FreeCalypso > hg > fc-magnetite
view cdg-hybrid/cdginc/m_mm.val @ 680:ee3ac8c617cb
armio.c: set GPIO2 output high initially
On TI-canonical platforms GPIO2 is DCD modem control output. In TI's
original code the AI_InitIOConfig() function called from Init_Target()
would configure GPIO2 as an output and set the initial output value to
low, but then the init code in uartfax.c called from Init_Serial_Flows()
would immediately change it to high, corresponding to DCD not asserted.
The result is a momentary asserted-state glitch on the DCD output.
The present change eliminates this glitch, setting DCD output to
not-asserted initially like it should be.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 25 Jun 2020 03:17:43 +0000 |
parents | e7a67accfad9 |
children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : m_mm.val | | SOURCE : "msg\mm.mdf" | | LastModified : "2006-03-22" | | IdAndVersion : "6147.602.06.106" | | SrcFileTime : "Wed Nov 28 10:19:30 2007" | | Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef M_MM_VAL #define M_MM_VAL #define CDG_ENTER__M_MM_VAL #define CDG_ENTER__FILENAME _M_MM_VAL #define CDG_ENTER__M_MM_VAL__FILE_TYPE CDGINC #define CDG_ENTER__M_MM_VAL__LAST_MODIFIED _2006_03_22 #define CDG_ENTER__M_MM_VAL__ID_AND_VERSION _6147_602_06_106 #define CDG_ENTER__M_MM_VAL__SRC_FILE_TIME _Wed_Nov_28_10_19_30_2007 #include "CDG_ENTER.h" #undef CDG_ENTER__M_MM_VAL #undef CDG_ENTER__FILENAME #include "m_rr_com.val" /* Access values independent from the corresponding h-file. */ /* * Value constants for VAL_cm_serv_type */ #define VAL_CM_SERV_TYPE___DEF (0x0) /* reserved */ #define ST_MOC (0x1) /* Mobile originating call establishment or packet mode connection establishment */ #define ST_EMERGENCY (0x2) /* Emergency call establishment */ #define ST_SMS (0x4) /* Short message service */ #define ST_SS (0x8) /* Supplementary service activation */ /* * Value constants for VAL_follow */ #define FOR_PENDING_NO (0x0) /* No follow-on request pending */ #define FOR_PENDING_YES (0x1) /* Follow-on request pending */ /* * Value constants for VAL_key_seq */ #define VAL_KEY_SEQ___7 (0x7) /* No key is available (MS to network); Reserved (network to MS) */ /* * Value constants for VAL_odd_even */ #define EVEN (0x0) /* even */ #define ODD (0x1) /* odd */ /* * Value constants for VAL_rej_cause */ #define VAL_REJ_CAUSE___DEF (0x0) /* DOWNLINK : Service option temporarily out of order UPLINK : Protocol error, unspecified */ #define RC_IMSI_IN_HLR (0x2) /* IMSI unknown in HLR */ #define RC_ILLEGAL_MS (0x3) /* Illegal MS */ #define RC_IMSI_IN_VLR (0x4) /* IMSI unknown in VLR */ #define RC_IMEI_NOT_ACCEPTED (0x5) /* IMEI not accepted */ #define RC_ILLEGAL_ME (0x6) /* Illegal ME */ #define RC_PLMN_NOT_ALLOWED (0xb) /* PLMN not allowed */ #define RC_LA_NOT_ALLOWED (0xc) /* Location Area not allowed */ #define RC_ROAMING_NOT_ALLOWED (0xd) /* National roaming not allowed in this location area */ // VAL-FF: REL99 // #define RC_NO_SUITABLE_CELL_IN_LA (0xf) /* Find another allowed location area in the same PLMN */ #define RC_NETWORK_FAILURE (0x11) /* Network failure */ #define RC_CONGETION (0x16) /* Congestion */ #define RC_SERVICE_NOT_SUPPORTED (0x20) /* Service option not supported */ #define RC_SERVICE_NOT_SUBSCRIBED (0x21) /* Requested service option not subscribed */ #define RC_SERVICE_ORDER (0x22) /* Service option temporarily out of order */ #define RC_IDENTIFIY (0x26) /* Call cannot be identified */ #define RC_INCORRECT_MESSAGE (0x5f) /* Semantically incorrect message */ #define RC_INVALID_MAND_MESSAGE (0x60) /* Invalid mandatory information */ #define RC_MESSAGE_TYPE_NOT_IMPLEM (0x61) /* Message type non-existent or not implemented */ #define RC_MESSAGE_TYPE_INCOMPAT (0x62) /* Message type not compatible with the protocol state */ #define RC_IE_NOT_IMPLEM (0x63) /* Information element non-existent or not implemented */ #define RC_CONDITIONAL_IE (0x64) /* Conditional IE error */ #define RC_MESSAGE_INCOMPAT (0x65) /* Message not compatible with the protocol state */ #define RC_UNSPECIFIED (0x6f) /* Protocol error, unspecified */ /* * Value constants for VAL_ident_type */ #define VAL_IDENT_TYPE___DEF (0x0) /* reserved */ #define ID_TYPE_NO_IDENT (0x0) /* No Identity */ #define ID_TYPE_IMSI (0x1) /* IMSI */ #define ID_TYPE_IMEI (0x2) /* IMEI */ #define ID_TYPE_IMEISV (0x3) /* IMEISV */ #define ID_TYPE_TMSI (0x4) /* TMSI */ /* * Value constants for VAL_sapi */ #define SAPI_0 (0x0) /* SAPI used for RR, MM, CC and SS */ #define SAPI_3 (0x3) /* SAPI used for SMS */ /* * Value constants for VAL_pd */ #define PD_GCC (0x0) /* Group call control */ #define PD_BCC (0x1) /* Broadcast Call Control */ #define PD_PDSS1 (0x2) /* PDSS1 */ #define PD_CC (0x3) /* Call Control, call related SS messages */ #define PD_PDSS2 (0x4) /* PDSS2 */ #define PD_MM (0x5) /* Mobility Management messages */ #define PD_RR (0x6) /* Radio Resources management messages */ #define PD_GPRS_MM (0x8) /* GPRS Mobility Management messages */ #define PD_SMS (0x9) /* SMS messages */ #define PD_GPRS_SM (0xa) /* GPRS Session Management messages */ #define PD_SS (0xb) /* non call related SS messages */ #define PD_LS (0xc) /* Location services */ #define PD_TST (0xf) /* Reserved for test procedures described in GSM 11.10 */ /* * Value constants for VAL_cs */ #define CODING_SCHEME_SMSCB (0x0) /* Coding scheme cell broadcast short messages */ #define CODING_SCHEME_UCS2 (0x1) /* Coding scheme UCS2, 16 bit, ISO ISO/IEC10646 */ /* * Value constants for VAL_add_ci */ #define ADD_CI_NO (0x0) /* Country's Initials are not to be added */ #define ADD_CI_YES (0x1) /* Country's Initials are to be added */ /* * Value constants for VAL_save_time_value */ #define TIME_ADJ_NO (0x0) /* No adjustment for Daylight Saving Time */ #define TIME_ADJ_1 (0x1) /* +1 hour adjustment for Daylight Saving Time */ #define TIME_ADJ_2 (0x2) /* +2 hours adjustment for Daylight Saving Time */ /* * user defined constants */ #define L3MAX (0xfb) #define MAXNAME (0x28) #include "CDG_LEAVE.h" #endif