FreeCalypso > hg > fc-magnetite

view cdg-hybrid/cdginc/m_tst.val @ 680:ee3ac8c617cb

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
armio.c: set GPIO2 output high initially On TI-canonical platforms GPIO2 is DCD modem control output. In TI's original code the AI_InitIOConfig() function called from Init_Target() would configure GPIO2 as an output and set the initial output value to low, but then the init code in uartfax.c called from Init_Serial_Flows() would immediately change it to high, corresponding to DCD not asserted. The result is a momentary asserted-state glitch on the DCD output. The present change eliminates this glitch, setting DCD output to not-asserted initially like it should be.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 25 Jun 2020 03:17:43 +0000
parents e7a67accfad9
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : m_tst.val                                                      |
| SOURCE  : "msg\tst.mdf"                                                  |
| LastModified : "2000-10-23"                                              |
| IdAndVersion : "8441.603.99.005"                                         |
| SrcFileTime  : "Wed Nov 28 10:21:30 2007"                                |
| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef M_TST_VAL
#define M_TST_VAL


#define CDG_ENTER__M_TST_VAL

#define CDG_ENTER__FILENAME _M_TST_VAL
#define CDG_ENTER__M_TST_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__M_TST_VAL__LAST_MODIFIED _2000_10_23
#define CDG_ENTER__M_TST_VAL__ID_AND_VERSION _8441_603_99_005

#define CDG_ENTER__M_TST_VAL__SRC_FILE_TIME _Wed_Nov_28_10_21_30_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__M_TST_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_no_of_pdus
 */
#define VAL_NO_OF_PDUS___DEF           (0x0)      /* Number of PDUs to transmit     */
#define TEST_INFINITIVE_NO             (0x0)      /* ciphering not used             */

/*
 * Value constants for VAL_dl_timeslot_offset
 */
#define TEST_TN0                       (0x0)      /* downlink timeslot offsett 0    */
#define TEST_TN1                       (0x1)      /* downlink timeslot offsett 1    */
#define TEST_TN2                       (0x2)      /* downlink timeslot offsett 2    */
#define TEST_TN3                       (0x3)      /* downlink timeslot offsett 3    */
#define TEST_TN4                       (0x4)      /* downlink timeslot offsett 4    */
#define TEST_TN5                       (0x5)      /* downlink timeslot offsett 5    */
#define TEST_TN6                       (0x6)      /* downlink timeslot offsett 6    */
#define TEST_TN7                       (0x7)      /* downlink timeslot offsett 7    */

/*
 * Value constants for VAL_mode_flag_val
 */
#define TEST_RANDOM                    (0x0)      /* pseudorandom data              */
#define TEST_LOOP                      (0x1)      /* loop back                      */

/*
 * user defined constants
 */
#define L3MAX                          (0xfb)     
#define MAX_N_PDU_NUMBER_LIST          (0xb)      

#include "CDG_LEAVE.h"


#endif