0 - 2715647 "max. GSM frames -1" VALTAB VAL_time_alignment VAL 0 - 4999 "_" VALTAB VAL_bs_prach_blks VAL 0b0000 "No block is reserved for PRACH (default)" VAL 0b0001 "B0 is used for PRACH" VAL 0b0010 "B0, B6 is used for PRACH" VAL 0b0011 "B0, B6, B3 is used for PRACH" VAL 0b0100 "B0, B6, B3, B9 is used for PRACH" VAL 0b0101 "B0, B6, B3, B9, B1 is used for PRACH" VAL 0b0110 "B0, B6, B3, B9, B1, B7 is used for PRACH" VAL 0b0111 "B0, B6, B3, B9, B1, B7, B4 is used for PRACH" VAL 0b1000 "B0, B6, B3, B9, B1, B7, B4, B10 is used for PRACH" VAL 0b1001 "B0, B6, B3, B9, B1, B7, B4, B10, B2 is used for PRACH" VAL 0b1010 "B0, B6, B3, B9, B1, B7, B4, B10, B2, B8 is used for PRACH" VAL 0b1011 "B0, B6, B3, B9, B1, B7, B4, B10, B2, B8, B5 is used for PRACH" VAL 0b1100 "B0, B6, B3, B9, B1, B7, B4, B10, B2, B8, B5, B11 is used for PRACH" VALTAB VAL_burst_type VAL 0 ACCESS_8_BIT "" VAL 1 ACCESS_11_BIT "" VALTAB VAL_assign_cmd VAL 0 DL_ASSIGNMENT "Downlink assignment" VAL 1 UL_ASSIGNMENT "Uplink assignment" VAL 2 UL_DL_ASSIGNMENT "Uplink and downlink assignment" VALTAB VAL_m_class VAL 1 - 12 "Speech mode" VALTAB VAL_repeat_alloc VAL 0 "cancel any pending repeat allocation" VAL 1 "repeat the current fixed allocation when it ends" VALTAB VAL_purpose VAL 0 "reserved" VAL 1 "reserved" VAL 2 "reserved" VAL 3 SINGLE_BLOCK_TRANSFER_DL "todo ??? reception?" VAL 4 SINGLE_BLOCK_TRANSFER_UL "i.e. measurement report" VAL 5 TWO_PHASE_ACESS "two phases access" VALTAB VAL_ta_value VAL 0 - 63 "Speech mode" VAL 255 "value not present" VALTAB VAL_ta_index VAL 0 - 15 "_" VAL 255 "value not present" VALTAB VAL_ul_tfi VAL 0 - 127 "_" VALTAB VAL_dl_tfi VAL 0 - 31 "_" VALTAB VAL_mac_mode VAL 0 DA "Dynamic allocation" VAL 1 EDA "Extended Dynamic allocation" VAL 2 FA "Fixed allocation, not half duplex mode" VAL 3 FA_HD "Fixed allocation, half duplex mode" VALTAB VAL_usf_gran VAL 0 "the ms shall transmit one RLC/MAC-Block" VAL 1 "the ms shall transmit four consecutive RLC/MAC-Block" VALTAB VAL_dl_ctrl_ts VAL 0 - 7 "_" VALTAB VAL_size_bitmap VAL 0 - 127 "_" VALTAB VAL_tbf_start_present VAL 0 "not present" VAL 1 "present" VALTAB VAL_pc_meas_chan VAL 0 MEAS_BCCH "" VAL 1 MEAS_PDCH "" VALTAB VAL_tbf_type VAL 0 REL_DL_TBF "Release only the downlink TBF" VAL 1 REL_UL_TBF "Release only the uplink TBF" VAL 2 REL_ALL_TBF "Release both uplink and downlink TBFs" VALTAB VAL_poll_resp_type VAL 3 POLL_RESP_NB_CS1 "normal burst" VAL 7 POLL_RESP_AB_8_BIT "access burst" VAL 8 POLL_RESP_AB_11_BIT "access burst" VALTAB VAL_sb_status VAL 0 SB_STAT_OK "In uplink, indicates that the single block was sent." VAL 0 SB_STAT_DL_CRC_ERROR "In downlink, indicates that the downlink single block was received with no CRC_ERROR." VAL 1 SB_STAT_STIME_PASSED "Starting time is passed. Single block uplink/downlink was not sent/received." VAL 2 SB_STAT_TA_INVALID "No valid timing advance. Single block was not sent." VAL 3 SB_STAT_DL_OK "Valid downlink single block received ( NO CRC_ERROR)." VALTAB VAL_if_meas_enable VAL 0 MPHP_IM_DISABLED "interference measurement processing disabled" VAL 1 MPHP_IM_ENABLED "interference measurement processing enabled" VAR psi_nr "Specifies the number of PSI to read" B VAL @p_mphp - VAL_psi_nr@ VAR bs_pbcch_blks "Number of PBCCH per multiframe" B VAL @p_mphp - VAL_bs_pbcch_blks@ VAR psi1_rep_period "psi1 repeat period" B VAL @p_mphp - VAL_psi1_rep_period@ VAR relative_pos_array "relative position to B0" B VAL @p_mphp - VAL_relative_pos_array@ VAR hopping "hopping indicator" B VAL @p_mphp - VAL_hopping@ VAR arfcn "channel number" S VAR tsc "training sequence number" B VAL @p_mphp - VAL_tsc@ VAR tn "timeslot number" B VAL @p_mphp - VAL_tn@ VAR l2_channel "layer 2 channel type" B VAL @p_mphp - VAL_l2_channel@ VAR error_flag "validity of the data block" B VAL @p_mphp - VAL_error_flag@ VAR l2_frame "decoded data" B VAR relative_pos "relative position" B VAR fn "full frame number" L VAR imsi_mod "see description" S VAR split_pg_cycle "SPLIT_PG_CYCLE" S VAR bs_pag_blks_res "BS_PAG_BLKS_RES" B VAL @p_mphp - VAL_bs_pag_blks_res@ VAR page_mode "PAGE_MODE" B VAL @p_mphp - VAL_page_mode@ VAR nb_carrier "neighbour cell carrier" B VAL @p_mphp - VAL_nb_carrier@ VAR carrier_list "List of carrier" S VAR list_id "List identifier" B VAR nmeas "Number of measurements" B VAL @p_mphp - VAL_nmeas@ VAR reporting_period "Reporting period" S VAR carrier_id "Measurement Carrier Identifier" B VAR fn_offset "Frame number offset" L VAL @p_mphp - VAL_fn_offset@ VAR time_alignment "Time alignment" L VAL @p_mphp - VAL_time_alignment@ VAR txpwr "" B VAR rand "" S VAR channel_request_data "" S VAR poll_data "" B VAR bs_prach_blks "" B VAL @p_mphp - VAL_bs_prach_blks@ VAR burst_type "" B VAL @p_mphp - VAL_burst_type@ VAR assign_cmd "" B VAL @p_mphp - VAL_assign_cmd@ VAR m_class "" B VAL @p_mphp - VAL_m_class@ VAR repeat_alloc "" B VAL @p_mphp - VAL_repeat_alloc@ VAR ts_mask "" B VAR ts_override "" B VAR purpose "" B VAL @p_mphp - VAL_purpose@ VAR ta_value "" B VAL @p_mphp - VAL_ta_value@ VAR ta_index "" B VAL @p_mphp - VAL_ta_index@ VAR ul_tfi "" B VAL @p_mphp - VAL_ul_tfi@ VAR dl_tfi "" B VAL @p_mphp - VAL_dl_tfi@ VAR mac_mode "" B VAL @p_mphp - VAL_mac_mode@ VAR usf_table "" B VAR usf_gran "" B VAL @p_mphp - VAL_usf_gran@ VAR dl_ctrl_ts "" B VAL @p_mphp - VAL_dl_ctrl_ts@ VAR size_bitmap "" B VAL @p_mphp - VAL_size_bitmap@ VAR bitmap "" B VAR tbf_start_present "" B VAL @p_mphp - VAL_tbf_start_present@ VAR pb "" B VAR pc_meas_chan "" B VAL @p_mphp - VAL_pc_meas_chan@ VAR tbf_type "" B VAL @p_mphp - VAL_tbf_type@ VAR pccch_lev "" B VAR kcn "" S VAR acc_nbr "" B VAR rxlev "" B VAR poll_resp_type "" B VAL @p_mphp - VAL_poll_resp_type@ VAR acc_level "" S VAR assign_id "" B VAR p0 "" B VAR bts_pwr_ctl_mode "should be BOOL, but BOOL is not valid in SAP" B VAR pr_mode "should be BOOL, but BOOL is not valid in SAP" B VAR sb_status "" B VAL @p_mphp - VAL_sb_status@ VAR if_meas_enable "" B VAL @p_mphp - VAL_if_meas_enable@ VAR dl_error "" B VAR rx_lev "" B VAR p_rf_chan_cnt "Number of channels" S VAR bcch_carrier "BCCH Carrier" S VAR p_radio_freq "Absolute Radio Frequency Number" S COMP int_meas_rxlev "Idle Int. Meas. Level" { rx_lev [2] ; Downlink Control Timeslot } COMP p_timing_advance "" { ta_value ; timing advance value ta_index ; timing advance index tn ; timing advance timeslot number } COMP p_dl_alloc "" { dl_tfi ; Downlink TFI ts_mask ; Downlink Timeslot Allocation } COMP p_dynamic_alloc "" { usf_table [MAX_USF_TABLE] ; USF Index Table usf_gran ; USF granularity } COMP p_fixed_alloc "" { dl_ctrl_ts ; Downlink Control Timeslot size_bitmap ; Allocation Bitmap Length bitmap [MAX_ALLOC_BITMAP] ; Allocation Bitmap } COMP p_ul_alloc "" { ul_tfi ; Uplink TFI ts_mask ; Uplink Timeslot Allocation p_dynamic_alloc ; Dynamic Allocation p_fixed_alloc ; Fixed Allocation } COMP p_tbf_start "" { tbf_start_present ; Starting time present fn ; Full frame number } COMP p_ncell_meas "" { rxlev ; RX-Level } COMP p_rf_ch "" { arfcn ; Absolute RF } COMP p_chan_sel "" { hopping ; Hopping flag p_rf_ch ; Channel Selection Choice } COMP p_ch_des "" { p_chan_sel ; Channel Selection tn ; Timeslot number tsc ; Training sequence code } COMP p_dl_power "" { p0 ; P0 bts_pwr_ctl_mode ; BTS_PWR_CTL_MODE pr_mode ; PR_MODE } COMP p_rf_chan_no "Frequency list" { p_radio_freq [MPHP_NUMC_MA] ; Radio Frequency List } COMP p_freq_list "list of frequencies" { p_rf_chan_cnt ; Number of channels p_rf_chan_no ; Radio Frequency List } COMP p_frequency_par "" { p_chan_sel ; Channel Selection p_freq_list ; Mobile Allocation } ; MPHP_SCELL_PBCCH_REQ 0x021C ; MPHP_DATA_IND 0x0228 ; MPHP_SCELL_PBCCH_STOP_REQ 0x021D ; MPHP_SCELL_PBCCH_STOP_CON 0x021E ; MPHP_START_PCCCH_REQ 0x0219 ; MPHP_STOP_PCCCH_REQ 0x021A ; MPHP_STOP_PCCCH_CON 0x021B ; MPHP_CR_MEAS_REQ 0x021F ; MPHP_CR_MEAS_IND 0x0229 ; MPHP_CR_MEAS_STOP_REQ 0x0220 ; MPHP_CR_MEAS_STOP_CON 0x0221 ; MPHP_INT_MEAS_REQ 0x0222 ; MPHP_INT_MEAS_IND 0x022A ; MPHP_INT_MEAS_STOP_REQ 0x0223 ; MPHP_INT_MEAS_STOP_CON 0x0224 ; MPHP_NCELL_PBCCH_REQ 0x0225 ; MPHP_NCELL_PBCCH_IND 0x022C ; MPHP_NCELL_PBCCH_STOP_REQ 0x0226 ; MPHP_NCELL_PBCCH_STOP_CON 0x0227 ; MPHP_RA_REQ 0x0212 ; MPHP_RA_CON 0x0213 ; MPHP_RA_STOP_REQ 0x0214 ; MPHP_RA_STOP_CON 0x0215 ; MPHP_POLLING_RESPONSE_REQ 0x0216 ; MPHP_POLLING_IND 0x0217 ; MPHP_ASSIGNMENT_REQ 0x0206 ; MPHP_ASSIGNMENT_CON 0x0207 ; MPHP_REPEAT_UL_FIXED_ALLOC_REQ 0x020A ; MPHP_REPEAT_UL_FIXED_ALLOC_CON 0x020B ; MPHP_SINGLE_BLOCK_REQ 0x0201 ; MPHP_SINGLE_BLOCK_CON 0x0202 ; MPHP_STOP_SINGLE_BLOCK_REQ 0x0203 ; MPHP_STOP_SINGLE_BLOCK_CON 0x0204 ; MPHP_TBF_RELEASE_REQ 0x0208 ; MPHP_TBF_RELEASE_CON 0x0209 ; MPHP_PDCH_RELEASE_REQ 0x020C ; MPHP_PDCH_RELEASE_CON 0x020D ; MPHP_TIMING_ADVANCE_REQ 0x020E ; MPHP_TIMING_ADVANCE_CON 0x020F ; MPHP_UPDATE_PSI_PARAM_REQ 0x0210 ; MPHP_UPDATE_PSI_PARAM_CON 0x0211 ; MPHP_TCR_MEAS_REQ 0x022D ; MPHP_TCR_MEAS_IND 0x022E ; MPHP_TINT_MEAS_IND 0x022B PRIM MPHP_SCELL_PBCCH_REQ 0x021C { psi_nr ; PSI number bs_pbcch_blks ; Number of PBCCH blocks pb ; Power reduction value psi1_rep_period ; Occurrence of PSI1 relative_pos_array [MAX_RELATIVE_POS] ; Position of other PSIs p_ch_des ; Packet Channel Description p_freq_list ; Mobile allocation } PRIM MPHP_DATA_IND 0x0228 { arfcn ; Radio frequency; belongs to BCCH !! not to any GPRS channel l2_channel ; Layer2 channel error_flag ; Error flag l2_frame [MAX_L2_FRAME_SIZE] ; Decoded data relative_pos ; Relative position pccch_lev ; PCCCH_LEV fn ; Full frame number } PRIM MPHP_SCELL_PBCCH_STOP_REQ 0x021D { } PRIM MPHP_SCELL_PBCCH_STOP_CON 0x021E { } PRIM MPHP_START_PCCCH_REQ 0x0219 { imsi_mod ; IMSImod kcn ; KCN split_pg_cycle ; SPLIT_PG_CYCLE bs_pag_blks_res ; BS_PAG_BLKS_RES bs_pbcch_blks ; BS_PBCCH_BLKS pb ; Power reduction value page_mode ; Page mode p_ch_des ; Packet Channel Description p_freq_list ; Mobile allocation } PRIM MPHP_STOP_PCCCH_REQ 0x021A { } PRIM MPHP_STOP_PCCCH_CON 0x021B { } PRIM MPHP_CR_MEAS_REQ 0x021F { nb_carrier ; Number of neighbour cell carrier carrier_list [MPHP_NUMC_BA_GPRS_SC] ; List of carrier list_id ; List identifier } PRIM MPHP_CR_MEAS_IND 0x0229 { nmeas ; Number of measurements reported p_ncell_meas [MPHP_NUMC_BA_GPRS_SC] ; NCELL Measurements list_id ; List identifier reporting_period ; Reporting period } PRIM MPHP_CR_MEAS_STOP_REQ 0x0220 { } PRIM MPHP_CR_MEAS_STOP_CON 0x0221 { } PRIM MPHP_INT_MEAS_REQ 0x0222 { p_frequency_par ; Frequency parameter carrier_id ; Measurement Carrier Identifier ts_mask ; Timeslot number m_class ; Multislot class } PRIM MPHP_INT_MEAS_IND 0x022A { int_meas_rxlev [8] ; Idle Int. Meas. Level carrier_id ; Measurement carrier identifier } PRIM MPHP_INT_MEAS_STOP_REQ 0x0223 { } PRIM MPHP_INT_MEAS_STOP_CON 0x0224 { } PRIM MPHP_NCELL_PBCCH_REQ 0x0225 { bs_pbcch_blks ; Number of PBCCH blocks pb ; PB psi1_rep_period ; Occurrence of PSI1 relative_pos ; Relative position p_ch_des ; Packet Channel Description p_freq_list ; Mobile allocation list bcch_carrier ; BCCH Carrier fn_offset ; Frame number offset time_alignment ; Time alignment } PRIM MPHP_NCELL_PBCCH_IND 0x022C { arfcn ; Radio frequency l2_channel ; Layer2 channel error_flag ; Error flag l2_frame [MAX_L2_FRAME_SIZE] ; Decoded data relative_pos ; Relative position pccch_lev ; PCCCH_LEV fn ; Full frame number } PRIM MPHP_NCELL_PBCCH_STOP_REQ 0x0226 { } PRIM MPHP_NCELL_PBCCH_STOP_CON 0x0227 { } PRIM MPHP_RA_REQ 0x0212 { txpwr ; Transmit power rand ; Delay channel_request_data ; Channel request data bs_prach_blks ; BS_PRACH_BLKS burst_type ; Access burst type } PRIM MPHP_RA_CON 0x0213 { fn ; Full frame number channel_request_data ; Channel request data } PRIM MPHP_RA_STOP_REQ 0x0214 { } PRIM MPHP_RA_STOP_CON 0x0215 { } PRIM MPHP_POLLING_RESPONSE_REQ 0x0216 { poll_resp_type ; Polling Response Type poll_data [MAX_L2_FRAME_SIZE+1] ; polling request data fn ; Full frame number ta_index ; timing advance index txpwr ; Transmit power } PRIM MPHP_POLLING_IND 0x0217 { fn ; Frame number } PRIM MPHP_ASSIGNMENT_REQ 0x0206 { assign_id ; Assignment ID assign_cmd ; Assignment command m_class ; Multislot class if_meas_enable ; INTERF_MEAS_ENABLE pc_meas_chan ; PC_MEAS_CHAN burst_type ; Access burst type p_timing_advance ; Packet timing advance p_dl_power ; Downlink Power Control tsc ; Training sequence code p_frequency_par ; Frequency parameter p_tbf_start ; TBF starting time mac_mode ; MAC Mode p_dl_alloc ; Downlink resource allocation p_ul_alloc ; Uplink resource allocation } PRIM MPHP_ASSIGNMENT_CON 0x0207 { assign_id ; Assignment ID } PRIM MPHP_REPEAT_UL_FIXED_ALLOC_REQ 0x020A { repeat_alloc ; Repeat allocation ts_override ; Timeslot override p_tbf_start ; TBF starting time } PRIM MPHP_REPEAT_UL_FIXED_ALLOC_CON 0x020B { } PRIM MPHP_SINGLE_BLOCK_REQ 0x0201 { assign_id ; Assignment ID purpose ; Single Block Purpose pc_meas_chan ; PC_MEAS_CHAN burst_type ; Access burst type p_timing_advance ; Packet timing advance p_dl_power ; Downlink Power Control tsc ; Training sequence code p_frequency_par ; Frequency parameter p_tbf_start ; TBF starting time tn ; Timeslot number l2_frame [MAX_L2_FRAME_SIZE] ; Decoded data } PRIM MPHP_SINGLE_BLOCK_CON 0x0202 { assign_id ; Assignment ID purpose ; Single Block Purpose sb_status ; Single Block Status dl_error ; Downlink Error Flag l2_frame [MAX_L2_FRAME_SIZE] ; Decoded data } PRIM MPHP_STOP_SINGLE_BLOCK_REQ 0x0203 { } PRIM MPHP_STOP_SINGLE_BLOCK_CON 0x0204 { } PRIM MPHP_TBF_RELEASE_REQ 0x0208 { tbf_type ; TBF Type } PRIM MPHP_TBF_RELEASE_CON 0x0209 { tbf_type ; TBF Type } PRIM MPHP_PDCH_RELEASE_REQ 0x020C { assign_id ; Assignment ID ts_mask ; Timeslots available } PRIM MPHP_PDCH_RELEASE_CON 0x020D { assign_id ; Assignment ID } PRIM MPHP_TIMING_ADVANCE_REQ 0x020E { assign_id ; Assignment ID p_timing_advance ; Packet timing advance } PRIM MPHP_TIMING_ADVANCE_CON 0x020F { assign_id ; Assignment ID } PRIM MPHP_UPDATE_PSI_PARAM_REQ 0x0210 { pb ; Pb burst_type ; Access burst type } PRIM MPHP_UPDATE_PSI_PARAM_CON 0x0211 { } PRIM MPHP_TCR_MEAS_REQ 0x022D { nb_carrier ; Number of neighbour cell carrier carrier_list [MPHP_NUMC_BA_GPRS_SC] ; List of carrier list_id ; List identifier } PRIM MPHP_TCR_MEAS_IND 0x022E { acc_level [MPHP_NUMC_BA_GPRS_SC] ; Power strength level N-Cell acc_nbr [MPHP_NUMC_BA_GPRS_SC] ; Frequency Channel Number list_id ; List identifier } PRIM MPHP_TINT_MEAS_IND 0x022B { int_meas_rxlev [8] ; Idle Int. Meas. Level carrier_id ; Measurement carrier identifier }